Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Air and Climate
- Food and Beverage
- Medical / Health Care
- Agriculture
- Oil, Gas & Refineries
- Chemical & Pharmaceuticals
- Glassware
- Energy
- Mining
- Construction & Construction Materials
- Metal
- Environmental
- Pulp & Paper
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- Waste and Recycling
- University / Academia / Research
- Automobile & Ground Transport
- Paint
- Plastics & Resins
- Defense
- Communications / Telecom / Datacom
- Forestry & Wood
- Travel & Leisure
- Health and Safety
- Real Estate
- Maritime/Shipbuild/Water Transport
- Government
- Commercial
- Printing
- Textile
- Retail
Xprt Product Applications In Romania
1,159 applications found
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The accurate measurement of a gas mixture is essential to metal and mineral processing. Reliable measurements are needed to manage processes ranging from effective combustion control to optimized process ...
ByServomex - a Spectris Company based in Sugar Land, TEXAS (USA)
The pharmaceutical industry poses many chemical hazards which can be detected using our PID technology. Our range of personal, portable of fixed VOC detectors will give an unrivalled solution when you want to detect a mixture of uncommon hydrocarbons. Use our tried and tested VOC detectors if you want to measure VOC concentration in a production facility or storage ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Our leading PID gas sensors are recognised around the world by original equipment manufacturers for their longevity and critically their resistance to ...
ByION Science Ltd. based in Royston, UNITED KINGDOM
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Bread contributes about one-sixth of daily salt intake and is used to improve flavour and texture. The amount of sodium in bread can differ significantly, depending upon brand and type of grain used, ranging from 592mg/100g to 748mg/100g. The level of sodium in bread is primarily due to the amount of salt added to the dough during manufacture. The amount of potassium is determined by the type of flour and the washing and bleaching operations during cereal processing. Bread does not make a significant contribution ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Sodium chloride is an essential ingredient of all processed foods; it is needed to enhance flavour and increase shelf life. In many processed foods, additional sodium is added as a flavour enhancer; potassium and calcium are also naturally present but not normally used as processing ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
HORIBA’s highly accurate Nitrous Oxide (N2O) analyzers represented in various types from stationary to portable, contribute to the environment protection and GHG emissions mitigation by quantification of N2O emission from wastewater treatment ...
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
ETG Risorse e Tecnologia has transferred its knowledge in gas analysis to fire and explosion prevention. There is a high case history of accidents occurring in storage depots or silos containing potentially flammable material. Deposits such as coal or wood - but also grains - easily create dust that generates an environment easily subject to combustion when stationed in the air. ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
The importance of cleanrooms in the electronic industry. Air purity is essential for efficient production. The laboratories where technicians produce the components installed in smartphones, computers, and all electronic devices are subject to a high environmental control level. Any particles in suspension - commonly called dust - could cause irreparable damage to chips and microprocessors, becoming waste material. To maintain a high-efficiency rate, manufacturers have equipped themselves with clear rooms where ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
At Weda we design, build and sell pool cleaners for swimming pools and commercial swimming facilities with high demands on performance and reliability. Maintaining good water quality requires both effective water cleaning processes and effective underwater surface cleaning. Furthermore, effective surface cleaning means the amount of chlorine added to the water can be reduced. This contributes to a better environment for both employees and visitors. One of many advantages being a lower risk for allergic ...
ByWeda Robotics based in Södertälje, SWEDEN
Weda has been developing and marketing robots for underwater cleaning since the 1970s. The robots are based on strong and efficient pumps in combination with brush systems that release the sediment from the bottom and walls. Weda AB stands for environmental friendliness and sustainability. We are at the forefront of our underwater cleaning solutions and our robots are world class. There are many different types of water reservoirs that need regular cleaning, preferrably without adding environmentally hazardous ...
ByWeda Robotics based in Södertälje, SWEDEN
Solar heating systems are integrated with the existing conventional heating system in the building with the use of a collectors’ ...
ByChromagen Ltd based in , ISRAEL
Airports, small and large, use noise and operations monitoring systems to reduce the noise of flight operations in the surrounding community. Noise monitoring is generally used to evaluate noise abatement programs and to develop aircraft departure and arrival procedures that minimize the impact of aircraft noise based upon altitude, flight path, and time of day. Noise monitoring is linked with radar tracking so that specific aircraft can be identified when noise limits are exceeded and so operational ...
ByLarson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA)
ByAereon, part of Cimarron group based in Legnano (MI), ITALY
ByAereon, part of Cimarron group based in Legnano (MI), ITALY