- Home
- netherlands
- Applications
Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Medical / Health Care
- Energy
- Waste and Recycling
- Environmental
- Air and Climate
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Mining
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Defense
- Glassware
- Metal
- Aerospace & Air Transport
- Packaging
- Plastics & Resins
- Health and Safety
- Commercial
- Electronics and Computers
- Maritime/Shipbuild/Water Transport
- Textile
- Paint
- Logistics
- Communications / Telecom / Datacom
- Government
- Forestry & Wood
- Retail
- Printing
- Banking & Finance / Insurance / Legal
- Real Estate
- Travel & Leisure
- Furniture
- Dry Cleaning
Xprt Product Applications In Netherlands
2,146 applications found
Environmental engineering’s agency Colsen b.v. designs, specifies and executes building site direction of several kinds of wastewater treatment installations for industrial- and communal wastewater. These installations are designed to deal with the local climatological conditions and specific customer ...
ByColsen International b.v. based in Hulst, NETHERLANDS
The ultra-fast analysis capabilities of IONICON PTR-TOF instruments are essential for eddy covariance flux measurements, allowing to study deposition and emission rates of biogenic volatile organic compounds (BVOCs). ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
PTR-MS for ultra-sensitive real-time monitoring of air pollutants. IONICON PTR-MS systems are well established tools in environmental research. Their fast response-times and ultra-low detection limits help researchers all over the planet to better understand the world we live in. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
Process monitoring in the petrochemical industry. Monitoring of syngas and other gas processes for safety, quality assurance and process optimization. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
Historically, landfills have been the most common method of organized waste disposal and remain so in many places around the world. Landfills are essential applications to ensure long service life and prevent soil pollution. In industrial basins, TenCate protection geotextiles guarantee the protection of the geomembrane against all risks of mechanical damages. A cost effective and environmental friendly solution to sort, treat and recycle ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS
Most sources of fugitive emissions are from multiple points rather than single point sources. So, open path area or perimeter monitoring provides more meaningful fugitive emissions data than an array of point sensors or a program of grab sampling. Point measurements may underestimate emissions because of missing locations with high gas concentrations, or conversely overestimate because they are located in areas of high concentrations. Grab sampling programs typically check only a small percentage of potential leak ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
AQUA Industrial Watertreatment is an experienced supplier of wastewater treatment systems for the poultry industry. Many AQUA systems have been installed worldwide at satisfied customers. The waste water produced during the processing of poultry is highly polluted with proteins, fats, carbohydrates, blood, feathers and meat particles. Extensive knowledge of the poultry slaughtering process is essential in the design of an adequate water treatment installation. The method used for the internal transportation of ...
ByMarel Water Treatment B.V. based in Boxmeer, NETHERLANDS
Total Organic Carbon (TOC) is found in all water supplies as naturally occurring organic matter. Over many years of experience, medium or low pressure UV treatment has become recognised as an effective process step in the breakdown and reduction of TOC in water intended for use in pharmaceutical, health care, power generation and micro-electronics applications. In the latter case, ultra-pure water is used to wash silicon wafers on which even small deposits of carbon compounds on the wafers can severely affect ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
ByQED Environmental Systems based in Dexter, MICHIGAN (USA)
Membrane technology has made major progress in recent years and is nowadays the method of choice for many processes in the chemical industry, wherever substances are to be separated efficiently and gently. A prime example of this is dia-filtration, in which solutes and particles with higher molecular weights are retained while solutes with lower molecular weights are "washed" out of the process fluid. ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in Wiesbaden, GERMANY
The new Weda YT-5000 with a five (5) meter wide suction nozzler speeds up the cleaning process considerably. Estimated cleaning speed is up to 3000 sq. meters/hour. The cleaner removes efficiently bottom sedimentation (sand, algae etc.) from the bottom surface and pumps it to a selected discharge point (filter, waste ...
ByWeda Robotics based in Södertälje, SWEDEN
Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental ...
BymicroLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS
Wastewater from industrial production is contaminated with various substances and as a result, effective wastewater treatment to the required limit values requires specialist knowledge. At the same time, wastewater treatment plants should be energy-efficient and conserve ...
ByEnviroChemie GmbH - part of the EnviroWater Group based in Rossdorf bei Darmstadt, GERMANY
If your job includes recycling contaminated hazardous material, a Vermeer T1255 Terrain Leveler SEM may offer a cost-efficient alternative to other remediation ...
ByVermeer based in Pella, IOWA (USA)
Protea has used our VOC gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, VOC abatement plants such as scrubbers and carbon-bed systems are typical installations where the use of Protea analysers and our VOC analysis expertise have proved valuable to plant operators. They prove a very powerful and flexible tool in both process gas measurements and VOC emissions monitoring. In the laboratory, Protea can deliver instruments with all the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM