- Home
- Applications
- netherlands
- spectrometer
Show results for
Refine by
Spectrometer Product Applications In Netherlands
33 applications found
Premium
This analytical procedure is intended for measuring the content of the elements (cadmium, lead, arsenic, tin, chromium and mercury) in the samples of food products by atomic absorption spectrometry with electrothermal atomization using an “MGA-915M” Graphite Furnace AA Spectrometer. The method is based on measuring resonance radiation absorption that occurs when the radiation passes through a layer of atomic vapor in the electrically heated graphite furnace of the ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Determination of the dissolved forms of the elements in samples with salinity up to 50‰ (including water from oceans and estuaries) is performed using MGA-1000 Graphite Furnace AA Spectrometer. The measurement ranges of the procedure cover all the specified maximum allowable concentration levels and provide accurate determination of the elements at the concentration levels close to natural. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Lumex Instruments provides user-friendly analytical solution for EN 14078:2014 implementation using FTIR spectrometer InfraLUM FT-08 and powerful SpectraLUM software package. The method is based on measuring the transmission spectra of a sample of diesel fuel in the mid-IR spectral range. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Embracing the challenge of measuring both trace and macroelements in one instrument, Lumex Instruments presents the Graphite Furnace Atomic Absorption Spectrometer (GFAAS) ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Whether it is a carpet or plastic, classification and identification of recyclable material can be achieved using Bruker Optics' state of the art spectrometer systems. Bruker Optics has applied the FT-NIR technology and experience to this demanding requirement, and offers the Carpet Analyzer as a dedicated solution for the recycling ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
Premium
There is a long history of spice adulteration, which dates back thousands of years. The main incentive behind the adulteration is economic: either reduction of cost or increase in perceived value. Most adulterants are harmless, such as adulteration with products from non-authentic geographic origins. However, some adulterants are deadly. Paprika, as an example, can be adulterated with tomato skins and brick dust, but it can also be adulterated with lead oxide and carcinogenic chemical dyes, such as Sudan I dye. ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
Food adulteration is at the top of the list when it comes to food safety concerns, especially following recent incidents, such as the 2008 Chinese powdered milk scandal. That scandal involved milk and infant formula along with other food materials and components being adulterated with melamine. There were an estimated 300,000 victims in total, including six infant deaths, resulting from kidney stones and other kidney ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
According to the Organization for Economic Co-operation and Development, worldwide consumption of beef, poultry, and pork will exceed a combined 308 million tons in 2018. Additionally, Newsweek reports, "Over the last 50 years, the average amount of meat eaten per person globally has almost doubled, from around 50 pounds in 1961 to 94 pounds in ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Tobacco is one of the most widely used addictive substances in the world making it one of the largest industries across the globe. Tobacco can grow in any warm and moist environment which means it is farmed on all continents except Antarctica. The tobacco industry includes tobacco producers and farmers, tobacco manufacturers, wholesale distributors, and importers of tobacco ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
Near infrared spectroscopy has been widely used in the chemicals and polymers industries for years. This is because it is a rapid technique that eliminates sample preparation and costly consumables. FT-NIR analysis is non-destructive, capable of simultaneous analysis of multiple components, and can be used for online monitoring. With flexible sampling mechanisms, NIR can analyze solids, liquids, and ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
The pharmaceutical industry includes discovering, developing, producing, and marketing drugs to be used as medications and vaccines to treat and cure patients across the globe. The modern pharmaceutical industry began in the early 1800s and continues to grow rapidly until this day. For example, in 2018, cancer drugs made nearly 100 billion U.S. dollars of revenue ...
ByGalaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA)
Premium
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
After the petroleum refining process, it is important to assess the gasoline quality and to see if the fuel regulations are met. The ASTM D5769 describes a method to determine Benzene, Toluene and total aromatics in finished gasolines using a gas ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
The Matrix LIMS Nuclear Monitoring Solution is a versatile, comprehensive LIMS solution that is available for district survey, liquid discharge, gaseous discharge and chemistry applications. It is a highly configurable software system, suitable for environmental and chemistry applications within the nuclear power generation industry. It applies to both generating stations and during decommissioning. Access to the system is controlled by a comprehensive security system utilising a class based structure relating to ...
ByAutoscribe Informatics based in Reading, UNITED KINGDOM
Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Chlorodimethylether (CMME) and Bis Chloromethyl-ether (BCME) as well as Ethylene dichloride (EDC) and Methylene chloride (DCM) are well known as carcinogenic substances, like other chlorinated hydrocarbons. BCME is also very toxic. These particular chemicals are widely used in the world of chemical industry, especially in the production process for ion exchange resins. CMME in that case acts as a precursor for those resins while BCME is generated as an impurity which cannot be ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM