- Home
- netherlands
- Applications
Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Medical / Health Care
- Energy
- Waste and Recycling
- Environmental
- Air and Climate
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Mining
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Defense
- Glassware
- Metal
- Aerospace & Air Transport
- Packaging
- Plastics & Resins
- Health and Safety
- Commercial
- Maritime/Shipbuild/Water Transport
- Textile
- Electronics and Computers
- Paint
- Logistics
- Communications / Telecom / Datacom
- Government
- Forestry & Wood
- Retail
- Printing
- Banking & Finance / Insurance / Legal
- Real Estate
- Travel & Leisure
- Furniture
- Dry Cleaning
Xprt Product Applications In Netherlands
2,136 applications found
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Bread contributes about one-sixth of daily salt intake and is used to improve flavour and texture. The amount of sodium in bread can differ significantly, depending upon brand and type of grain used, ranging from 592mg/100g to 748mg/100g. The level of sodium in bread is primarily due to the amount of salt added to the dough during manufacture. The amount of potassium is determined by the type of flour and the washing and bleaching operations during cereal processing. Bread does not make a significant contribution ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Sodium chloride is an essential ingredient of all processed foods; it is needed to enhance flavour and increase shelf life. In many processed foods, additional sodium is added as a flavour enhancer; potassium and calcium are also naturally present but not normally used as processing ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
The accurate measurement of a gas mixture is essential to metal and mineral processing. Reliable measurements are needed to manage processes ranging from effective combustion control to optimized process ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
The solar panel manufacturing industry includes owners and operators of solar-power-generating facilities in the form of either photovoltaic panels or solar thermal power stations that make use of mirrors or lenses to concentrate the sun's energy. Operators then sell the energy to downstream customers. These businesses require systems and solutions to meet their photovoltaic panel manufacturing process emissions and pollution control challenges, including volatile organic compound (VOC) abatement; and acid gas ...
ByCECO Environmental based in  Addison, TEXAS (USA)
The furniture manufacturing industry includes facilities that manufacture household furniture; office furniture; mattresses, shades, and blinds; custom architectural woodwork and millwork; and institutional furniture. CECO offers a wide range of safe, clean and efficient systems and solutions designed to meet a variety of air emissions and pollution control challenges, including mist elimination; volatile organic compound (VOC) abatement; acid gas scrubbing; dry particulate filtration; and industrial dust, fume, ...
ByCECO Environmental based in  Addison, TEXAS (USA)
Azzuro’s Sulfatech Biogas Desulfurization system takes care of numerous gases such as hydrogen sulfide and siloxanes that will damage gas powered generators and other gas powered equipment. The Sulfatech system offers a highly efficient and cost-effective alternative to historical methods of reducing sulfur emissions. In contrast to amine treatment, thermal oxidation, or caustic scrubbing, Azzuro’s technology provides expanded capabilities for treatment of gas, biogas or boilergas while offering higher ...
ByAzzuro APC LLC based in  Scottsdale, ARIZONA (USA)
The pharmaceutical industry poses many chemical hazards which can be detected using our PID technology. Our range of personal, portable of fixed VOC detectors will give an unrivalled solution when you want to detect a mixture of uncommon hydrocarbons. Use our tried and tested VOC detectors if you want to measure VOC concentration in a production facility or storage ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
The DeltaQuad Pro #MAP can survey up to 100KM of pipeline, and monitor remote sites at up to 50KM distance, using high resolution Thermal and RGB video. ...
ByVertical Technologies based in  Badhoevedorp, NETHERLANDS
Process monitoring in the petrochemical industry. Monitoring of syngas and other gas processes for safety, quality assurance and process optimization. ...
ByIonicon Analytik Ges.m.b.H. based in  Innsbruck, AUSTRIA
Introduction: Hydrazine is an inorganic compound consisting of just Hydrogen and Nitrogen. It is a clear and oily liquid with a high vapor pressure. Hydrazine is very reactive and very toxic, even at low ppb- levels already. It is carcinogenic, irritant at mucous membranes and damages lungs, the nervous system, kidneys and the liver. Hydrazine is used for various technical and chemical purposes such as a corrosion inhibitor in tubes and containers, in chemical production processes as reducing agent or Hydrogen ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Introduction: Phosgene is the common name for Carbonic Dichloride, a gaseous compound. It is very toxic at ppb- concentrations already. Phosgene is a very important precursor in the chemical industry for the production of e.g. polyurethanes, pharmaceutics colors, etc. and therefore widely used. Even though it is handled in hermetic closed systems only, several generators for Phosgene are in operation worldwide to at least avoid all risks caused by transportation also. The effects of intoxication can occur hours or ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Introduction: TCP (1,2,3- Trichloropropane) and DCP (2,3- Dichloropene) are liquid compounds from the group of Chlorinated Hydrocarbons, defined as carcinogenic and mutagenic at low concentrations already. Due to the pretty high vapor pressure of these liquids, a significant health- risk is created by handling. TCP and DCP are widely used as chemical precursors in production processes for the synthesis of various products, such as chlorinated solvents and Agrochemicals. Furthermore DCP is also used as a ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Airborne Molecular Contamination (AMC) is a general term for existing molecular contaminations in clean room environments. These compounds belong to very different groups with very different mechanisms of damage. AMC is a concern for any high technology manufacturing process, especially in the microelectronic industry and is getting more and more in the focus of interest. AM-contaminations may cause adverse effects on production tools and consequently increase costs for high-tech companies. These airborne ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
SCION Instruments offers the solution for trace impurities in high-purity benzene by gas chromatography (GC). After manufacturing products might contain trace impurities. The UOP555 describes the determination of individual and total trace hydrocarbon ...
BySCION Instruments BV - Techcomp Group based in  GP Goes, NETHERLANDS
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
HORIBA’s highly accurate Nitrous Oxide (N2O) analyzers represented in various types from stationary to portable, contribute to the environment protection and GHG emissions mitigation by quantification of N2O emission from wastewater treatment ...
ByHORIBA Europe GmbH based in  Leichlingen, GERMANY