Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Agriculture
- Air and Climate
- Medical / Health Care
- Energy
- Environmental
- Oil, Gas & Refineries
- Food and Beverage
- Construction & Construction Materials
- Mining
- Waste and Recycling
- Chemical & Pharmaceuticals
- Pulp & Paper
- Metal
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Electronics and Computers
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Defense
- Packaging
- Commercial
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Textile
- Printing
- Forestry & Wood
- Dry Cleaning
- Communications / Telecom / Datacom
- Logistics
- Paint
- Travel & Leisure
- Government
- Retail
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Real Estate
Xprt Product Applications In Spain
2,171 applications found
For new plants in medium and large municipalities, the high efficiency plastic filling BIOFILL type A or BIOFILL type B can be installed. Choosing one or another depends on the requirements of the engineer who designs the plant. For a certain population, with the type A it will be needed a reactor with less capacity than with the type B. For small municipalities (less than 1000 inhabitants), the most recommended are the BIOFILL type A, or BIOFILL type B, for compact plants from 1000 inhabitants to a single ...
ByBiologia y Filtracion S.L ( Bio-Fil ) based in Santa Eulalia de Rongana, SPAIN
Thermal hydrolysis is a process where the long chain molecules which form cellulose and hemicellulose are broken apart using heat in order to obtain the constituent parts of the molecules. This makes it an economic pre-treatment for biomass being used to produce bioethanol or biogas. Given that cellulosic biomass is plentiful, it has attracted interest as a bioenergy feedstock which does not compete with cultivated food crops, avoiding potential negative price effects that the use of such crops for bioenergy may ...
ByHRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM
Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity's sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result, ...
ByKurz Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Specially designed and developed for food and beverage production, chemical–free ultraviolet water treatment eliminates all types of water-borne micro-organisms, including bacteria, moulds, yeasts, spores & viruses. Critically, UV treatment does not affect the organoleptic properties of water and other liquids, providing high rates of disinfection without any changes to taste, PH, texture and odour. This key benefit has seen UV systems widely deployed in all areas of food and beverage production, ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
With a number of units specially designed and developed for hydroponics and agriculture, atg UV’s treatment systems eliminate all types of water borne micro-organisms. atg UV Technology’s leading Ultraviolet treatment systems are used in a number of key areas to vastly reduce the risk of product rejection, crop failure and the spread of disease. With a number of “emerging” pathogens now displaying increased resistance to traditional methods of disinfection, Ultraviolet treatment is now the ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Reuse, is using the water again in a process for a different ...
BySistema AZUD, S.A. based in Alcantarilla, SPAIN
Fossil fuel or solar-thermal power plants require clean water for their operation. Water used may contain several impurities such as calcium, magnesium or silica which can cause damages to turbines or heat exchangers. For this reason, water must be treated by ionic exchange or mechanical filtration. Also, the appropriate wastewater treatment for its reuse through sand filters in order to contribute to a sustainable water use is of vital ...
ByPoltank S.A.U. based in Sant Jaume de Llierca (Girona), SPAIN
In an effort to minimize their short and long-term environmental impact, industries across the globe are facing increasing challenges and costs in the treatment of their process wastewater. As a result, many of these industries have built their own treatment systems in order to treat and reuse process streams, reducing discharge costs to municipal treatment plants and recovering valuable products from ...
ByBerghof Membranes Technology GmbH (BMT) based in Leeuwarden, NETHERLANDS
Industry challenge: In metal manufacturing and metal processing a wide variety of processes, e.g. metal cutting, surface processing and forming, are required to achieve a high-quality product. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are emulsions (coolants and lubricants), separating agents (from aluminum die casting, autoclaving), cleaning waters, rinsing and ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Industry Challenge: The waste disposal, recycling and remediation industries produce a great variety of wastewaters. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are process waters from metal recovery, metal recycling, and waste minimisation! Our evaporator technology effectively cleans process wastewaters and produces up to 98% re-usable high-quality distillate. You ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
We develop efficient solutions to meet the particular wastewater treatment needs of small towns, up to 2.000 population equivalent (PE), and medium-sized towns, up to 4.000 PE. ...
BySalher based in Madrid, SPAIN
Heating water for showers, laundry, dish-washing and other uses costs you money - and it's money that literally flows right out of your building and into the sewers. Fight back by installing a DDI heat exchanger that circulates that waste heat past the incoming cold water flow. The heat exchanger warms the incoming flow, reducing the operating cost of your water heaters, boilers, laundry operations, dishwashers and other energy users. Savings can be considerable, and ongoing. For example, consider a hotel, with ...
ByDDI Heat Exchangers Inc. based in Dollard-Des-Ormeaux (Montreal), QUEBEC (CANADA)
HIMOLOC Technology allows to obtain exclusive and highly effective polymers that make a difference in many of your applications. Our functional polymers are formulated to offer competitive advantages in paper and board manufacturing, especially in the wet end chemistry area, helping mills improve their retention and drainage programs and increase their production. It also includes products to improve mechanical properties (wet and dry strength), inter-layer adhesion (Ply Bond), sizing fixation and White Water ...
ByDerypol, S.A. based in Barcelona, SPAIN
Eliminate Liquid Discharge to the Environment: Zero Liquid Discharge (ZLD) is a strategic, wastewater management system facilities adopt to avoid discharging industrial wastewater into the environment. This is an engineered approach to water treatment, resulting in water recycle, recovery and reuse. Kurita America has developed a five-phase approach to zero liquid discharge projects, allowing our team to engineer the optimal system for industrial facilities. We model and combine various technologies including ...
ByKurita America Inc. based in Minneapolis, MINNESOTA (USA)
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in Hannover, GERMANY
In desalination plants it is of great importance for the operation of the entire plant that the pre-treatment of the water is good before the salt is to be removed. For reverse osmosis (RO) desalination plants a good pre-treatment is essential for avoiding membrane fouling, resulting in reduced water production and increased operational ...
ByFiltralite - Leca Norge ASFiltralite based in Rælingen, NORWAY
Filter beds with pre-filter are simple, efficient and environmentally friendly ways of treating domestic wastewater from detached houses and holiday homes. The requirements related to operation and maintenance are few in relation to traditional compact plants. These systems can also be adapted to suit clusters of houses, schools, kindergartens, small companies ...
ByFiltralite - Leca Norge ASFiltralite based in Rælingen, NORWAY
Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...
ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM
Since the inception of water treatment and the monitoring of dirty water, STS has provided renowned manufacturers of respective installations with ...
BySTS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND
The main objective in wastewater treatment is to allow human and industrial effluent to be disposed of without endangering human health or the natural environment. We, in EPT, design "tailor made" solutions include physical/chemical and/or biological treatment. The biological solutions includes aerobic treatment, anaerobic treatment allowing biogas production as well as membrane technologies enabling water ...
ByEnvironmental Protection Technologies Ltd. (EPT) based in Bnei Brak, ISRAEL