Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Air and Climate
- Energy
- Food and Beverage
- Chemical & Pharmaceuticals
- Agriculture
- Environmental
- Mining
- Metal
- Construction & Construction Materials
- Pulp & Paper
- Automobile & Ground Transport
- Glassware
- Medical / Health Care
- Waste and Recycling
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- University / Academia / Research
- Plastics & Resins
- Defense
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Paint
- Communications / Telecom / Datacom
- Textile
- Health and Safety
- Commercial
- Printing
- Government
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Leather & Tanning
- Retail
Xprt Product Applications In Russia
1,224 applications found
Premium
Thermal treatment (e.g., annealing, tempering) of materials. Heat treating metals to enhance their metallurgical qualities necessitates high accuracy temperature measurement and control. In many of these processes contact temperature devices cannot be used. AMETEK Land provides accurate Non-contact solutions tailored to these ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Cement manufacturing (kiln processes) production. Cement is manufactured through a closely-controlled chemical combination of calcium, silicon, aluminium, iron and other ingredients. Temperature monitoring at key stages is essential to providing this close ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Monitoring of fugitive emissions from industrial facilities. Most of the OPSIS gas analysis systems are based on monitoring methods with open measurement paths. This provides a perfect tool for monitoring the air quality and detecting any gas leaks from industrial facilities so that staff and nearby residents can be alerted and measures can be taken ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Port environments can be particularly exposed to air pollution, both in gaseous form and as particles. The ships are an obvious source, but both activities related to the unloading and loading of goods and land traffic to and from the ports can also contribute. Monitoring the concentration of air pollutants can be done both in order to monitor the environment in general and to map the sources. In the case of emissions from ships, it may be of particular interest to monitor sulfur dioxide (SO2) levels near the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Process monitoring and monitoring of emissions from aluminium smelters can be a challenge due to high concentrations of for example hydrogen fluoride (HF) and dust. The use of sampling systems in such environments requires a lot of maintenance and is therefore costly. Such systems can also be unreliable. OPSIS offers better ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Demanding monitoring environment at cement industries. Process control and emissions monitoring at a cement plant can be a challenge due to high dust levels and corrosive gases. OPSIS offers gas analysis systems that can handle these environments and that have high accuracy, short response times, and long maintenance ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. The use of extractive systems in such environments requires a lot of ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. Use of extractive monitoring systems in such an environment requires a lot of maintenance and the instruments are prone to malfunction. However, unlike extractive systems, OPSIS non-contact monitoring technology has no problem handling these ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
ByENVEA based in Poissy, FRANCE
Premium
ENVEA’s extensive range of ambient, emission and process monitoring systems are particularly suitable for use in the often harsh, high temperature and dusty environments found in the Metals Industry. A wide range of measurement technologies are available for monitoring process parameters such as the moisture content of fuels (coal), blast furnace efficiency, the continuous monitoring of sinter dust transfer and silo level indication. In addition, instruments to monitor and identify potential faults in dust ...
ByENVEA based in Poissy, FRANCE
Premium
Reducing air pollution is a major challenge worldwide. ENVEA’s pioneering technologies help private, public and local authorities meet their air quality challenges and objectives. Over the decades, our engineers have been innovating, inventing, and modernizing tomorrow’s AQMS solutions to be in line with environmental standards and climate change challenges. Whether it’s for a single monitoring location, or a city or nation-sized air pollution monitoring network of reference multiparameter ...
ByENVEA based in Poissy, FRANCE
Premium
Our mercury monitors are designed for fully automatic determination of mercury traces in liquids and sample digests, an alternative solution to complex and time consuming manual techniques, also increasing the precision, efficiency and productivity of your lab. Some of our “ambient” monitors can also be used in laboratory, R&D applications or medical gas purity analysis and monitoring. For instance, number of O342e monitors are used worldwide by various rubber manufacturing companies in Ozone ...
ByENVEA based in Poissy, FRANCE