Refine by
Industries served
- Monitoring and Testing
- Water and Wastewater
- Manufacturing, Other
- Agriculture
- Energy
- Medical / Health Care
- Food and Beverage
- Mining
- Construction & Construction Materials
- Environmental
- Waste and Recycling
- Oil, Gas & Refineries
- Air and Climate
- Pulp & Paper
- Electronics and Computers
- Metal
- Chemical & Pharmaceuticals
- Aerospace & Air Transport
- University / Academia / Research
- Soil and Groundwater
- Health and Safety
- Maritime/Shipbuild/Water Transport
- Automobile & Ground Transport
- Defense
- Glassware
- Packaging
- Paint
- Forestry & Wood
- Textile
- Government
- Commercial
- Plastics & Resins
- Printing
- Real Estate
- Communications / Telecom / Datacom
- Travel & Leisure
- Retail
- Logistics
Xprt Product Applications In Sweden
1,329 applications found
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Monitoring exhaust gas from combustion engines, emitting a large number of different compounds and with rapidly changing concentrations due to variations in operating conditions, necessitates an instrument that measures in real-time and with high sensitivity – an IONICON PTR-TOFMS. ...
ByIonicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA
Reciprocating internal combustion engines burning natural gas are a source of formaldehyde emissions. There are strict tolerances imposed on operators of engines to ensure that formaldehyde is removed effectively and that formaldehyde emissions are below published limits. The only instrumental method for formaldehyde monitoring is FTIR, following procedures such as US EPA Method 320 and Environment Agency TGN M22. Protea’s FTIR gas analysers have been specifically designed to follow these methods and our ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Total Volatile Organic Compounds (VOCs) is a common measurement required from industrial emissions. Commonly, a single measurement value is obtained through the use of a Flame Ionisation Detection (FID) analyser. The pyrolysis of the gas stream in a FID analyser allows it to make a measurement of the carbon content of the gas stream. FID analyser cannot indicate the relative abundances of different organic species in a gas stream and often have widely different responses for different gases. However, they are ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
This method uses a suspension of ground plant material to directly measure the potassium concentration. It eliminates the usual steps of ashing and subsequent dissolution of the resulting ash. The method was compared to alternative methods such as chemical analysis and spectrophotometric methods. Collaborative studies using a range of samples gave a mean of 1.74% potassium by this extraction technique as compared to 1.75% by alternative methods. The standard deviation of an analysis in the two different sample ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
These methods are adapted from methods for the determination of sodium and potassium in fatty-acid methyl ester samples. The sample is diluted with an organic solvent (xylene, cyclohexane or petroleum ether) plus a stabiliser. The calibration standards which have a similar matrix to the prepared sample solutions, are prepared from sodium and potassium organometallic salts which are dissolved in a solution of xylene with a stabiliser. These European Standards specify a method for the determination of potassium of ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Wine is of particular interest nutritionally because it is typically low in sodium and relatively high in potassium. Sodium is the predominant cation in breakfast cereals, at levels reaching 8mg/g. Potassium and calcium also vary, particularly in wheat-based products and those enriched with milk products or calcium ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
This method allows the analyte to be pre-concentrated in the final solution, decreases the volume of strong acid used in the dissolution stage and does not use organic ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
ByBWB Technologies Ltd. based in Newbury, UNITED KINGDOM
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ...
ByServomex - a Spectris Company based in Sugar Land, TEXAS (USA)
Hydrocarbon Processing is one of the most demanding industries in the world. High levels of productivity must be achieved while constantly maintaining the very highest safety standards. Effective gas analysis is a critical component of all HP processes, typically requiring a wide range of measurements to ensure the safe, optimized running of the ...
ByServomex - a Spectris Company based in Sugar Land, TEXAS (USA)
The accurate measurement of a gas mixture composition is essential to a wide range of industries and processes. Whatever your application, the key to this success is effective gas analysis you can trust to keep your operations ...
ByServomex - a Spectris Company based in Sugar Land, TEXAS (USA)
The emission challenge is significant to ETG Risorse e Tecnologia. For years it has been engaged in providing instrumentation and support to authorities and companies operating in the environmental sector. Climate change is a scientifically established reality, as is its anthropogenic origin; emissions of pollutants into the atmosphere are one of its leading causes. Their monitoring - in addition to being mandatory - allows their level to be kept under control. ETG fully supports the Green Deal and the European ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
Air emissions do not only belong to the industrial sector. Transport is subject to equally strict regulations, complicated by the main feature that these vehicles accumulate: crossing national borders. The limits may become stricter depending on the territory you are travelling through, particularly for the marine ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
Engine emission measurements are typically made in very different environments and conditions depending on the purpose of the measurement. Standardized and regulated particle emission measurements are made in test cell environments, PTI stations and on board a moving vehicles according the details described in the regulations and standards. For various research purposes, engine emissions can be measured in different conditions and even pre-DPF conditions. The requirements for the measurement instrument in these ...
ByDekati Ltd. based in Kangasala, FINLAND
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and also measurement ...
ByDekati Ltd. based in Kangasala, FINLAND
The combined heat and power plant sectors, has been witnessing a steady growth over the past few years. With production capacity growing every year, these plants constitute an important part of our energy future. Driven by legal regulations to measure all stationary emission sources in reducing greenhouse gases, pollutants, as well as operators requiring improved feedback on thermochemical processes, for efficient plant operations. The market demands a complete Continuous Emission Monitoring System (CEMS) designed ...
ByNorsk Analyse AS based in Barkåker, NORWAY