- Home
- netherlands
- Applications
Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Agriculture
- Food and Beverage
- Medical / Health Care
- Energy
- Waste and Recycling
- Environmental
- Air and Climate
- Construction & Construction Materials
- Chemical & Pharmaceuticals
- Mining
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Defense
- Glassware
- Metal
- Aerospace & Air Transport
- Plastics & Resins
- Packaging
- Health and Safety
- Electronics and Computers
- Maritime/Shipbuild/Water Transport
- Textile
- Commercial
- Paint
- Logistics
- Communications / Telecom / Datacom
- Government
- Forestry & Wood
- Printing
- Retail
- Banking & Finance / Insurance / Legal
- Real Estate
- Travel & Leisure
- Dry Cleaning
- Furniture
Xprt Product Applications In Netherlands
2,137 applications found
As the world addresses the challenges of global warming green energy production and in particular wind energy generation has increased significantly. Biral can provide sensors for the control of aviation obstacle light intensity, wind speed measurement and site assessment. The Deutscher Wetterdienst (German Meteorological Service – DWD) has certified the VPF-710, SWS-100 and SWS-200 sensors as suitable for use in visibility controlled wind turbine obstruction light ...
ByBristol Industrial & Research Associates Ltd (Biral) based in  Portishead, UNITED KINGDOM
Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog. ...
ByCECO Environmental based in  Addison, TEXAS (USA)
Carbon fibre is a unique material and is found in many high-tech industries such as sports car manufacture, wind turbine blade construction and sports equipment. The production of carbon fibre from acrylic fibre involves the baking of the fibre in ovens, which gives emissions of gas species including Hydrogen Cyanide (HCN). Protea’s range of gas analysers can provide a solution for the periodic or continuous measurement of gases from carbon fibre production in order to give reportable emissions values as ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Create more efficient power ...
ByMunters Corp based in  Amesbury, MASSACHUSETTS (USA)
At API Schmidt-Bretten, we know the key to successful power generation is efficiency. That’s why we provide a broad range of custom and standard heat transfer solutions for both renewable and nonrenewable energy applications that can help you minimize downtime and get the most out of your production ...
ByAPI Schmidt-Bretten GmbH & Co. KG based in  Bretten, GERMANY
Offshore wind turbine foundations are engineered with a variety of designs. The four most common designs are monopiles, jacket, tripod and gravity foundations but the majority of US offshore wind resources are in deep waters and utilize spar-buoy, semi-submersible, and tension leg platform designs. The foundation used and the suitable size depends on external factors such as water depth, wind speed, height of waves and the seabed ...
ByMobiltex Data Ltd. based in  Calgary, ALBERTA (CANADA)
The highest standards of accuracy and reliability are required in laboratories and medical devices. STS products are perfectly suited to this purpose – an example is their use in pressure and measurements of dialysis ...
BySTS Sensor Technik Sirnach AG based in  Sirnach, SWITZERLAND
After an EVAR or PEVAR procedure, you will be given pain medication if needed and will be able to gradually get out of bed, walk, and eat solid foods. You may feel well enough to resume your normal activities in 4 to 6 weeks. Endovascular repair means you will need regular follow up visits with your doctor: a month afterward, at six months, and each year following your procedure. The visits will include a physical exam and an ultrasound, CT scan, or angiography to check for any ...
ByEndologix LLC based in  Irvine, CALIFORNIA (USA)
The Aireas metrology network in and around Eindhoven, the Netherlands has been operational since 2013. The network is consisting of 30 stations, 6 of which are equipped with the stationary NanoMonitor (successor device of the NanoTracer RM). The Network is used to drive public awareness of the impact of environmental parameters. Actual values are available via a life map open to the public, and awareness is further driven by social media activities (eg YouTube). See website (in Dutch): www. ...
ByOxility BV based in  Breda, NETHERLANDS
Queensland University has been using NanoTracers for studies on personal exposure measurement. Significant studies have been carried out on school traffic using both long-term reference studies and mobile NanoTracers that were carried by children on there daily school traffic routes. See: http://eprints.qut.edu.au/65099/1/MAZAHERI_School_children%E2%80%99s_personal_exposure_EST.pdf for more ...
