- Home
- Applications
- poland
- wastewater processing
Refine by
Wastewater Processing Product Applications In Poland
21 applications found
When the wastewater from a process cannot be disposed of to the sewerage line or through normal channels because the solids content of the waste water is higher than allowed by the local authorities, the installation of an AZUD filtration system can reduce the solids level, allowing an acceptable quality of waste water to be disposed of. ...
BySistema AZUD, S.A. based in Alcantarilla, SPAIN
TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries. In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%. The dewatering containers can be custom-sized to the application, placed in available space between other ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS
Premium
To protect our natural waters and to support drinking water production, all wastewater is therefore first cleansed of containments and pollutants before it is returned to the water cycle. To treat the water and to achieve the best possible, natural water quality, different processes are used. Generally, the treatment of wastewater can be divided into two basic types . ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Industry Challenge: The waste disposal, recycling and remediation industries produce a great variety of wastewaters. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are process waters from metal recovery, metal recycling, and waste minimisation! Our evaporator technology effectively ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Premium
Biological treatment in the aeration tank is not only the key stage in prevalent wastewater treatment processes, it is also the most energy-intensive. If operators want to improve the energetic balance of their wastewater treatment plant, optimising the aeration in the aeration tanks gives them a large amount of design leeway. ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Premium
The economic efficiency of modern wastewater treatment plants is significantly influenced by the energy consumption of the various process steps during wastewater treatment. The energy-intensive process of biological aeration is a particular focus of attention in this regard: around 60 to 80 percent of the total energy requirement is generated here. At the same time, wastewater tank aeration offers great energy-saving potential ...
ByAerzener Maschinenfabrik GmbH based in Aerzen, GERMANY
Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. ...
ByFlottweg SE based in Vilsbiburg, GERMANY
Premium
In the beverage industry, large quantities of filtrate water and pure water are used to prepare and cool products as well as clean containers. Kurita Water Industries offers a range of products, such as filtration systems using membranes and deionizers, which combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers. Kurita Water Industries also offers a number of wastewater treatment systems, including biochemical treatment systems that ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Industry challenge: Be it die casting or electroplating - the automotive and aerospace industries generate large amounts of wastewater in various production processes that can contain a wide range of ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Industry challenge: In metal manufacturing and metal processing a wide variety of processes, e.g. metal cutting, surface processing and forming, are required to achieve a high-quality product. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
In many applications, in the production of individual components as well as in energy generation itself, water is an instrumental ingredient. In silicon processing, wastewater can contain a wide variety of substances such as acids, PEGs or fluorides. Energy production from biomass creates wastewater containing solids and organic compounds. Due to strict regulations, these types of wastewater must not be led into sewage without a prior ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Premium
Kurita Water Industries also offers a number of wastewater treatment systems and wastewater reclamation systems that provide an optimal means for treating the organic and inorganic wastewater discharged during the various production ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Premium
Innovative solutions to prevent corrosion, deposits and microbiology. An optimal heat transfer is the most important point in every water-cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops customised solutions for cooling and process water systems, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and ...
ByKurita Water Industries Ltd based in Tokyo, JAPAN
Wastewater from industrial production is contaminated with various substances and as a result, effective wastewater treatment to the required limit values requires specialist knowledge. At the same time, wastewater treatment plants should be energy-efficient and conserve ...
ByEnviroChemie GmbH - part of the EnviroWater Group based in Rossdorf bei Darmstadt, GERMANY
Industry challenge. Surface technology optimises parts and tools to meet specific requirements. Processes used in surface technology: Chemical pre-treatment of surfaces, e.g. cleaning, degreasing, etching. Mechanical surface treatment, e.g. grinding, polishing. Surface coating, e.g. painting, powder coating. Water is an essential ingredient in many of these processes, for example in pre-treatment. As a consequence, water can contain a wide variety of substances after completion of the respective ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing ...
ByFlottweg SE based in Vilsbiburg, GERMANY
Ressources like water and air play an important role in chemical product manufacturing and purification processes. As a result, a vast variety of wastewater is generated, containing all kinds of residues from cleaning processes, pharmaceutical products, aqueous chemicals or dyestuffs. Legal requirements for the disposal of those types of wastewater are extremely rigid. This is a reason why these industries rather treat their ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
The inserts made of the Pro-SLOT® wedge wire screens are perfect for solid and liquid filtering and separation processes in, among others, processing water and industrial wastewater treatment, water treatment, and sugar and starch production. ...
ByProgress Eco S.A. based in Tuczepy, POLAND
The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in Wiesbaden, GERMANY
The sizing and frequency of cartridge / bag replacement, in cartridge / bag filters used as pre-filters in fine filtration applications depends directly on the amount of suspended solids in the water. ...
BySistema AZUD, S.A. based in Alcantarilla, SPAIN