Refine by
Industries served
- Oil, Gas & Refineries
- Water and Wastewater
- Monitoring and Testing
- Environmental
- Food and Beverage
- Pulp & Paper
- Manufacturing, Other
- Electronics and Computers
- Plastics & Resins
- Agriculture
- University / Academia / Research
- Energy
- Mining
- Automobile & Ground Transport
- Defense
- Commercial
- Medical / Health Care
- Metal
- Chemical & Pharmaceuticals
- Waste and Recycling
- Textile
- Air and Climate
- Construction & Construction Materials
Xprt Product Applications In Trinidad
116 applications found
Premium
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facility operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Osmosis is the phenomenon of water molecules passing through a semi-permeable membrane from a region with lower dissolved solids to a region with higher dissolved solids until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
LNI Swissgas provides a large range of innovative gas generators for Gas Chromatography ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
LNI Swissgas is a leading manufacturer of innovative gas generators designed to meet all gas requirements for LC/MS ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
LNI Swissgas supplies gas generators for ICP ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
LNI Swissgas is a leading manufacturer of innovative gas generators designed to meet all gas requirements for LC/MS ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Solar Turbines can help your business with renewable electricity by converting waste to energy. Synthetic gas, or Syngas, consists primarily of hydrogen and carbon monoxide. Syngas is usually the product of gasification of coal, biomass or Municipal Solid Waste ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Companies across the globe are setting carbon reduction goals to reduce GHG emissions. Displacing carbon intensive energy sources with hydrogen reduce the introduction of atmospheric CO2. The products of combustion of oxygen with any hydrocarbon produce CO2 in the reaction while hydrogen combustion only produces water. Increasing demands from many end users such as universities and larger industrial facilities provide further motivation for reducing carbon footprint, but still supplying reliable electricity and ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Off-Gas Energy Recovery With Cogeneration For Refineries and Petrochemical Plants. In today’s world, refineries and petrochemical plants need to become integrated, energy efficient, and sustainable. ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Solar Turbines has unique experience with steel gases with dozens of coke oven gas (COG) fired gas turbines packages in combined cycle or cogeneration plants installed from 2006, reaching more than 2 million operating hours in the first decade. The lessons learned from this experience, relating to the availability and reliability of the COG fleet, eventually validated the technical solution implemented for the Solar COG gas turbines ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Solar Turbines provides sustainable energy solutions to help utility companies and industries around the world find the perfect balance between affordable, flexible, efficient, and reliable power. As global energy demand increases, it is critical that resilient systems are available to ensure our customers have reliable power when needed. As the energy industry continues to evolve around regulatory goals to reduce emissions, energy providers are often met with constraints. To help customers meet sustainability ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
The measurement of pollutants such as O3, NO, NO2, CO, SO2 and HC to ppb’s and ppm’s require very sensitive analysers. Over the time or according regulations and devices requirements, calibration operations are required for each measured compound. As low concentration gas standards are expensive, may be unstable or not storable, like for ozone, on-site reference gas generation with Sonimix calibrators reduce costs, logistics troubles and keep analysers performances at their higher ...
ByLNI Swissgas based in Versoix, SWITZERLAND
Premium
Data centers are the backbone of the digital age, powering the applications, services, and technologies that we rely on every day. As the demand for data centers continue to grow, the need for reliable and sustainable power does as well. Microgrids (sometimes called live wire) and primary power plants can utilize a range of sustainable fuels, including hydrogen, renewable natural gas or biomethane or HVO (Hydrotreated vegetable oil), to provide data centers with the resiliency and sustainability they need to ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Premium
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. Myron L® Company’s portable AGRI-METERS™ provide you with a simple, fast, and accurate means of testing these ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)