- Home
- switzerland
- Applications
Refine by
Industries served
- Monitoring and Testing
- Manufacturing, Other
- Water and Wastewater
- Medical / Health Care
- Agriculture
- Food and Beverage
- Environmental
- Energy
- Automobile & Ground Transport
- Oil, Gas & Refineries
- Air and Climate
- Construction & Construction Materials
- Mining
- Chemical & Pharmaceuticals
- Electronics and Computers
- Metal
- Aerospace & Air Transport
- Glassware
- Pulp & Paper
- University / Academia / Research
- Waste and Recycling
- Plastics & Resins
- Soil and Groundwater
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Commercial
- Defense
- Textile
- Health and Safety
- Government
- Paint
- Printing
- Logistics
- Banking & Finance / Insurance / Legal
- Forestry & Wood
- Travel & Leisure
- Retail
- Packaging
Xprt Product Applications In Switzerland
1,203 applications found
Introduction: DMS (Dimethylsulfate) is a liquid compound with a high vapor pressure. It is a widely used basic chemical in the production of Agrochemicals, Cosmetics and Pharmaceutics. It is very toxic at ppb- concentrations already, but also carcinogenic and mutagenic. Furthermore by hydrolysis sulfuric acid is formed, so it is very corrosive also. Since there’s no warning effect in terms of irritation and/ or odor, dangerous amounts can be incorporated without realizing. The effects of intoxication, which ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Ethylene oxide is a highly flammable and toxic gas which is the main precursor in the production of Ethylene glycol but also widely used in the medical sterilization. The Ethylene oxide sterilization is applied on medical and pharmaceutical products which cannot resist the high temperature ranges in usual steam sterilization processes. Certain products in the food industry are sterilized in the same way. Ethylene oxide gas penetrates the packaging as well as the product and kills all microorganisms ...
ByIUT Technologies GmbH based in Berlin, GERMANY
The automotive industry is a major air pollution contributor and thus one of the most regulated industries in the world. Several gas monitoring techniques are widely used in the automotive industry for measuring vehicle emissions. Typical applications include live on-board exhaust monitoring (CO, CO2, N2O, NOx, formaldehyde, acetaldehyde, oxygen and moisture), analysis of raw and dilute exhaust gas from the engine and tailpipe with gas-bags (CO2, N2O, NOx, CH4, EtOH, THC, H2S, SO2, NH3, formaldehyde and ...
ByGasera Ltd based in Turku, FINLAND
Air pollution causes millions of deaths worldwide and costs the world economy $5 trillion per year. Over 90% of the world’s population lives in places where air quality exceeds World Health Organization’s (WHO) guideline limits. Therefore, air pollution has become a major global challenge in the past years. Human activity and natural processes can both generate air pollution. Typical sources of air pollution are e.g. traffic, energy production, manufacturing and chemical industries, fumes from ...
ByGasera Ltd based in Turku, FINLAND
Each year millions of containers arrive in ports around the globe. Typical international cargo has to travel for a long time in varying temperature and humidity conditions. Even though it may be inspected and considered to be safe prior to leaving its destination, hazardous chemicals and fumigants can off-gas during the transit. The combination of sealed containers and long journey times means that chemicals can build to a level that would never normally be encountered in domestic or industrial settings. In the ...
ByGasera Ltd based in Turku, FINLAND
Weda designs and develops underwater cleaning equipment for tanks and reservoirs in industries like Nuclear Power stations, glass works, steel works, pulp and paper facilities etc. Weda has delivered and installed cleaners in nuclear power plants, glass factories, fish farms, gypsum plants, pulp and paper mills and several other applications where there is a need for cleaning (sludge removal) without having to drain the water. ...
ByWeda Robotics based in Södertälje, SWEDEN
Weda has supplied underwater cleaners to nuclear plants for more than 40 years. Weda has also been collaborating with Westinghouse since 2008, one of the leading suppliers of equipment for the nuclear industry. Westinghouse is handling the sales to the nuclear industry and you can contact them or us if you want to get more information. In collaboration with Westinghouse Electric AB Weda has developed the robot U-DEC (Underwater Decontamination Unit) for cleaning the walls and the bottom of the reactor basin before ...
ByWeda Robotics based in Södertälje, SWEDEN
Our priority is to offer and maintain an environmentally friendly and sustainable solution for the environment, nature and marine life. A non-invasive cleaning solution (sediment removal) that does not affect the health or environment of the fish is a key priority for sustainable fish farming. Weda´s robots offer this solution without having to empty their tanks and without staff having to stay in the fish's ...
