Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Oil, Gas & Refineries
- Air and Climate
- Energy
- Agriculture
- Food and Beverage
- Mining
- Environmental
- Electronics and Computers
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Medical / Health Care
- Glassware
- Soil and Groundwater
- Defense
- University / Academia / Research
- Aerospace & Air Transport
- Paint
- Textile
- Plastics & Resins
- Health and Safety
- Packaging
- Waste and Recycling
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Commercial
- Dry Cleaning
- Leather & Tanning
- Travel & Leisure
- Government
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
Xprt Product Applications In Malaysia
1,513 applications found
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Component placement verification in electronic assemblies presents metrology challenges that are almost as wide and varied as the range of electronic designs and the types of components used. Key process control parameters that must be measured include component positioning and rotation (X, Y, and theta) relative to pads, as well as checking for missing and/or damaged ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Leadframe inspection presents a wide variety of feature sizes and geometry, requiring metrology systems that can be flexibly programmed for fast and accurate three-dimensional measurements. Die-to-pad placement/alignment, lead positions/sizes, lead tilt and twist angles, pitch, lead widths, lead-coplanarity, and dam-bar dimensions all represent critical factors that must be tightly controlled. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
As today’s semiconductor designs continually become smaller and denser, the challenges of wafer inspection are constantly escalating. Extremely small feature sizes can require 50X or higher objective lens magnification and highly programmable top-lighting/back-lighting, along with ultra high-resolution accuracy and ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Flex circuit technologies pose a wide range of metrology challenges with a large number of different circuit geometries, pitch dimensions, and surface reflectivity factors. To meet these challenges, metrology systems for flex circuit inspection must incorporate advanced functionality such as versatile lighting, large-size stages, high-resolution positioning, and very accurate laser probe capabilities. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Inspection processes for read/write heads require high-precision non-contact metrology functions to control tight Z-axis tolerances in the read/write gap measurements and Z dimension variations from the side rails to the top surface of pole-tip ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Quality assurance and inspection of critical automotive components such as precision nozzles require metrology systems that can effectively combine both extremely accurate measurement and a high-level of process flexibility. To ensure robust performance over extended usage under very demanding environmental conditions, injector components must be controlled to very close tolerances across a number of different features, such as multiple diameters, length, taper, angles, and aperture ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
The inspection of electrical test probes requires precision metrology capabilities to accurately measure small features such as the positioning, pitch, and coplanarity of test lead ends. Fast and repeatable precision inspection processes often require a combination of multiple magnifications, high-performance video auto-focus with 50X lens, and/or through-the-lens laser options for rapid Z-axis ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
applications that include: Agricultural and landscape irrigation Aquaculture Industrial water processing Industrial wastewater treatment Municipal water treatment (drinking and waste treatment) Prefiltration to protect costly media and reverse-osmosis ...
ByAmiad Water Systems Ltd. based in  , ISRAEL
EDUR pumps have been used preferentially in municipal and industrial water supply and water treatment for decades. Traditionally the reasons are the sturdiness and the long service life of our pumps and the special capability of some models for transporting liquid-gas ...
ByEDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG based in  Kiel, GERMANY
In shipbuilding, high standards of reliability as well as increasingly the energy efficiency of the systems are important prerequisites for the economical-technical overall evaluation in the technical procurement process. Ships as self-sufficient systems are particularly dependent on the reliable functioning of all installed components, including the pumps. They fulfil many tasks on board which are vital for the operation of the vessel: Delivery of ballast water and wastewater, boiler supply, condensate recovery, ...
ByEDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG based in  Kiel, GERMANY
BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment. Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results. ...
ByThe BioSolve Company based in  Lexington, MASSACHUSETTS (USA)
For over twenty years, BioSolve Pinkwater has been used for Surfactant Enhanced Remediation (SER) to mobilize and solubilize residual NAPL[i], facilitating its recovery and disposal. Depending on soil and plume characteristics, Pinkwater solution can reach contaminated zones through deep injection wells or be gravity fed from surface level injection galleries. After desorbing residual NAPL from soil surfaces on contact, Pinkwater then solubilizes the hydrocarbons in an aqueous emulsion, enabling extraction at down ...
ByThe BioSolve Company based in  Lexington, MASSACHUSETTS (USA)
ByIn-Situ Process based in  Fort Collins, COLORADO (USA)
Historically, landfills have been the most common method of organized waste disposal and remain so in many places around the world. Landfills are essential applications to ensure long service life and prevent soil pollution. In industrial basins, TenCate protection geotextiles guarantee the protection of the geomembrane against all risks of mechanical damages. A cost effective and environmental friendly solution to sort, treat and recycle ...
ByTenCate Geosynthetics Netherlands bv based in  Hengelo, NETHERLANDS
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)