Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Agriculture
- Air and Climate
- Medical / Health Care
- Energy
- Environmental
- Oil, Gas & Refineries
- Food and Beverage
- Construction & Construction Materials
- Mining
- Chemical & Pharmaceuticals
- Waste and Recycling
- Pulp & Paper
- Metal
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Electronics and Computers
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Defense
- Packaging
- Commercial
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Textile
- Printing
- Forestry & Wood
- Dry Cleaning
- Communications / Telecom / Datacom
- Logistics
- Paint
- Travel & Leisure
- Government
- Retail
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Real Estate
Xprt Product Applications In Spain
2,178 applications found
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
ByQED Environmental Systems based in  Dexter, MICHIGAN (USA)
The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in  Wiesbaden, GERMANY
Membrane technology has made major progress in recent years and is nowadays the method of choice for many processes in the chemical industry, wherever substances are to be separated efficiently and gently. A prime example of this is dia-filtration, in which solutes and particles with higher molecular weights are retained while solutes with lower molecular weights are "washed" out of the process fluid. ...
ByMANN+HUMMEL Water & Fluid Solutions (previously MICRODYN-NADIR) based in  Wiesbaden, GERMANY
Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental ...
BymicroLAN B.V. - Aqualabo Group based in  Waalwijk, NETHERLANDS
Specific characteristics of this Industry: Large air flows. Medium VOC ...
ByTECAM based in  Polinyà , SPAIN
The water from this type of industry generates large amount of solids. The main sources of this waste are the phases of evisceration and blood draining, which contribute a large organic load. The application of our products is ideal for the treatment of this type of ...
ByAguambiente based in  La Cistérniga, SPAIN
The most significant problem in the dairy sector is the high concentration of fats and oils involved. This kind of water involves various pH values and peaks in temperature. These characters make a complex treatment system ...
ByAguambiente based in  La Cistérniga, SPAIN
Waste water in this sector has a high concentration of heavy metals, oils and products in decomposition. The oils and emulgents lead to foam production at the water treatment plants. The treatment of these oils is very ...
ByAguambiente based in  La Cistérniga, SPAIN
The water from pharmaceutical companies can cause big troubles because of the high variability in their manufacturing processes. Depending on the kind of raw materials used, the effluents may even be toxic, hence why the most conflictive effluents have to be separated from the rest and not to be sent to the general ...
ByAguambiente based in  La Cistérniga, SPAIN
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Protea has used our VOC gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, VOC abatement plants such as scrubbers and carbon-bed systems are typical installations where the use of Protea analysers and our VOC analysis expertise have proved valuable to plant operators. They prove a very powerful and flexible tool in both process gas measurements and VOC emissions monitoring. In the laboratory, Protea can deliver instruments with all the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The use of alternative combustion fuels that provide a renewable source of energy is a major area of research and investment. Sources of biomass fuels include virgin wood, energy crops, agricultural residues, food waste and industrial waste. Controlling the combustion process of any new fuel and keeping track of the biomass fuel emissions of combustion by-products is important to users of these new ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM