- Home
- Applications
- netherlands
- activated sludge
Show results for
Refine by
Activated Sludge Product Applications In Netherlands
17 applications found
Premium
Introduction: The method allows determination of water-soluble forms of inorganic (chloride, sulfate, nitrate, fluoride, and phosphates) and organic (acetate, formate, and oxalate) anions in soils, clays, peats, wastewater silts, activated sludges, and bottom sediments by capillary electrophoresis ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can again be managed using the Strathtox Respirometer. ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Respiration rate monitoring of Antwerp treatment works showed periods when the activated sludge was up to 40% inhibited, with resultant sludge washout episodes. ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Respiration rate of activated sludge has been recognised as a key controlling element in the modelling of process control, by the International Water Association Task Group. Actual respiration rate of the sludge in the aeration tanks, as well as the endogenous and maximum respiration rates are variables that indicate the rate of BOD removal and aeration requirements. ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
The samples would be tested against the activated sludge of the receiving works, using the Respiration Inhibition Test or the Nitrification Inhibition ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Samples of the industrial effluent are collected at source, for testing on the actual bacteria of the receiving activated sludge. The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Premium
Water is a precious commodity. To protect our natural waters and to support drinking water production, all wastewater is therefore first cleansed of containments and pollutants before it is returned to the water cycle. To treat the water and to achieve the best possible, natural water quality, different processes are used. Generally, the treatment of wastewater can be divided into two basic types . Firstly, problematic substances are removed from the water. This is done with cleaning, iron removal, manganese ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
According to a study by the German Environment Agency , wastewater treatment plants are responsible for around 1% of Germany's total electricity consumption. What initially sounds like a very small percentage, however, offers a highly attractive savings potential from the point of view of individual wastewater treatment plant operators. One typical example of the savings potential in wastewater treatment plants is tank aeration. For example, state-of-the-art blower technologies and demand-driven control technology ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
Introduction: The content of water-soluble forms of inorganic cations is one of the substantial characteristics in agrochemical, land reclamation, and sanitary assessments of soils (arable, hayland, pasturable, forest nursery soils). The cation balance should be controlled during ecological soil monitoring for the human activity impact ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic® or Kalkmilch), caustic soda, powder activated carbon and polymers. Sludge transfer. Filter press ...
ByVerder Liquids BV - part of the Verder Group based in Vleuten, NETHERLANDS
The production of food and beverage consumes high volumes of process water and then generates highly polluted organic waste water. The high peaks of wastewater increase the cost of treatment, and should also ensure that there is much storage required for equalization of the contaminated water. The wastewater from food & beverage plants often contains high concentrations of biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solids (TSS), fats, oils and nutrients in varying ...
ByBerghof Membranes Technology GmbH (BMT) based in Leeuwarden, NETHERLANDS
If industrial wastewater entering a treatment works contains toxic components the rate of biodegradation will be inhibited or stop completely. This can result in failed consents and will certainly give rise to operational problems. Visible indications include deflocculation, bulking and the appearance of filamentous bacteria. Sometimes, there are no visible effects. When the sludge bacteria are inhibited, there is the possibility of toxicity carryover in the effluent that is discharged to receiving waters. With ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
Bredel hose pumps reduce overall operating costs from reduced downtime and the elimination of ancillary costs when feeding primary or thickened sludge to digesters or dewatering devices like centrifuges & filter ...
ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM
Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
In an effort to minimize their short and long-term environmental impact, industries across the globe are facing increasing challenges and costs in the treatment of their process wastewater. As a result, many of these industries have built their own treatment systems in order to treat and reuse process streams, reducing discharge costs to municipal treatment plants and recovering valuable products from ...
ByBerghof Membranes Technology GmbH (BMT) based in Leeuwarden, NETHERLANDS
MICROCAT microbial formulations from Bioscience, Inc., are blends of specialized, naturally occurring microbes and other ingredients that work together to solve the most common, damaging problems inherent to municipal wastewater plants. By augmenting existing microbial populations, MICROCAT products naturally aid in stabilizing municipal sewage treatment and collection systems, enhancing their ability to break down difficult-to-degrade wastes and handle highly variable waste treatment ...
ByMonera Technologies based in Allentown, PENNSYLVANIA (USA)