Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Oil, Gas & Refineries
- Air and Climate
- Energy
- Agriculture
- Food and Beverage
- Mining
- Environmental
- Electronics and Computers
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Medical / Health Care
- Glassware
- Soil and Groundwater
- Defense
- University / Academia / Research
- Aerospace & Air Transport
- Paint
- Textile
- Plastics & Resins
- Health and Safety
- Packaging
- Waste and Recycling
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Commercial
- Dry Cleaning
- Leather & Tanning
- Travel & Leisure
- Government
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
Xprt Product Applications In Malaysia
1,517 applications found
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Particle Measuring Systems has been involved in particle counting for aerospace and defense applications for 40 years. This includes everything from spacecraft assembly to building a particle monitor for use on other planets. In 1978, a PMS particle counter was onboard the Pioneer Venus Project. Our latest technologies meet the needs of a new competitive era, where both private and government aerospace entities can thrive. We understand the unique challenges of this ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
ByParticle Measuring Systems (PMS) based in Niwot, COLORADO (USA)
Slurry Flow and Potash Flurry Flow can sometimes contain lots of particles that make this measurement application quite abrasive and damaging to contacting equipment. A non-contacting solution is ideal for this sort of application, no moving parts and no contact with the measurement susbtance means the life expectancy of the product is extended. In addition, the non-contact nature of Pulsar Measurement products means that operators do not come into contact with the process and there is zero downtime of the ...
ByPulsar Measurement based in Birmingham, UNITED KINGDOM
Whether you work in heavy industry, transport and logistics or construction, ground vibration monitoring is a key activity. To control the environmental impact of ground-bourne vibration, such as nuisance vibration or building damage, it’s vital to ...
ByCirrus Research plc based in Hunmanby, UNITED KINGDOM
We understand that keeping your supply chain efficient is key to improving productivity and reducing your unnecessary ...
ByOvarro based in Eckington, UNITED KINGDOM
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in Vleuten, NETHERLANDS
RO Reclaim/Zero Liquid Discharge (ZLD) with Lime Softening for Industrial Processes including Power Plants, Mining Industry, Steel Industry. Typical recycling, reuse and process water systems use Reverse Osmosis (RO) technology as the method of decreasing the level of ions in process water. RO recovery rates normally range from 50-75%, therefore 25-50% of the RO feed water is discharged as wastewater. With the increasing cost of water and waste discharge, more companies are looking to recover and reuse RO reject ...
ByPorex - Filtration Group based in Fairburn, GEORGIA (US) (USA)
Project finished in 2015 in Hungary includes: - ROVAPO® concentration of evaporator effluent from DDGS production with capacity of 1200m3/d - EGSB reactor treating thin stillage and ROVAPO® ...
BySymbiona SA based in Warszawa, POLAND
Problem: A significant portion of the operational costs of a conventional municipal wastewater treatment plant employing an aerobic biological treatment unit comes from electricity costs associated with aeration. In many cases, the aeration rates are kept at the maximum level to ensure that the plant’s effluent is in compliance with the regulations. The critical parameter for regulatory purposes and treatment efficiency, BOD, takes 5 days to measure through standard methods providing almost no value to the ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
In industrial operations, a significant quantity of product can be lost into the waste stream. The reason for the product loss can vary from leaky or faulty valves, to vessels overflowing, or to operator errors. Washing processes also create unavoidable product loss. Most of these losses are not large spills and it may take a while for the operators to detect them. In fact, frequent small losses can account for more than 50% of total losses. Significant benefits can be derived from continuous water quality ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Wastewater quality can change drastically and quickly – particularly in the case of industrial discharges – that generate shock loads within the wastewater treatment system. In addition to potential operational problems such as increased chemical and aeration demand, shock loads also have the potential to affect regulatory compliance if wastewater cannot be treated properly. Real Tech’s BOD/COD monitoring systems provide continuous online measurement of COD and/or BOD, which are the most relevant parameters to ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
In industries such as pulp and paper toxic or difficult to treat contaminants can end up in the waste stream. Not being able to detect these toxic release events or other unexpected events in a timely manner can disrupt the biological treatment system and cause compliance issues or permit violations. Significant benefits can be derived from continuous water quality monitoring with an online sensor system. Real Tech provides practical, low cost solutions for continuously monitoring important industrial wastewater ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Wastes that are rich in starch such as those that occur in potato processing industries require a balanced addition of other macronutrients such as nitrogen and phosphorus. In order to optimize the dosing of these nutrients it is essential to have a good idea about the organic load entering the biological treatment reactor. Measurement of colour can help with quality control and flavour ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)