Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Air and Climate
- Energy
- Food and Beverage
- Chemical & Pharmaceuticals
- Agriculture
- Environmental
- Mining
- Metal
- Construction & Construction Materials
- Pulp & Paper
- Automobile & Ground Transport
- Glassware
- Medical / Health Care
- Waste and Recycling
- Aerospace & Air Transport
- Electronics and Computers
- Soil and Groundwater
- University / Academia / Research
- Plastics & Resins
- Defense
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Commercial
- Paint
- Communications / Telecom / Datacom
- Textile
- Health and Safety
- Printing
- Government
- Travel & Leisure
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Retail
- Leather & Tanning
Xprt Product Applications In Russia
1,224 applications found
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Sodium chloride is an essential ingredient of all processed foods; it is needed to enhance flavour and increase shelf life. In many processed foods, additional sodium is added as a flavour enhancer; potassium and calcium are also naturally present but not normally used as processing ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Preparation of Glassware: Thoroughly clean and rinse all glassware with the supplied BWB Technologies deionised distilled water to ensure that it is clean and free of extractable sodium and potassium. Glassware should be acid cleaned and rinsed thoroughly in deionised double distilled water prior to use to avoid contamination from extractable metals under ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This procedure uses a TCA (trichloroacetic acid) extraction of the tissue to release all of the ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Introduction: Hydrazine is an inorganic compound consisting of just Hydrogen and Nitrogen. It is a clear and oily liquid with a high vapor pressure. Hydrazine is very reactive and very toxic, even at low ppb- levels already. It is carcinogenic, irritant at mucous membranes and damages lungs, the nervous system, kidneys and the liver. Hydrazine is used for various technical and chemical purposes such as a corrosion inhibitor in tubes and containers, in chemical production processes as reducing agent or Hydrogen ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Phosgene is the common name for Carbonic Dichloride, a gaseous compound. It is very toxic at ppb- concentrations already. Phosgene is a very important precursor in the chemical industry for the production of e.g. polyurethanes, pharmaceutics colors, etc. and therefore widely used. Even though it is handled in hermetic closed systems only, several generators for Phosgene are in operation worldwide to at least avoid all risks caused by transportation also. The effects of intoxication can occur hours or ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: TCP (1,2,3- Trichloropropane) and DCP (2,3- Dichloropene) are liquid compounds from the group of Chlorinated Hydrocarbons, defined as carcinogenic and mutagenic at low concentrations already. Due to the pretty high vapor pressure of these liquids, a significant health- risk is created by handling. TCP and DCP are widely used as chemical precursors in production processes for the synthesis of various products, such as chlorinated solvents and Agrochemicals. Furthermore DCP is also used as a ...
ByIUT Technologies GmbH based in Berlin, GERMANY
In the context of water shortage and the implementation of ever higher safety standards, Salher has created solutions that save resources and energy. ...
BySalher based in Madrid, SPAIN
Energy and Chemistry are interrelated with Water. To generate fuel and electricity, through extraction of coal, oil and gas, and through geothermal, hydroelectric, nuclear and to a lesser degree, solar and wind plants, the water consumption footprint is significant. Needless to mention that the extraction, processing and transformation of raw materials also require a major water ...
BySalher based in Madrid, SPAIN
One of the key security challenges in the present day world is the border security. The concern for increasing activity in terrorism as well as smuggling of illegal substances across the borders requires advanced detection technologies and close co-operation between the authorities and the instrument manufacturers. In particular, the deployment of practical efficient means to detect hidden persons and illegal substances at border crossing points is an instrumental challenge. The required trace gas analyzer, which ...
ByGasera Ltd based in Turku, FINLAND
Animal husbandry and soil are both large sources of greenhouse gas emissions. Read more about the causes and effects ...
ByGasera Ltd based in Turku, FINLAND
Continuous Emission Monitoring Systems (CEMS) are Deployed to Provide Critical Information Based on Gas ...
ByGasera Ltd based in Turku, FINLAND
A cleanroom is a controlled environment that has a low level of pollutants such as gas, dust, airborne microbes, aerosol particles, and chemical vapors. A cleanroom has a controlled level of contamination. The quality of air within a cleanroom is critical. Whether it be for the manufacturing of pharmaceutical products, for operating theatres or sterile services departments there is a legal obligation to have a qualified validation team certify the cleanroom is at the acceptable level and ISO ...
ByGasera Ltd based in Turku, FINLAND
Airborne Molecular Contamination (AMC) is a general term for existing molecular contaminations in clean room environments. These compounds belong to very different groups with very different mechanisms of damage. AMC is a concern for any high technology manufacturing process, especially in the microelectronic industry and is getting more and more in the focus of interest. AM-contaminations may cause adverse effects on production tools and consequently increase costs for high-tech companies. These airborne ...
ByIUT Technologies GmbH based in Berlin, GERMANY
At Weda we design, build and sell pool cleaners for swimming pools and commercial swimming facilities with high demands on performance and reliability. Maintaining good water quality requires both effective water cleaning processes and effective underwater surface cleaning. Furthermore, effective surface cleaning means the amount of chlorine added to the water can be reduced. This contributes to a better environment for both employees and visitors. One of many advantages being a lower risk for allergic ...
ByWeda Robotics based in Södertälje, SWEDEN
Weda has been developing and marketing robots for underwater cleaning since the 1970s. The robots are based on strong and efficient pumps in combination with brush systems that release the sediment from the bottom and walls. Weda AB stands for environmental friendliness and sustainability. We are at the forefront of our underwater cleaning solutions and our robots are world class. There are many different types of water reservoirs that need regular cleaning, preferrably without adding environmentally hazardous ...
ByWeda Robotics based in Södertälje, SWEDEN
HORIBA’s highly accurate Nitrous Oxide (N2O) analyzers represented in various types from stationary to portable, contribute to the environment protection and GHG emissions mitigation by quantification of N2O emission from wastewater treatment ...
ByHORIBA Europe GmbH based in Leichlingen, GERMANY
Valvitalia is a global leading manufacturer of flow control equipment in the Energy industry. The product portfolio includes on-off, control and safety valves, actuators, fittings, flanges, monolithic isolation joints, gas equipment, fire fighting systems and much more. Valvitalia provided products for the most important IOCs and some of the most important projects in the world. Key values are flexibility and engineering excellence. Company's priority is Customer’s satisfaction: Valvitalia is the One Stop ...
ByEusebi Impianti - Valvitalia SpA based in Rivanazzano Terme (PV), ITALY
ByAereon, part of Cimarron group based in Legnano (MI), ITALY