Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Oil, Gas & Refineries
- Air and Climate
- Energy
- Agriculture
- Food and Beverage
- Mining
- Environmental
- Electronics and Computers
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Medical / Health Care
- Glassware
- Soil and Groundwater
- Defense
- University / Academia / Research
- Aerospace & Air Transport
- Paint
- Textile
- Plastics & Resins
- Health and Safety
- Packaging
- Waste and Recycling
- Communications / Telecom / Datacom
- Forestry & Wood
- Printing
- Maritime/Shipbuild/Water Transport
- Commercial
- Dry Cleaning
- Leather & Tanning
- Travel & Leisure
- Government
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
Xprt Product Applications In Malaysia
1,517 applications found
In industrial operations, a significant quantity of product can be lost into the waste stream. The reason for the product loss can vary from leaky or faulty valves, to vessels overflowing, or to operator errors. Washing processes also create unavoidable product loss. Most of these losses are not large spills and it may take a while for the operators to detect them. In fact, frequent small losses can account for more than 50% of total losses. Significant benefits can be derived from continuous water quality ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Wastewater quality can change drastically and quickly – particularly in the case of industrial discharges – that generate shock loads within the wastewater treatment system. In addition to potential operational problems such as increased chemical and aeration demand, shock loads also have the potential to affect regulatory compliance if wastewater cannot be treated properly. Real Tech’s BOD/COD monitoring systems provide continuous online measurement of COD and/or BOD, which are the most relevant parameters to ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
In industries such as pulp and paper toxic or difficult to treat contaminants can end up in the waste stream. Not being able to detect these toxic release events or other unexpected events in a timely manner can disrupt the biological treatment system and cause compliance issues or permit violations. Significant benefits can be derived from continuous water quality monitoring with an online sensor system. Real Tech provides practical, low cost solutions for continuously monitoring important industrial wastewater ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Wastes that are rich in starch such as those that occur in potato processing industries require a balanced addition of other macronutrients such as nitrogen and phosphorus. In order to optimize the dosing of these nutrients it is essential to have a good idea about the organic load entering the biological treatment reactor. Measurement of colour can help with quality control and flavour ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Project finished in 2015 in Hungary includes: - ROVAPO® concentration of evaporator effluent from DDGS production with capacity of 1200m3/d - EGSB reactor treating thin stillage and ROVAPO® ...
BySymbiona SA based in  Warszawa, POLAND
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in  Whitby, ONTARIO (CANADA)
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
RO Reclaim/Zero Liquid Discharge (ZLD) with Lime Softening for Industrial Processes including Power Plants, Mining Industry, Steel Industry. Typical recycling, reuse and process water systems use Reverse Osmosis (RO) technology as the method of decreasing the level of ions in process water. RO recovery rates normally range from 50-75%, therefore 25-50% of the RO feed water is discharged as wastewater. With the increasing cost of water and waste discharge, more companies are looking to recover and reuse RO reject ...
ByPorex - Filtration Group based in  Fairburn, GEORGIA (US) (USA)
Clouds are an integral part of the atmosphere, critical components of the hydrological cycle, and a major modifier of climate. Clouds form and develop in complex ways that depend on the characteristics of the ambient aerosol population and on the thermodynamic and dynamic structure of the atmosphere. The hydrologic cycle depends on the formation of precipitation that in turn is directly related to the microphysical properties of clouds. The accuracy of weather forecasting and climate simulations are dependent on ...
ByDroplet Measurement Technologies (DMT) - part of ENVEA based in  Longmont, COLORADO (USA)
Reliably delivering liquids in different states for various tasks with high efficiency – technical, economical and energy saving. EDUR have held a leading position in this field over ...
ByEDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG based in  Kiel, GERMANY
We understand that keeping your supply chain efficient is key to improving productivity and reducing your unnecessary ...
ByOvarro based in  Eckington, UNITED KINGDOM
Munters equipment precisely controls temperature and humidity to provide optimal conditions, prevent the growth of harmful bacteria and viruses, and also improve doctor and patient ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Catalytic converters in cars are used for the reduction of hazardous emissions, such as carbon monoxide (CO), hydrocarbons (HxCy), and nitrogen oxides (NOx). These harmful substances are converted into neutral carbon dioxide (CO2), water, and nitrogen by catalytic chemical reactions, which are accelerated by three platinum group metals (PGM): platinum, palladium, and rhodium. In the context of recycling, specialized analyzer for catalytic converter, often based on XRF technology, are invaluable for accurately ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Create more efficient power ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in  Porto, PORTUGAL
The Only Complete Pharmaceutical Industry Contamination Control Provider. Particle Measuring Systems partners with industry companies as a complete contamination monitoring solutions provider. Starting with our Advisory Services team, then collecting data with our viable and non viable particle counters, thru to complete data management and reporting. We have the expertise to help you meet regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1 and get your product to ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)