ByWeda Robotics based in Södertälje, SWEDEN
Speed up your mechanobiology study by performing single-cell adhesion measurements with the FluidFM technology! Traditionally, in Single-Cell Force Spectroscopy (SCFS) assays, the object of interest is glued to an AFM cantilever resulting in complex handling and low throughput. The FluidFM systems solve this issue by reversibly immobilizing a cell to a FluidFM Probe via suction, and subsequent release with a pressure pulse or brief washing. This gentle exchange of the cell allows the cantilever to be re-used for ...
ByCytosurge AG based in Glattbrugg, SWITZERLAND
The CAST (Combustion Aerosol Standard) soot generator has a wide range of applications across various fields. Here are some of the key uses: Calibration of Measurement Instruments: CAST is extensively used to calibrate instruments that measure particulate matter, such as smoke meters, mass monitors, and laser-induced incandescence analyzers. Filter and Catalyst Testing: CAST soot generators are used to evaluate the performance of diesel particulate filters (DPFs) and other emission control devices. This helps in ...
ByJing Ltd. based in Zollikofen, SWITZERLAND
STS has been a hydrologist partner for many years, and through this work we have developed the experience to become specialists in the monitoring of river, lake and ground water levels. Measuring groundwater level is critically important for identifying long term trends, including declining water levels, saltwater intrusion, seasonal variations, aquifer recharge, artificial aquifer storage and recovery, and level status for drinking ...
BySTS Sensor Technik Sirnach AG based in Sirnach, SWITZERLAND
Unwanted tastes and colours must be dealt with and impurities need effective removal. Beverage producers demand very high purity in the water and many times the water supply from local sources needs further treatment. Public health and safety issues are at the top of the list. Activated carbons possess a diverse range of pore properties that are perfect for adsorption of numerous chemical compounds. Jacobi’s AquaSorb and ColorSorb products are ideal for this application. ...
ByJacobi Group based in Kalmar, SWEDEN
Water. One of the world’s most precious resources for drinking, irrigation or industrial processes. The supply of clean, fresh water continues to be more and more constrained as populations rise and water demands grow on our planet. Activated carbon is one of the best technologies available for improving water quality. Jacobi’s AquaSorb range of activated carbon is specifically designed for use in liquid phase adsorption systems. ...
ByJacobi Group based in Kalmar, SWEDEN
Ozone is now widely used for treatment of municipal water because of its greater effectiveness in killing pathogens such as bacteria and their spores and in deactivating viruses. Increasingly, ozone is being used in other industrial applications such as in HVAC systems for removing hydrocarbons and cigarette smoke from buildings, in the sterilization of medical instruments, soil and ground water remediation, preservation of fruits and vegetables during storage, processing of food products, ozone laundries, etc. ...
By2B Technologies based in Boulder, COLORADO (USA)
Cooling Water Systems Solutions: Cooling water imposes numerous challenges in the operation of industrial facilities and its quality is subject to always keeping track of and controlling of major issues like corrosion, biological contamination (microorganisms like bacteria, algae, fungus etc), fouling and scale. Under these difficult conditions, the water quality in cooling towers determines the reliability of the facility and the lifetime of the equipment: towers, piping, heat exchangers. An appropriate water ...
ByFineamin SA based in Geneva, SWITZERLAND
The highest quality demands require high safety. ...
ByAqua Innovation GmbH based in Rotkreuz, SWITZERLAND
Desah can provide a black water treatment system consisting of a thermophilic digestor, nitrogen and phosphate removal. With this system we can produce biogas, remove micropollutants and produce ...
ByNoardling B.V. based in Sneek, NETHERLANDS
The pulp and paper industry demands significant volumes of fresh and process water for various production stages. For both economical and ecological reasons, the industry aims to treat wastewater efficiently and recycle as much process water as possible within a closed-loop system. The purpose of the sludge obtained, containing valuable recyclables, is to be reused, and the residual sludge with minimal water content is processed for disposal. MUST's 'Molecular Unique Separation Technology' (MUST) addresses these ...
ByMUST Water Technology AG based in Winterthur, SWITZERLAND
In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification. Further applications are: Diluting and conveying acids and lye during the process of regenerating ion ...
ByKörting Hannover AG based in Hannover, GERMANY
Industry challenge: In metal manufacturing and metal processing a wide variety of processes, e.g. metal cutting, surface processing and forming, are required to achieve a high-quality product. Water is an indispensable ingredient in many of these processes. Depending on the process, it can contain a whole variety of materials and substances. Typical types of metal industry wastewaters are emulsions (coolants and lubricants), separating agents (from aluminum die casting, autoclaving), cleaning waters, rinsing and ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY