Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Monitoring and Testing
- Agriculture
- Food and Beverage
- Construction & Construction Materials
- Energy
- Air and Climate
- Waste and Recycling
- Environmental
- Medical / Health Care
- Oil, Gas & Refineries
- Mining
- Chemical & Pharmaceuticals
- Metal
- Pulp & Paper
- Soil and Groundwater
- Automobile & Ground Transport
- Electronics and Computers
- University / Academia / Research
- Glassware
- Aerospace & Air Transport
- Maritime/Shipbuild/Water Transport
- Defense
- Paint
- Communications / Telecom / Datacom
- Forestry & Wood
- Plastics & Resins
- Travel & Leisure
- Packaging
- Commercial
- Printing
- Textile
- Health and Safety
- Banking & Finance / Insurance / Legal
- Retail
- Logistics
- Government
- Dry Cleaning
- Household Appliances
- Leather & Tanning
Xprt Product Applications In Poland
1,476 applications found
EyeCSite 2.0 is the industry-leading quantification software, offering a wide range of functionalities that detects, alerts and quantifies emissions in a very simplified and user-friendly interface, without the need for a close contact analyzer. ...
ByOPGAL based in Karmiel, ISRAEL
The automotive industry is a major air pollution contributor and thus one of the most regulated industries in the world. Several gas monitoring techniques are widely used in the automotive industry for measuring vehicle emissions. Typical applications include live on-board exhaust monitoring (CO, CO2, N2O, NOx, formaldehyde, acetaldehyde, oxygen and moisture), analysis of raw and dilute exhaust gas from the engine and tailpipe with gas-bags (CO2, N2O, NOx, CH4, EtOH, THC, H2S, SO2, NH3, formaldehyde and ...
ByGasera Ltd based in Turku, FINLAND
Each year millions of containers arrive in ports around the globe. Typical international cargo has to travel for a long time in varying temperature and humidity conditions. Even though it may be inspected and considered to be safe prior to leaving its destination, hazardous chemicals and fumigants can off-gas during the transit. The combination of sealed containers and long journey times means that chemicals can build to a level that would never normally be encountered in domestic or industrial settings. In the ...
ByGasera Ltd based in Turku, FINLAND
The use of SCR technology and DPF technology in the maritime industry allows the reduction of toxic substances into the atmosphere. SCR systems also meet the new regulations of the International Maritime Organization IMO, which introduced the Tier III standard for special zones (ECA) such as the Baltic Sea, the Mediterranean Sea and the coast of the United States where all ships built after january 1st 2016th need to reduce nitrogen oxides (NOx). ...
ByEcoexhaust Sp. z o.o. based in Warsaw, POLAND
TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries. In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%. The dewatering containers can be custom-sized to the application, placed in available space between other ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS
Reuse, is using the water again in a process for a different ...
BySistema AZUD, S.A. based in Alcantarilla, SPAIN
Industry challenge: In metal manufacturing and metal processing a wide variety of processes, e.g. metal cutting, surface processing and forming, are required to achieve a high-quality product. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are emulsions (coolants and lubricants), separating agents (from aluminum die casting, autoclaving), cleaning waters, rinsing and ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Industry Challenge: The waste disposal, recycling and remediation industries produce a great variety of wastewaters. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are process waters from metal recovery, metal recycling, and waste minimisation! Our evaporator technology effectively cleans process wastewaters and produces up to 98% re-usable high-quality distillate. You ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
We develop efficient solutions to meet the particular wastewater treatment needs of small towns, up to 2.000 population equivalent (PE), and medium-sized towns, up to 4.000 PE. ...
BySalher based in Madrid, SPAIN
The EPR regulations have replaced the IPPC regulations and are effective from May 2009 for qualifying companies within the industrial sector and October 2009 within the water sector. They will progressively require industry to minimise waste, reduce product loss and implement improved process control. The legislation will require the operator to self monitor processes and discharges, to demonstrate effective control with particular emphasis on EPR compliance and prevention. The regulating Agency will operate a ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Intake protection systems have been extensively installed to protect water treatment works, from ingress of polluted water and waste-water plants from toxic chemical loads. A suitable system typically comprises a suit of instrumentation, measuring key chemical, physical and indicator parameters dependant upon the identified risks, associated with the individual site activity or discharges from neighbouring ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Sometimes an 'off the shelf' water quality monitoring product is just not available and it is necessary to engineer a complete bespoke monitoring solution. System integration demands a diverse range of abilities. PPM is experienced in designing the correct suite of instrumentation combining manufactured, distributed and factored ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
A wide range of sample acquisition and filtration systems are available to prepare even the most difficult of samples for reliable on-line analyser measurement. The correct choice is often critical to prevent analyser blockage and optimise performance. Cross Flow Filtration The PPM cross flow filter, is a simple in-line device used to protect an analyser from ingress of solids, for applications where sample quality is generally good but occasionally suspended solids may be present. The stainless steel filter ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in Hannover, GERMANY
In desalination plants it is of great importance for the operation of the entire plant that the pre-treatment of the water is good before the salt is to be removed. For reverse osmosis (RO) desalination plants a good pre-treatment is essential for avoiding membrane fouling, resulting in reduced water production and increased operational ...
ByFiltralite - Leca Norge ASFiltralite based in Rælingen, NORWAY
Filter beds with pre-filter are simple, efficient and environmentally friendly ways of treating domestic wastewater from detached houses and holiday homes. The requirements related to operation and maintenance are few in relation to traditional compact plants. These systems can also be adapted to suit clusters of houses, schools, kindergartens, small companies ...
ByFiltralite - Leca Norge ASFiltralite based in Rælingen, NORWAY
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM