Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Oil, Gas & Refineries
- Energy
- Electronics and Computers
- Agriculture
- Environmental
- Mining
- Food and Beverage
- Medical / Health Care
- Chemical & Pharmaceuticals
- Automobile & Ground Transport
- Construction & Construction Materials
- Pulp & Paper
- Soil and Groundwater
- Glassware
- Metal
- University / Academia / Research
- Aerospace & Air Transport
- Defense
- Plastics & Resins
- Health and Safety
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Paint
- Printing
- Textile
- Forestry & Wood
- Commercial
- Waste and Recycling
- Travel & Leisure
- Government
- Banking & Finance / Insurance / Legal
- Retail
- Packaging
- Household Appliances
Xprt Product Applications In Taiwan
1,292 applications found
Introduction: Ammonia (NH3) is a well-known, widely spread air pollutant, which is present almost everywhere in low ppm/ppb concentrations. So this chemical can be found in various processes, where gases are the basic media, such as steam crackers producing gaseous hydrocarbons for further production steps like polymerization. Gases like this are for example Ethylene, Propylene and even so called cracker gas, which is mostly a mixture of above mentioned gases as well as Water and Hydrogen. The gases of interest ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Chlorodimethylether (CMME) and Bis Chloromethyl-ether (BCME) as well as Ethylene dichloride (EDC) and Methylene chloride (DCM) are well known as carcinogenic substances, like other chlorinated hydrocarbons. BCME is also very toxic. These particular chemicals are widely used in the world of chemical industry, especially in the production process for ion exchange resins. CMME in that case acts as a precursor for those resins while BCME is generated as an impurity which cannot be ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: DMS (Dimethylsulfate) is a liquid compound with a high vapor pressure. It is a widely used basic chemical in the production of Agrochemicals, Cosmetics and Pharmaceutics. It is very toxic at ppb- concentrations already, but also carcinogenic and mutagenic. Furthermore by hydrolysis sulfuric acid is formed, so it is very corrosive also. Since there’s no warning effect in terms of irritation and/ or odor, dangerous amounts can be incorporated without realizing. The effects of intoxication, which ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Ethylene oxide is a highly flammable and toxic gas which is the main precursor in the production of Ethylene glycol but also widely used in the medical sterilization. The Ethylene oxide sterilization is applied on medical and pharmaceutical products which cannot resist the high temperature ranges in usual steam sterilization processes. Certain products in the food industry are sterilized in the same way. Ethylene oxide gas penetrates the packaging as well as the product and kills all microorganisms ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Ozone is now widely used for treatment of municipal water because of its greater effectiveness in killing pathogens such as bacteria and their spores and in deactivating viruses. Increasingly, ozone is being used in other industrial applications such as in HVAC systems for removing hydrocarbons and cigarette smoke from buildings, in the sterilization of medical instruments, soil and ground water remediation, preservation of fruits and vegetables during storage, processing of food products, ozone laundries, etc. ...
By2B Technologies based in Boulder, COLORADO (USA)
EyeCSite 2.0 is the industry-leading quantification software, offering a wide range of functionalities that detects, alerts and quantifies emissions in a very simplified and user-friendly interface, without the need for a close contact analyzer. ...
ByOPGAL based in Karmiel, ISRAEL
The action of the micro-organisms on organic and complex inorganic materials, leads to the production of ammonia. When ammonia is present in water at high enough levels, it will have detrimental effects on animal life. For this reasons ammonia in a wastewater plant might be monitored and removed at different points in the process: Inflow of the WWTP - Raw wastewater intake (Using our MS3500). In the aeration lanes. At the outflow of the clarifier. At the works ...
ByMultisensor Systems Ltd. based in Cheadle, UNITED KINGDOM
The automotive industry is a major air pollution contributor and thus one of the most regulated industries in the world. Several gas monitoring techniques are widely used in the automotive industry for measuring vehicle emissions. Typical applications include live on-board exhaust monitoring (CO, CO2, N2O, NOx, formaldehyde, acetaldehyde, oxygen and moisture), analysis of raw and dilute exhaust gas from the engine and tailpipe with gas-bags (CO2, N2O, NOx, CH4, EtOH, THC, H2S, SO2, NH3, formaldehyde and ...
ByGasera Ltd based in Turku, FINLAND
Air pollution causes millions of deaths worldwide and costs the world economy $5 trillion per year. Over 90% of the world’s population lives in places where air quality exceeds World Health Organization’s (WHO) guideline limits. Therefore, air pollution has become a major global challenge in the past years. Human activity and natural processes can both generate air pollution. Typical sources of air pollution are e.g. traffic, energy production, manufacturing and chemical industries, fumes from ...
ByGasera Ltd based in Turku, FINLAND
Each year millions of containers arrive in ports around the globe. Typical international cargo has to travel for a long time in varying temperature and humidity conditions. Even though it may be inspected and considered to be safe prior to leaving its destination, hazardous chemicals and fumigants can off-gas during the transit. The combination of sealed containers and long journey times means that chemicals can build to a level that would never normally be encountered in domestic or industrial settings. In the ...
ByGasera Ltd based in Turku, FINLAND
The Oil & Gas industry is composed of three major components: upstream, midstream and downstream. The upstream industry finds and produces crude oil and natural gas. The midstream industry processes, stores, markets and transports commodities such as crude oil, natural gas and natural gas liquids. The downstream industry includes the oil refineries, petrochemical plants, petroleum product distributors and natural gas distribution companies.All of these operations contain many processes that require monitoring ...
ByControl Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA)
The emission challenge is significant to ETG Risorse e Tecnologia. For years it has been engaged in providing instrumentation and support to authorities and companies operating in the environmental sector. Climate change is a scientifically established reality, as is its anthropogenic origin; emissions of pollutants into the atmosphere are one of its leading causes. Their monitoring - in addition to being mandatory - allows their level to be kept under control. ETG fully supports the Green Deal and the European ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
Air emissions do not only belong to the industrial sector. Transport is subject to equally strict regulations, complicated by the main feature that these vehicles accumulate: crossing national borders. The limits may become stricter depending on the territory you are travelling through, particularly for the marine ...
ByETG Risorse e Tecnologia S.r.l. based in Chivasso (TO), ITALY
Weda designs and develops underwater cleaning equipment for tanks and reservoirs in industries like Nuclear Power stations, glass works, steel works, pulp and paper facilities etc. Weda has delivered and installed cleaners in nuclear power plants, glass factories, fish farms, gypsum plants, pulp and paper mills and several other applications where there is a need for cleaning (sludge removal) without having to drain the water. ...
ByWeda Robotics based in Södertälje, SWEDEN
Weda has supplied underwater cleaners to nuclear plants for more than 40 years. Weda has also been collaborating with Westinghouse since 2008, one of the leading suppliers of equipment for the nuclear industry. Westinghouse is handling the sales to the nuclear industry and you can contact them or us if you want to get more information. In collaboration with Westinghouse Electric AB Weda has developed the robot U-DEC (Underwater Decontamination Unit) for cleaning the walls and the bottom of the reactor basin before ...
ByWeda Robotics based in Södertälje, SWEDEN
Our priority is to offer and maintain an environmentally friendly and sustainable solution for the environment, nature and marine life. A non-invasive cleaning solution (sediment removal) that does not affect the health or environment of the fish is a key priority for sustainable fish farming. Weda´s robots offer this solution without having to empty their tanks and without staff having to stay in the fish's ...
ByWeda Robotics based in Södertälje, SWEDEN
Throughput: 30 to 3,000 ...
ByRuf Maschinenbau GmbH & Co. KG based in Zaisertshofen, GERMANY
ByBuck Scientific Inc based in Ansonia, CONNECTICUT (USA)
For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in ...
ByKörting Hannover AG based in Hannover, GERMANY
ByEOS Remediation - Redox Tech based in Cary, NORTH CAROLINA (USA)