- Home
- Applications
- netherlands
- glassware
Show results for
Refine by
Glassware Product Applications In Netherlands
23 applications found
Premium
Mass flow meters and controllers are important tools in a broad range of catalyst research from measuring the flow through carbon nanotubes to modeling high-pressure, high-temperature catalyst ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Premium
Accurate and repeatable mass flow control is vital in manufacturing expensive specialty gas such as headlights, windshields and perfume bottles. The fuel-to-air ratio controls the glass temperature, so precise gas control is paramount for quality in our mass flow controllers and ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Premium
Glass for buildings; flat glass manufacturing. Architectural glass is used as a building material, typically for windows, furniture or internal partitions. It often needs to be tempered or laminated to ensure safety, or bent to fit application ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Glass tempering (toughening) and bending processes. Toughened (tempered) glass is glass that has been heat treated to increase its strength. Tempered glass is harder to break, and crumbles into small chunks instead of jagged ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Glass tableware (dishes, glasses) manufacturing. Glass tableware requires consistent product quality for regular use, and may need a high standard of manufacture for decorative purposes. This quality is dependent on temperature control at critical ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Flat glass (float glass) manufacturing. Flat glass is manufactured by allowing it to solidify on a layer of higher-density liquid, usually molten tin. This process is used to create clear, tinted and coated ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
ByENVEA based in Poissy, FRANCE
Premium
Specialty glass production (unique compositions or uses). Speciality glass is a wide-ranging term encompassing glass with non-standard constituent materials, or glass that undergoes special treatment to make it suitable for a particular application. ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Glass fiber and mineral wool insulation production. Fibreglass is made from melted glass spun at high speed to create fibres. Rockwool (also called mineral wool) is created in the same way, using melted rock. Both have excellent insulation ...
ByLAND® based in Dronfield, UNITED KINGDOM
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in Breda, NETHERLANDS
Technical ceramics covers a wide range of advanced ceramic materials developed for their excellent mechanical, electrical and thermal properties. They are often highly resistant to melting, bending, stretching, corrosion and wear. The use of advanced ceramics in aerospace, automobile, defence and energy markets is becoming increasingly widespread. Carbolite Gero furnaces are widely used in both research and production for the debinding and sintering of technical ceramics. For the debinding process (of green parts) ...
ByCarbolite A Verder Company based in Hope, UNITED KINGDOM
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in Furulund, SWEDEN
The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Energy savings solutions in glass industry with VPInstruments. In a glass packaging plant, a VPVision system with over 20 compressed air flow meters keeps an eye on compressor efficiency and ...
ByVPInstruments based in Delft, NETHERLANDS
This technique allows use of aqueous standards for calibration rather than relatively unstable organometallic standards and harmful solvents for the extraction. Microemulsions are thermodynamically stable systems composed of water, oil and surfactant. In some cases, an alcohol is added as a ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
The sample of biodiesel is weighed into a crucible and placed in a heating muffle furnace. Two temperatures are used in the heating program for the dry decomposition: the first temperature (250ºC) is maintained for 1 hour to dry the sample. After this the temperature is progressively elevated to 600ºC and maintained for 4 hours to eliminate the remaining organic material. ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Moisture content analysis for medical devices has never been easy. The resins are sophisticated and very expensive, the customers are demanding, and a minuscule cosmetic defect can mean the difference between thousands of dollars of saleable finished goods and scrap. When working with the complex, high-volatile-content materials that make up modern medical devices, every part per million counts, and every gram of resin counts. That’s why Computrac designed the Vapor Pro ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
A Chemical-Free Alternative to Karl Fischer. Accurate control of moisture in lubricating oils is critical to keeping your most important machines in optimal condition, but historically there have been few good options for measuring moisture content. The “crackle test” is easy, but not accurate enough to keep modern machines running at their best. Karl Fischer titration is very accurate, but difficult to use, expensive to operate, and requires hazardous chemical ...
ByAMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA)
Cheese was wet ashed with a combination of acid and a high temperature oven to form a dissolvable product ready for analysis via flame ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM