Refine by
Industries served
- Agriculture
- Water and Wastewater
- Chemical & Pharmaceuticals
- Oil, Gas & Refineries
- Monitoring and Testing
- Air and Climate
- Energy
- Mining
- Food and Beverage
- Glassware
- Medical / Health Care
- Pulp & Paper
- Waste and Recycling
- Maritime/Shipbuild/Water Transport
- Environmental
- Soil and Groundwater
- University / Academia / Research
Xprt Product Applications In Sudan
63 applications found
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring elemental and total mercury. There is a risk of toxic mercury being released into the air at for example waste incineration and cement production, and from coal-fired thermal power plants. To prevent this, there are requirements for flue gas treatment with low emission limits, and requirements for monitoring of the levels not exceeding these limits. OPSIS offers well-proven and certified systems for the required monitoring of mercury levels, both elemental mercury and the mercury compounds collectively ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Ships: floating fossil power plants with emissions to air as for land-based power plants. The UN agency IMO has issued rules (the MARPOL convention) on the limitation of ship emissions into the ambient air. Among other things, nitrogen oxides (NOX) and sulfur (sulfur dioxide, SO2) are regulated. OPSIS has the instruments to monitor the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS provides various monitoring solutions for marine vessels. One application is to monitor in Inert Gas Generators (IGG) onboard ships to control the quality of the nitrogen. The reliable systems supply accurate values continuously, and presents it directly to the control ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring of fugitive emissions from industrial facilities. Most of the OPSIS gas analysis systems are based on monitoring methods with open measurement paths. This provides a perfect tool for monitoring the air quality and detecting any gas leaks from industrial facilities so that staff and nearby residents can be alerted and measures can be taken ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Port environments can be particularly exposed to air pollution, both in gaseous form and as particles. The ships are an obvious source, but both activities related to the unloading and loading of goods and land traffic to and from the ports can also contribute. Monitoring the concentration of air pollutants can be done both in order to monitor the environment in general and to map the sources. In the case of emissions from ships, it may be of particular interest to monitor sulfur dioxide (SO2) levels near the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
How clean is the ambient air in our cities? A common strategy for monitoring the air quality in a city is to measure at ground level where people actually live and are at risk of exposure to air pollution. Often, there is also a requirement that the measurements are made in a place where you can expect the air pollution to be relatively high, which often means along one of the city's busier streets. Limit values for air quality often apply precisely to these locations. OPSIS offers several monitoring systems for ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The almost closed environment means that high levels of air pollution often occur inside the tunnels. The limit values for the pollutants are often higher in tunnels than in open ambient air because the exposure time is normally limited, but it may still be necessary to monitor that the limit values are not exceeded. Traffic tunnels often have to be provided with ventilation to keep the levels of air pollutants below the applicable limit values. To save energy, however, it is common not to operate the fans more ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Various types of sulfur compounds often arise during the production of paper pulp. There are emission limits and monitoring requirements, often expressed as total reduced sulfur, TRS. TRS includes hydrogen sulfide, H2S, and the sulfur compounds methyl mercaptan, dimethyl sulfide, and dimethyl disulfide. OPSIS offers systems to monitor both H2S and ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Air pollution at regional and national scales. It is important to monitor air pollution where many people stay, i.e. in cities and especially at street level. In order to better understand where the pollution comes from, a so-called background monitoring may also be needed. Then the monitoring station is placed in the countryside, at a great distance from obvious sources of the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS EEx Zone 1 and 2 certified monitoring equipment meets the demands for monitoring in harsh areas with a high amount of corrosive gaseous compounds. OPSIS offers two monitoring solutions, TDL (Tuneable Laser Diode) technology with ER060L-EEx emitter and receiver set, for harsh installations, and OPSIS O2000 oxygen monitor. The most suitable technique is used for the application at ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS is a world-leading supplier of gas monitoring systems for various special applications in the process control sector. The OPSIS process monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive process control systems. We also provide additional products and services, including dust and flow ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS offers monitoring systems for continuous emissions monitoring and process control at power plants. The systems meet and exceed high demands on availability, speed, versatility, and low operating ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Monitoring in raw gas places high demands on the instruments. The temperatures are high and the gases are often reactive. There may also be high dust levels. In order to control flue gas cleaning, the monitoring systems must also be able to react in near real time. However, these are no problems for OPSIS non-contact monitoring systems, which work excellently in these circumstances, with high availability and low operating ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
In recent years, increasingly strict requirements have been introduced to minimise sulfur emissions from shipping. One way to comply is to run the ships with low-sulfur oil, but this can be expensive. An alternative that makes it possible to continue using high-sulfur oil as fuel is to install SO2 scrubbers that clean the flue gases to the same level as if the ships were fueled with low-sulfur oil. However, the scrubbers must be monitored by measuring the ratio of SO2 to CO2 concentrations. Here, OPSIS has a ...
ByOPSIS AB based in Furulund, SWEDEN