ByOxility BV based in  Breda, NETHERLANDS
Exposure to UFP due to air traffic has a growing attention. In the Netherlands several studies have been carried out on the largest airport, Schiphol. For mobile measurements NanoTracers were used in combination with more stationary equipment (eg SMPS). For the full report (in Dutch) see: ...
ByOxility BV based in  Breda, NETHERLANDS
To determine the exposure to UFP of airport employees in 30 members of Kopenhagen Airport ground crew were followed during 8 days with NanoTracer personal exposure sensors. The setup of this study (performed by the Section of Environmental Health, Department of Public Health, University of Copenhagen), as well as first conclusions can be found here : ...
ByOxility BV based in  Breda, NETHERLANDS
UFP exposure in urban areas may be dependent on the selected mode of operation. In this study (carried out by Institute of Environmental Assessment and Water Research Barcelona Spain and DICeM�University of Cassino and Southern Lazio, Cassino Italy) 78 trips with walking, bus, tram and subway have been assessed. The particle concentration proved to be lowest in subway travel, and highest while travelling in diesel bus. City centre traffic crossings show particle transient peaks above ...
ByOxility BV based in  Breda, NETHERLANDS
Various industrial processes create exposure to Ultra fine particles. In case of engineered nanomaterials this is explicit. However, some processes create high exposure rates without EMN being involved. In this study, carried out by ArboNet (Dutch EHS organisation) in cooperation with software partner PIMEX the production of LCD screens with coatings based on nano-size particles was investigated. NanoTracers were used for personal mobile measurement as well as background sensing. Reference sensor was a SMPS. It ...
ByOxility BV based in  Breda, NETHERLANDS
Traditionally exposure assessment studies in developing countries have been bases on fixed-site monitoring. This study followed school children in three sites and quatified daily personal exposure to UFP with real time monitoring NanoTracer devices. Diaries were kept to correlate exposure levels to activity and the relevant micro-environment. The highest UFP exposures resulted from cooking and eating (64% of daily exposure, due to cooking on traditional wood-fired mud cookstoves). The lowest UFP exposures were ...
ByOxility BV based in  Breda, NETHERLANDS
To assess exposure at an industrial workplace UFP measurements were carried out. As part of a four-step approach starting with a paper risk-study in the second step NanoTracers were used to assess exposure from manufacturing processes vs. the local background levels. Using the mobile device specific spots in the manufacturing site could be identified that could be improved to reduce the exposure levels. As a next (third) step specific positions were identified to execute multi-day sampling of materials, to further ...
ByOxility BV based in  Breda, NETHERLANDS
Water is used at some point in almost every manufacturing process worldwide. In many industrial applications, the use of chemicals such as chlorine or biocides is restricted for process reasons. UV provides a highly effective, chemical-free disinfection solution for a vast range of industrial applications. Our flexible industrial water treatment solutions suit the needs of a vast number of manufacturing ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
Always effective and safe disinfection at your fingertips. Dependence on suppliers, sharply increasing costs and harmfulness of chemicals are major obstacles to good hygiene in healthcare. Watter has been the expert in sustainable disinfection for more than ten years. We are the only one in the Netherlands to offer a structural solution that makes you self-sufficient. Say goodbye to third parties and let us inform you about the benefits for you. ...
ByWatter B.V. based in  Tynaarlo (Drenthe), NETHERLANDS
The purpose of de-chlorination is the removal of free chlorine and combined chlorine compounds from potable water, as supplied by municipal water supplies. Chlorine will oxidize the surface of thin film composite polyamide membranes, causing the membrane to lose its ability to repel or reject salts. As a result, the membranes used in Reverse Osmosis (RO) or Electro-deionisation (EDI) systems will exhibit shorter lifetimes when exposed to chlorine in the water they are treating and membrane manufacturers will ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in  Wigan, UNITED KINGDOM
For a good company result, the quality of your crops is of the utmost importance. Increasing brightness, weight and production per square meter. You do everything in your power to improve continuously. On the other hand, saving costs is a contribution to your company result as well. The influence of the water treatment system is significant in this matter. Increasing water quality against lower costs is desirable. We can be of service by creating the best possible chlorine based disinfection. Due to the utmost ...
ByVDH Water Technology based in  Scherpenzeel (Gld.), NETHERLANDS