- Home
- Applications
- sweden
- no no2
Show results for
Refine by
No No2 Product Applications In Sweden
17 applications found
All six of our low concentration ozone monitors have been designated by the US Environmental Protection Agency (EPA) as Federal Equivalent Methods (FEMs), and our new Model 405 nm NO2/NO/NOx Monitor is designated as a FEM for ...
By2B Technologies based in Boulder, COLORADO (USA)
Premium
These instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. All ozone generators are factory calibrated using a NIST traceable ozone standard. ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
Premium
The new and unique AS32M NO2 analyzer using CAPS (Cavity Attenuated Phase Shift) technology is an ideal solution for medical device applications such as INO (Inhaled Nitric Oxide). Originally designed for NO2 monitoring in roadside pollution surveillance and air quality applications, the AS32M is suitable for numerous other NO2 monitoring applications. ...
ByENVEA based in Poissy, FRANCE
Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Premium
Monitoring real emissions from vehicles with combustion engines. Emissions from vehicles powered by fossil fuels have traditionally been tested in laboratories, but the results rarely reflect reality. Therefore, rules regarding "Real Driving Emissions" (RDE) have been added. The emissions are then measured correctly in a real environment and during real driving. OPSIS offers an RDE monitoring system based on the well-proven DOAS ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A tough environment requires toughened monitoring equipment. Process monitoring at a sulfuric acid plant requires good and reliable detection of, among other things, sulfur dioxide (SO2) in gas phase. This can be a challenge due to high concentrations of SO2, high temperatures, and high pressure. Monitoring may be needed at several locations in the process where SO2 concentrations may vary from a few mg/m3 to several percent by volume. Not all monitoring systems can handle these conditions and those that do ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
While the applications may be standard, the performance and quality of our systems are anything but. Every unit is engineered with precision and built to deliver exceptional reliability and accuracy, far exceeding typical ...
ByEnvironics, Inc. based in Tolland, CONNECTICUT (USA)
In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
In some countries they do not allow tunnel atmosphere monitors to be mounted on the tunnel wall; also, where there is a single bore it is very difficult to gain access for maintenance purposes. The TunnelTech 400 series are extractive gaseous pollutant and visibility monitors and extract a gas and dust sample from the tunnel bore and carry to a remote analyser. This allows maintenance to take place without affecting tunnel traffic ...
ByCodel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM
Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Air emissions do not only belong to the industrial sector. Transport is subject to equally strict regulations, complicated by the main feature that these vehicles accumulate: crossing national borders. The limits may become stricter depending on the territory you are travelling through, particularly for the marine ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Over the past few years there has been an enormous surge in interest in the application of low-cost sensors to measurements of air pollutants by educators, citizen scientists and members of various groups interested in air pollution levels in their own ...
By2B Technologies based in Boulder, COLORADO (USA)
Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC ...
ByProtea Limited based in Middlewich, UNITED KINGDOM