Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Agriculture
- Air and Climate
- Medical / Health Care
- Energy
- Environmental
- Oil, Gas & Refineries
- Food and Beverage
- Construction & Construction Materials
- Mining
- Chemical & Pharmaceuticals
- Waste and Recycling
- Pulp & Paper
- Metal
- Soil and Groundwater
- Automobile & Ground Transport
- University / Academia / Research
- Electronics and Computers
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Defense
- Packaging
- Commercial
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Textile
- Printing
- Forestry & Wood
- Dry Cleaning
- Communications / Telecom / Datacom
- Paint
- Travel & Leisure
- Government
- Logistics
- Retail
- Banking & Finance / Insurance / Legal
- Leather & Tanning
- Real Estate
Xprt Product Applications In Spain
2,179 applications found
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
CFC usage in industry Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
There are strict regulations in place surrounding waste water, which makes it very important to monitor. Even small changes in aquatic ecosystems can have a huge impact in the chemical makeup of water, temperature, etc. By using real time monitoring on water quality, pollutants can be detected and mitigated before they pose a potential threat to these ecosystems and enter the water course. The rugged AP-2000 allows for real time testing of wastewater and helps to minimise risk of any potential fines. It is works ...
ByAquaread Ltd, Part of the NKE Group based in  Broadstairs, UNITED KINGDOM
ByFAST-ACT based in  Topeka, FLORIDA (USA)
The accurate measurement of a gas mixture is essential to metal and mineral processing. Reliable measurements are needed to manage processes ranging from effective combustion control to optimized process ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
The pharmaceutical industry poses many chemical hazards which can be detected using our PID technology. Our range of personal, portable of fixed VOC detectors will give an unrivalled solution when you want to detect a mixture of uncommon hydrocarbons. Use our tried and tested VOC detectors if you want to measure VOC concentration in a production facility or storage ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
Our leading PID gas sensors are recognised around the world by original equipment manufacturers for their longevity and critically their resistance to ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi, and minerals such as iron and manganese. Ozone (O3) gas is commonly used in this contaminant removal industrial process as an effective and economical oxidizer. ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Numerous studies have shown that non-exhaust emissions can equal or even exceed those from the exhaust, and we have a measurement system for both types of emissions. Also, the discussions around Euro 7 emission standards has increased the interest and need for non-exhaust ...
ByDekati Ltd. based in  Kangasala, FINLAND
The main objective in wastewater treatment is to allow human and industrial effluent to be disposed of without endangering human health or the natural environment. We, in EPT, design "tailor made" solutions include physical/chemical and/or biological treatment. The biological solutions includes aerobic treatment, anaerobic treatment allowing biogas production as well as membrane technologies enabling water ...
ByEnvironmental Protection Technologies Ltd. (EPT) based in  Bnei Brak, ISRAEL
Better decision making through accurate weather data and state of the art technology. The energy sector is highly sensitive to changes in weather and events that are hard to forecast like storms, fog, snowfall or freezing rain can lead to huge losses. Meteomatics develops pioneering technologies and uses latest scientific methods to deliver highly accurate weather data for every location on the ...
ByMeteomatics AG based in  St. Gallen, SWITZERLAND
In industry, a lot of water is needed and is contaminated by a wide range of pollutants in the most diverse production processes. Unfortunately, most of the industrial waste water is wasted. In order to avoid this, we are developing high-performance waste water treatment plants with the vacuum evaporator as the core element. ...
ByKMU LOFT Cleanwater GmbH based in  Hausen, GERMANY
Global water shortages due to droughts, population growth and stringent enviromental discharge regulations have created increasing interest in water reuse and recycling. Pressured membrane processes, in particular, reverse osmosis (RO), are well-established technologies in water treatment. However, the drawbacks of RO membrane filtration include high energy consumption and operational costs. In addition, the volume of RO concentrate (reject) produced by RO systems is significant and, in most cases, contain high ...
ByBerghof Membranes Technology GmbH (BMT) based in  Leeuwarden, NETHERLANDS
The dairy industry has utilized membrane filtration as a vital component of the manufacturing process since the early 1960’s. Due to the large quantities of water used in dairy processing, considerable volumes of effluent must be treated and neutralized before being discharged back into the environment. Many countries have implemented environmental taxes and discharge costs that make it even more critical for dairy processors to implement effective and efficient means of treating dairy effluent and ...
ByBerghof Membranes Technology GmbH (BMT) based in  Leeuwarden, NETHERLANDS
The production of food and beverage consumes high volumes of process water and then generates highly polluted organic waste water. The high peaks of wastewater increase the cost of treatment, and should also ensure that there is much storage required for equalization of the contaminated water. The wastewater from food & beverage plants often contains high concentrations of biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solids (TSS), fats, oils and nutrients in varying ...
ByBerghof Membranes Technology GmbH (BMT) based in  Leeuwarden, NETHERLANDS
There are two types of stationary air pollution sources: Point source pollution (boiler rooms, process, power stations, etc…). Surface pollution (landfill sites, farms, etc…). The main pollutants concerned are mercury, NOx (produced by combustion), VOCs, heavy metals, dioxins (mainly produced by incineration plants), as well as smells (e.g. treatment of co-products in the food processing industry). ECOMESURE provides instruments that measure the pollutant concentration coming out of industrial sites ...
ByEcomesure based in  Saclay, FRANCE
We Provide smart, reliable accurate SMR online water quality analyzers and cutting edge HMI multiparameter controller to monitor water quality in wastewater treatment and industrial process ensure overall performance and compliance of ...
ByAquas Inc. based in  Taipei City, TAIWAN
There is no better tool than our submarine drones for the routine inspection of your nets or cages, for feeding control or underwater lights, for net cleaning, species monitoring, the control of different processes or the solution of mort lift problems. You can focus your business on increasing production, while reducing costs. In addition, the lateral movement of our drones allows technicians to perform side inspections easily, simply by piloting the ROV around the cage. ...
ByNido Robotics based in  Murcia, SPAIN