- Home
- Applications
- netherlands
- water sampling
Refine by
Water Sampling Product Applications In Netherlands
39 applications found
Premium
ByGeneral Oceanics Inc. based in Miami, FLORIDA (USA)
Premium
INTRODUCTION: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of nitrites in water samples using the FLUORAT-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of beryllium in drinking water samples using the Fluorat-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of selenium in drinking water samples using the FLUORAT-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of arsenic in drinking water samples using the FLUORAT-02 ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Whether soil or water samples, Analytik Jena can offer you analysis solutions that are not only at the forefront of technology, but also simplify your everyday laboratory operations. ...
ByAnalytik Jena - an EndressHauser Company based in Jena, GERMANY
Premium
Introduction: The method allows determination of ammonium, lithium, sodium, potassium, magnesium, calcium, strontium and barium cations in samples of natural, potable, and waste water by the capillary electrophoresis ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: The method is used for the determination of the mass concentration of inorganic anions: chloride, nitrite, sulfate, nitrate, fluoride, phosphate in samples of drinking, natural, waste waters, and other aqueous matrices by capillary ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: The method allows determination of bromide and iodide ions in natural, potable (incl. bottled), and mineral water using capillary electrophoresis (CE) ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: In accordance with WHO’s Guidelines for Drinking Water Quality there is no health-based guideline value of zinc in water concentration. Concentration of zinc in tap water can increase as a result of its dissolution from pipes. Also, elevated levels of zinc may be an indicator of increased concentrations of other toxic metals; thereby zinc in water analysis is an essential analytical task. Lumex Instruments provides sensitive ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction: The method is designed to measure the concentration of elements in a variety of water samples, including natural water, tap water, drinking (incl. bottled) water, wastewater, mineral water, etc. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
At the same time increased levels of aluminium may lead to renal diseases and cause undesirable color and turbidity of distributed water. There are practicable levels of aluminium in water based on optimization of the coagulation process at drinking-water plants: 0.1 mg/L or less for large water-treatment facilities and 0.2 mg/L or less for small. Lumex Instruments provides accurate and selective fluorimetric method for the measurement of the mass ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: Anionic surfactants (A-SAS) represent, by volume, the most important group of surfactants used in cleaning products and the oldest and the largest volume anionic surfactant is soap. In concentrations 0.1 ~ 1.0 mg/L A-SAS become toxic for aquatic ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Being one of the key necessities of life, water should be submitted to a thorough quality control. Targeted chemical analysis of priority compounds can give an impression of the chemical quality, but may not cover the entire load of pollutants that evoke biological effects. CALUX assays are successfully applied in the identification of water samples that are polluted with biologically active toxicants even at low levels and address the complexity associated with ...
ByBioDetection Systems (BDS) b.v. based in Amsterdam, NETHERLANDS
Premium
Introduction: This analytical procedure is designed to measure the content of the elements (arsenic, barium, cadmium, cobalt, manganese, copper, iron, nickel, lead, strontium, and zinc) in seawater samples. Determination of the dissolved forms of the elements in samples with salinity up to 50‰ (including water from oceans and estuaries) is performed using MGA-1000 Graphite Furnace AA Spectrometer. ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Your cows drink from the drinking troughs. Therefore, the water must be clean in that place. Removing manure and feed residues is a good first step, but it does not work against the bacteria in the water. Have you ever taken water samples from the place where the animals drink? The drinking water is approved when it contains less than 10,000 bacteria per millilitre, but it doesn’t necessarily mean that it is clean then. ...
ByWatter B.V. based in Tynaarlo (Drenthe), NETHERLANDS
Premium
Introduction The indicator (tracer) method is used in hydrology for following, or tracing, the water flows for understanding the processes in hydrological systems. Oil companies often use the indicator (tracer) method for monitoring the exploitation of oil pools. Indicator (tracer) method gives essential information on the geological structure of the oilfield and the filtration flows in the ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction The method is used for the determination of the mass fraction of free choline (synthetic and natural) in feedstuffs by capillary electrophoresis. The method can be applied for all types of feedstuffs, compound feeds, fodders, premixes, fodder additives, and feed raw materials. The present method does not allow the determination of bound ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Premium
Introduction: The method is used for the determination of the mass fraction of all primary and secondary nutrients (macronutrients) in fertilizers by capillary electrophoresis. The method allows the determination of such macronutrients as ammonium nitrogen (ammoniacal nitrogen, NH4-N), nitrate nitrogen (NO3-N), phosphorus (P or P2O5), potassium (K or K2O) as well as sodium, magnesium, calcium, sulfur, chlorine (chloride), fluorine ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)