Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Air and Climate
- Food and Beverage
- Energy
- Agriculture
- Construction & Construction Materials
- Metal
- Mining
- Pulp & Paper
- Environmental
- Glassware
- Medical / Health Care
- Automobile & Ground Transport
- Aerospace & Air Transport
- Electronics and Computers
- Paint
- Chemical & Pharmaceuticals
- Waste and Recycling
- Plastics & Resins
- University / Academia / Research
- Commercial
- Communications / Telecom / Datacom
- Textile
- Government
- Defense
- Travel & Leisure
- Soil and Groundwater
- Forestry & Wood
- Health and Safety
- Printing
- Maritime/Shipbuild/Water Transport
- Packaging
- Leather & Tanning
- Retail
Xprt Product Applications In Mexico
1,344 applications found
Premium
Our membranes systems are used to treat wastewaters containg paint, inks, and dye components from tank vessel and cylinder cleanup in printing processes to dye rinsing in textile mills, by separating and concentrating color components from the waste and producing clear filtrate for discharge or recycle. Concentrated high value inks and dyes are often suitable for recovery and ...
ByKovalus Separation Solutions, Inc. based in  Wilmington, MASSACHUSETTS (USA)
Premium
Our filtration and separation solutions for parts cleaning operations function as point-source kidney systems, maintaining pristine bath cleaning solutions by continuously removing and concentrating oils and other contaminants cleaned off the parts, that build to the point where finished part quality is compromised and high temperature baths and cleaning chemicals are dumped and lost. By recovering clear, suspended solids free, and heated cleaner filtrate for recycle, bath dumps are virtually eliminated, water, ...
ByKovalus Separation Solutions, Inc. based in  Wilmington, MASSACHUSETTS (USA)
Premium
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)
Premium
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)
Premium
Process monitoring and monitoring of emissions from aluminium smelters can be a challenge due to high concentrations of for example hydrogen fluoride (HF) and dust. The use of sampling systems in such environments requires a lot of maintenance and is therefore costly. Such systems can also be unreliable. OPSIS offers better ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Demanding monitoring environment at cement industries. Process control and emissions monitoring at a cement plant can be a challenge due to high dust levels and corrosive gases. OPSIS offers gas analysis systems that can handle these environments and that have high accuracy, short response times, and long maintenance ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. The use of extractive systems in such environments requires a lot of ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. Use of extractive monitoring systems in such an environment requires a lot of maintenance and the instruments are prone to malfunction. However, unlike extractive systems, OPSIS non-contact monitoring technology has no problem handling these ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
ByENVEA based in  Poissy, FRANCE
Premium
In the pharmaceutical industry, finished powders are often transferred from the mixing area to tableting machines via vacuum transfer systems. Transfer lines incorporate a high efficiency HEPA filter after the vacuum pump to prevent exposure to potentially harmful dust in the workplace. HEPA filters can become less effective due to operational wear and tear or through possible mishandling during maintenance work. An effective solution to remotely monitor the HEPA filter performance can enable proactive filter ...
ByENVEA based in  Poissy, FRANCE
Premium
We are here as your partner in keeping your clients happy and their basins well aerated. We helped start the fine-bubble aeration revolution, and continue to drive innovation to increase efficiency, lower costs, and provide engineers with the most comprehensive set of aeration tools in the ...
ByEnvironmental Dynamics International (EDI) - Axius Water based in  Columbia, MISSOURI (USA)
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in  Furulund, SWEDEN