Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Mining
- Energy
- Oil, Gas & Refineries
- Environmental
- Food and Beverage
- Agriculture
- Construction & Construction Materials
- Pulp & Paper
- Chemical & Pharmaceuticals
- Soil and Groundwater
- Electronics and Computers
- Medical / Health Care
- Metal
- Automobile & Ground Transport
- University / Academia / Research
- Plastics & Resins
- Aerospace & Air Transport
- Glassware
- Paint
- Waste and Recycling
- Defense
- Forestry & Wood
- Textile
- Health and Safety
- Commercial
- Leather & Tanning
- Printing
- Travel & Leisure
- Packaging
Xprt Product Applications In Peru
822 applications found
Surface water monitoring as an application covers many different environments and can require different equipment depending on the monitoring requirements. Possible environments include lakes, rivers and coastal waters where the monitoring may be focused on water quality or water level measurement. Aquaread offer instruments suitable for each of these environments and have a wide range of possibilities depending on the kind of data you wish to ...
ByAquaread Ltd, Part of the NKE Group based in  Broadstairs, UNITED KINGDOM
Accurate ink dosing pumps in printing and packaging; Verderflex peristaltic pumps offer optimum performance to the printing and packaging industries. Combining the ability to self-prime, run dry and an ultra-fast tube changeover these pumps keep downtime to an absolute minimum. Additionally, the combination of the simple tube clamping mechanism and the low tube cost generates savings in by eliminating specialist tools and labour and by costly cleaning ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
The automatic and precise dosing of ink and sealant, 24 hours a day every day, is the role of a Verderflex's dosing tube pump, the Vantage ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
The most important ions which naturally occur in plant tissues are sodium, potassium, calcium, magnesium, nitrate, sulphate and phosphate. A sample of 5 g of oven-dried plant material contains on average, 25 mg calcium, 9 mg magnesium, 80 mg potassium and 3 mg sodium. The recommended method for the measurement of calcium is to precipitate the calcium as an oxalate, the precipitate is then dissolved and measurement taken from the resulting solution. Sodium and potassium may be measured directly following an ashing ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
The calcium content of aqueous solutions of deoxyribonucleic acid (DNA) and deoxyribonucleoprotein (DNP) cannot assayed directly because of interference effects. An acid extraction procedure enabled direct measurements of calcium in DNA and DNP, or a standard addition technique was used at higher ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Refused-derived fuel (RDF) is a form of municipal solid waste (MSW) that has been treated in order to burn more efficiently. Solid recovered fuel (SRF) is waste derived fuel that meet a higher quality specification than ...
ByPresona AB based in  Tomelilla, SWEDEN
Back in the 1980’s civil engineers were among the first to adapt Operational Modal Analysis (OMA) for testing of large structures. The size of the civil engineering structures and the fact that ambient excitation typically is uncontrollable pushed the development of OMA techniques heavily in this area. Today OMA is a wide spread technology used in many engineering field but testing of civil engineering structures is still the most popular OMA application. Back in 1999, ARTeMIS software was originally ...
ByStructural Vibration Solutions A/S based in  Aalborg East, DENMARK
Carbolite Gero offers enhanced furnaces and ovens for the increasing demands of materials science departments in universities and research institutes. Accurate temperature control, combined with secure data-logging, is often an essential requirement of research work in academia, industry and pharmaceutical markets. Carbolite Gero’s complete range of ovens, chamber and tube furnaces are available with secure data-logging with remote connectivity over Ethernet or other industry standard communication ...
ByCarbolite A Verder Company based in  Hope, UNITED KINGDOM
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Scrap metal identification and sorting are some of the most important tasks in recycling. The analysis might take days if not months, depending on the pile. But if you have a handheld XRF for scrap metal sorting, speed and efficiency are ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Many factors are involved in moving or trading bulk volumes of liquid petroleum and other products. The value of the product is usually determined by an independent inspection company who uses their own equipment to calculate the volume, purity and other required specifications. These inspection companies are responsible for providing the most accurate information possible from circumstances which are highly variable. ...
ByThermoProbe Inc. based in  Pearl, MISSISSIPPI (USA)
Custody Transfer in the oil and gas industry refers to the transactions involving transporting a product from one operator to another. The custody transfer may occur at a transfer from marine vessel to a tank, a tank to tank, tank to railcar or truck, pipeline to tank, etc. But if liquid or gas fluids are transferred via pipeline the transaction is usually measured with some type of flowmeter system. The flowmeter location is where the fluid is being measured for change of ownership and therefore the custody ...
ByThermoProbe Inc. based in  Pearl, MISSISSIPPI (USA)
Hospitals, healthcare centers and clinics require specialized treatments for their discharges, due to the potentially dangerous nature of their effluent. As a result, hospitals’ wastewater treatment constitutes a higher priority than that of the average household consumption. ...
BySalher based in  Madrid, SPAIN
Large quantities of water are used in many parts of a touristic resort: kitchens, heating and air conditioning, toilet tanks, swimming pools, flushing water, gardens and laundry. ...
BySalher based in  Madrid, SPAIN
Offshore wind turbine foundations are engineered with a variety of designs. The four most common designs are monopiles, jacket, tripod and gravity foundations but the majority of US offshore wind resources are in deep waters and utilize spar-buoy, semi-submersible, and tension leg platform designs. The foundation used and the suitable size depends on external factors such as water depth, wind speed, height of waves and the seabed ...
ByMobiltex Data Ltd. based in  Calgary, ALBERTA (CANADA)
Workplace noise monitoring for occupational noise is one of the most overlooked risks in the workplace. Ignoring this hazard can result in fines or prosecution from organisations like the HSE in the ...
ByCirrus Research plc based in  Hunmanby, UNITED KINGDOM
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Analyzing gold is extremely necessary and relevant today since the products must correspond to the declared quality. The ability to quickly and accurately analyze gold is essential for narrow-profile specialists. For example, in the field of science, research, laboratories, and enterprises. Suppose you’re working in the jewelry industry, with precious metals traders, or you are a jewelry store owner. In that case, gold testing machines for you will be extremely useful and so ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
With integrated high-performance ultrasonic technology of the latest generation, the BIOSONATOR is an efficient and compact complete system for digesting biomass on biogas plants - even with difficult substrates. In order to now offer operators an even more practical and, above all, optimized solution, ULTRAWAVES, in cooperation with its colleagues from SONOTRONIC, has further developed the ultrasonic system into a plug & play system. ULTRAWAVES guarantees at least 10 % increased economic benefit and ...
ByUltrawaves Wasser & Umwelttechnologien GmbH based in  Hamburg, GERMANY
...
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)