- Home
- Applications
- netherlands
- ventilation duct
Show results for
Refine by
Ventilation Duct Product Applications In Netherlands
12 applications found
Wood products are manufactured by bonding wood material (e.g., veneer, fibers, particles, and strands) or agricultural fiber, typically with resin under heat and pressure. A number of pollutants are emitted from wood product manufacturing processes – acetaldehyde, acrolein, formaldehyde, methanol, phenol, and propionaldehyde – and abatement and product recovery are ...
ByCECO Environmental based in Addison, TEXAS (USA)
In asphalt manufacturing, the product is typically processed from the heaviest part of petroleum. Emissions from oil refineries and asphalt manufacturers are tightly controlled using technologies that recover and re-use the particulates in the heating process. This reduces environmental emissions and also increases the efficiency of the heating ...
ByCECO Environmental based in Addison, TEXAS (USA)
The metal plating line is the part of the metal finishing process where metal is applied to a substrate. Metal plating involves many complex processes related to reducing contamination of the process bath; ensuring regular monitoring of bath chemistry; wetting agents; anodes; purified water; ventilation and exhaust systems; acid solution regeneration; and spent acid bath ...
ByCECO Environmental based in Addison, TEXAS (USA)
The chemical composition of gypsum is calcium sulfate dihydrate (CaSO4·2H2O). There are two types of gypsum: natural gypsum and Flue-Gas Desulfurization (FGD) gypsum. FGD gypsum is a by-product of desulfurization of flue gas from the stacks of fossil-fueled power plants, and the emissions captured from smoke stacks are purified into a hard substance and manufactured into gypsum. FGD gypsum has been used to manufacture gypsum board for more than 30 ...
ByCECO Environmental based in Addison, TEXAS (USA)
Paper manufacturing involves many chemical processes that drive the emission of nitrogen dioxide (NO2), sulfur dioxide (SO2), and carbon dioxide (CO2). Nitrogen dioxide and sulfur dioxide are major contributors of acid rain, whereas CO2 is a greenhouse gas responsible for climate change. In addition, wastewater discharge for pulp and paper mills often contains alcohols, chelating agents, and inorganic materials like chlorates and transition metal compounds. Furthermore, chlorine and compounds of chlorine are used ...
ByCECO Environmental based in Addison, TEXAS (USA)
Cement manufacturing has an impact on the environment at every stage of the manufacturing process. Airborne pollutants are released in the form of dust, gases, noise, and vibration when operating machinery and during blasting in quarries. Technologies to reduce dust emissions during the quarrying and manufacture of cement are widely used, as are technologies to trap and separate exhaust gases. ...
ByCECO Environmental based in Addison, TEXAS (USA)
The printing industry covers facilities engaged in newspaper publishing and printing, lithographic printing, gravure printing and commercial printing. Ink production companies manufacture inkjet cartridges and printing and inkjet inks, including lithographic, flexographic, gravure and letterpress inks. These products are sold to commercial printers, newspaper and magazine printers, office supplies wholesalers and screen printers. There is a need to address a wide range of emission control, air filtration and fluid ...
ByCECO Environmental based in Addison, TEXAS (USA)
Chemical product manufacturing involves the handling of acids, carcinogenic and toxic chemicals, along with the emission of fumes that contain volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and ...
ByCECO Environmental based in Addison, TEXAS (USA)
The furniture manufacturing industry includes facilities that manufacture household furniture; office furniture; mattresses, shades, and blinds; custom architectural woodwork and millwork; and institutional furniture. CECO offers a wide range of safe, clean and efficient systems and solutions designed to meet a variety of air emissions and pollution control challenges, including mist elimination; volatile organic compound (VOC) abatement; acid gas scrubbing; dry particulate filtration; and industrial dust, fume, ...
ByCECO Environmental based in Addison, TEXAS (USA)
The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems; ...
ByCECO Environmental based in Addison, TEXAS (USA)
The plastics and rubber products industry involves facilities that manufacture tires, rubber and plastic hosing, belts, gaskets and seals, rubber goods, plastic film and sheet, laminated plastic products and plastic pipe, bottles, foam products and assorted plastic products. CECO commonly deliver proven products and systems for a wide range of emission control, air filtration and fluid handling challenges, including VOC abatement; dry particulate filtration; industrial dust, fume, mist and air handling systems; ...
ByCECO Environmental based in Addison, TEXAS (USA)
Our ultraviolet light water treatment for swimming pools are proven to significantly improve swimming pool treatment and improve water quality by breaking down problem chloramines – the cause of eye and skin irritations – and protect against harmful chlorine-resistant microorganisms such as Cryptosporidium. For operators wanting bright sparkling water, fresh clean air and residual chlorine levels as low as 0.5ppm. The UV pool treatment of choice worldwide for swimming pools, spas and water ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM