Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Energy
- Agriculture
- Construction & Construction Materials
- Environmental
- Food and Beverage
- Metal
- Waste and Recycling
- Mining
- Oil, Gas & Refineries
- Pulp & Paper
- Glassware
- Electronics and Computers
- Chemical & Pharmaceuticals
- Automobile & Ground Transport
- Medical / Health Care
- Commercial
- Aerospace & Air Transport
- University / Academia / Research
- Textile
- Forestry & Wood
- Paint
- Maritime/Shipbuild/Water Transport
- Packaging
- Defense
- Plastics & Resins
- Communications / Telecom / Datacom
- Soil and Groundwater
- Dry Cleaning
- Printing
- Travel & Leisure
- Government
- Health and Safety
- Retail
Xprt Product Applications In Turkey
1,273 applications found
Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM
Our breakthrough nanofiltration membranes enable robust and sustainable drinking water production from polluted surface or well water by removing color, TOC, humic acid, micropollutants, medicine residues, pesticides, PFAS and other pollutants in one single step. Large parts of the world are already in a water stressed situation, exacerbated by climate change. Therefore we need to start thinking about our water supply in different ways, unlocking new sources for drinking water production, such as polluted surface ...
ByNX Filtration based in  Enschede, NETHERLANDS
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in  Vleuten, NETHERLANDS
For over 50 years the semiconductor industry has followed the insight of Moore’s Law to drive continuous innovation in the development of faster, smaller, and more affordable devices that control the electronics we use every ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Phathom sensors are used in industrial processes like mining and pulp and paper plants for turbidity and suspended solids monitoring. Applications include control of optimum solids content in water product mixes, monitoring and control of wastewater influent and discharge, desludging, and filtration monitoring and ...
ByPhathom based in  Pukekohe, NEW ZEALAND
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Servomex has set the standard for gas analysis in the Industrial Gas (IG) market for the last 60 years. From air separation to gas bottling and transportation, we've pioneered monitoring technologies and ground-breaking systems solutions that deliver accurate sensitivity, unparalleled performance and reduced cost of ...
ByServomex - a Spectris Company based in  Sugar Land, TEXAS (USA)
The Only Complete Pharmaceutical Industry Contamination Control Provider. Particle Measuring Systems partners with industry companies as a complete contamination monitoring solutions provider. Starting with our Advisory Services team, then collecting data with our viable and non viable particle counters, thru to complete data management and reporting. We have the expertise to help you meet regulatory requirements including ISO 14644-1:2015 and EU GMP Annex 1 and get your product to ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Particle Measuring Systems (PMS) has the application expertise and particle monitoring instruments with the industry leading sensitivity you need to reduce yield loss. Particle Measuring Systems PMS can provide you with particle monitoring solutions to determine how clean your semiconductor or microelectronics manufacturing is. By continuously counting particles when and where products (water, chemicals, air) are at risk, we provide the global expertise and high-performance laser particle counters you count ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
Protea has deployed FTIR gas analysers in many projects requiring the monitoring of complex mixes of VOCs. In the chemical and pharmaceutical industry, scrubbers and carbon-bed abatement plants are typical installations where the use of Protea FTIR analysers and our chemometric expertise have proved valuable to plant operators. They prove an invaluable tool in process measurements and emissions monitoring. In the laboratory, Protea can deliver instruments with all the chemometric software and support to enable ...
ByProtea Limited based in  Middlewich, UNITED KINGDOM
Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these gases plus moisture, pressure and temperature. The analyser can be configured for single channel operation to monitor any of these gases plus CH4 and ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
There is a requirement for many small boiler operators to monitor Opacity to determine the smoke density emitted from the boiler. On small boilers we recommend the DCEM 1001 Opacity monitor; this simple, low cost monitor has high efficiency air purges use compressed air to ensure that optical surfaces are virtually free of dust or debris contamination. This ensures minimal maintenance is required on the ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM
Specialized industry Solutions for Weather Accuracy and Reliability. RainWise produces the most durable, accurate, and easy-to install professional weather stations on the market. Our solutions are ideally suited for a wide range of industries such as manufacturing, healthcare, safety, and military. The MK-III weather station is specifically designed and built for industrial applications where signals need to travel through significant amounts of RF energy, such as metal roofs and reinforced concrete, or require a ...
ByRainWise Inc. based in  Boothwyn, PENNSYLVANIA (USA)
Our laser profile measurement systems are used for non-contact scanning of the refractory lining in metallurgic reaction and transport vessels, like converters, EAFs, torpedo ladles and steel casting ladles, as well as in open die forging shops. The measurement values detected by laser scanners permit early and effective patching of defective locations and increase the lifetime of the refractory lining. Refractory costs are reduced at the same time operating safety is increased. The product assortment ranges from ...
ByCETCO based in  New York, NEW YORK (USA)