Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Medical / Health Care
- Agriculture
- Air and Climate
- Oil, Gas & Refineries
- Food and Beverage
- Chemical & Pharmaceuticals
- Environmental
- Waste and Recycling
- Energy
- Mining
- Metal
- Soil and Groundwater
- Construction & Construction Materials
- Glassware
- Health and Safety
- University / Academia / Research
- Paint
- Pulp & Paper
- Electronics and Computers
- Plastics & Resins
- Aerospace & Air Transport
- Automobile & Ground Transport
- Communications / Telecom / Datacom
- Government
- Banking & Finance / Insurance / Legal
- Forestry & Wood
- Maritime/Shipbuild/Water Transport
- Furniture
- Commercial
Xprt Product Applications In Lithuania
591 applications found
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. Use of extractive monitoring systems in such an environment requires a lot of maintenance and the instruments are prone to malfunction. However, unlike extractive systems, OPSIS non-contact monitoring technology has no problem handling these ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
In order to maintain high quality of milk products, it is necessary to monitor process quality as rapidly as possible, so that a relevant technological process could be promptly corrected. The most important quality factors of milk products are fat, protein, moisture (total solids), SNF, sugar, salt, lactose and titrated acidity. Commonly, it takes a few hours to make such type of analyses by traditional methods. The use of an InfraLUM® NIR analyzers reduces the analysis time to a couple of ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
NIR-analyzer InfraLUM FT-12 is used for quality control of flour and by-products at all milling stages. With InfraLUM FT-12 analyser is possible to create, localize, and update calibration models. Installation and calibration using Customer’s samples are made at the Customer’s lab. ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Introduction The method is used for the determination of the mass fraction of total amino acids: arginine, lysine, tyrosine, phenylalanine, histidine, leucine and iso-leucine (as a sum), methionine, valine, proline, alanine, glycine, cystine, tryptophan, aspartic, and glutamic acids in feedstuffs, compound feeds, fodders, premixes, and all types of feed raw materials by capillary ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION High mercury concentration can be found in such cosmetic products as skin lightening soaps and creams, makeup cleansing products, and mascara. Mercury in cosmetics exists as inorganic and organic compounds. Inorganic mercury (e.g. ammoniated mercury) is used in skin lightening soaps and creams. Organic mercury compounds, such as thiomersal, are used as cosmetic preservatives in makeup cleansing products and ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION Blood is one of the most complex substances for determination of the Hg content. At the same time, blood is the most important diagnostic medium used for monitoring the effect of Hg vapor on the human organism. In almost all the countries, personnel of mercury-involving production facilities are regularly examined for the Hg content in blood, which should not exceed 20–50 µg/l, whereas in the case of a person unexposed to mercury vapor the blood normally contains 1–3 µg/l of ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Capillary electrophoresis analyses of particularly complex samples can be highly problematic due to the presence of many compounds, deteriorating the separation inside the capillary. Fermentation liquid is one of such samples, full of proteins, cell debris, and lipids. At the same time accurate analysis of fermentation liquid for the presence of inorganic anions, or cations, or organic acids can be of utmost importance to ensure the correct way of the whole process. For example, the elevated values ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: The method allows determination of water-soluble forms of inorganic (chloride, sulfate, nitrate, fluoride, and phosphates) and organic (acetate, formate, and oxalate) anions in soils, clays, peats, wastewater silts, activated sludges, and bottom sediments by capillary electrophoresis ...
ByLumex Instruments based in  Mission, BRITISH COLUMBIA (CANADA)