Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Oil, Gas & Refineries
- Energy
- Electronics and Computers
- Agriculture
- Environmental
- Mining
- Food and Beverage
- Medical / Health Care
- Chemical & Pharmaceuticals
- Construction & Construction Materials
- Automobile & Ground Transport
- Pulp & Paper
- Soil and Groundwater
- Glassware
- Metal
- University / Academia / Research
- Aerospace & Air Transport
- Defense
- Plastics & Resins
- Health and Safety
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Paint
- Printing
- Textile
- Forestry & Wood
- Waste and Recycling
- Travel & Leisure
- Government
- Commercial
- Banking & Finance / Insurance / Legal
- Household Appliances
- Retail
- Packaging
Xprt Product Applications In Taiwan
1,292 applications found
Component placement verification in electronic assemblies presents metrology challenges that are almost as wide and varied as the range of electronic designs and the types of components used. Key process control parameters that must be measured include component positioning and rotation (X, Y, and theta) relative to pads, as well as checking for missing and/or damaged ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Leadframe inspection presents a wide variety of feature sizes and geometry, requiring metrology systems that can be flexibly programmed for fast and accurate three-dimensional measurements. Die-to-pad placement/alignment, lead positions/sizes, lead tilt and twist angles, pitch, lead widths, lead-coplanarity, and dam-bar dimensions all represent critical factors that must be tightly controlled. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
As today’s semiconductor designs continually become smaller and denser, the challenges of wafer inspection are constantly escalating. Extremely small feature sizes can require 50X or higher objective lens magnification and highly programmable top-lighting/back-lighting, along with ultra high-resolution accuracy and ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Flex circuit technologies pose a wide range of metrology challenges with a large number of different circuit geometries, pitch dimensions, and surface reflectivity factors. To meet these challenges, metrology systems for flex circuit inspection must incorporate advanced functionality such as versatile lighting, large-size stages, high-resolution positioning, and very accurate laser probe capabilities. ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Inspection processes for read/write heads require high-precision non-contact metrology functions to control tight Z-axis tolerances in the read/write gap measurements and Z dimension variations from the side rails to the top surface of pole-tip ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Quality assurance and inspection of critical automotive components such as precision nozzles require metrology systems that can effectively combine both extremely accurate measurement and a high-level of process flexibility. To ensure robust performance over extended usage under very demanding environmental conditions, injector components must be controlled to very close tolerances across a number of different features, such as multiple diameters, length, taper, angles, and aperture ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
The inspection of electrical test probes requires precision metrology capabilities to accurately measure small features such as the positioning, pitch, and coplanarity of test lead ends. Fast and repeatable precision inspection processes often require a combination of multiple magnifications, high-performance video auto-focus with 50X lens, and/or through-the-lens laser options for rapid Z-axis ...
ByVIEW Micro Metrology based in  Rochester, NEW YORK (USA)
Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal's EyeCGas Optical Gas Imaging camera, for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in ...
ByOPGAL based in  Karmiel, ISRAEL
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
If industrial wastewater entering a treatment works contains toxic components the rate of biodegradation will be inhibited or stop completely. This can result in failed consents and will certainly give rise to operational problems. Visible indications include deflocculation, bulking and the appearance of filamentous bacteria. Sometimes, there are no visible effects. When the sludge bacteria are inhibited, there is the possibility of toxicity carryover in the effluent that is discharged to receiving waters. With ...
ByStrathkelvin Instruments Limited based in  North Lanarkshire, UNITED KINGDOM
ByHORIBA Europe GmbH based in  Leichlingen, GERMANY
ByBuck Scientific Inc based in  Ansonia, CONNECTICUT (USA)
BioSolve Pinkwater eliminates fire and explosion hazard when sprayed directly onto a fuel/oil spill. Aggressive agitation with a course stream reduces volatilization and causes LEL readings to immediately decline, possibly registering “0.” Application of Pinkwater also facilitates roadway cleanup and elimination of hazardous oil ...
ByThe BioSolve Company based in  Lexington, MASSACHUSETTS (USA)
BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment. Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results. ...
ByThe BioSolve Company based in  Lexington, MASSACHUSETTS (USA)
For over twenty years, BioSolve Pinkwater has been used for Surfactant Enhanced Remediation (SER) to mobilize and solubilize residual NAPL[i], facilitating its recovery and disposal. Depending on soil and plume characteristics, Pinkwater solution can reach contaminated zones through deep injection wells or be gravity fed from surface level injection galleries. After desorbing residual NAPL from soil surfaces on contact, Pinkwater then solubilizes the hydrocarbons in an aqueous emulsion, enabling extraction at down ...
ByThe BioSolve Company based in  Lexington, MASSACHUSETTS (USA)
ByIn-Situ Process based in  Fort Collins, COLORADO (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)