Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Energy
- Agriculture
- Construction & Construction Materials
- Environmental
- Food and Beverage
- Metal
- Waste and Recycling
- Mining
- Oil, Gas & Refineries
- Pulp & Paper
- Glassware
- Electronics and Computers
- Automobile & Ground Transport
- Chemical & Pharmaceuticals
- Commercial
- Medical / Health Care
- Aerospace & Air Transport
- University / Academia / Research
- Textile
- Forestry & Wood
- Packaging
- Paint
- Maritime/Shipbuild/Water Transport
- Defense
- Plastics & Resins
- Communications / Telecom / Datacom
- Soil and Groundwater
- Dry Cleaning
- Printing
- Travel & Leisure
- Government
- Retail
- Health and Safety
Xprt Product Applications In Turkey
1,273 applications found
ZYGO can extend its capabilities to enable sub-pixel 2D metrology from the same data used to report 3D metrology results. Users have the choice of using either height or intensity data to make these lateral measurements. Parameters such as line and space widths, hole dimensions, and feature to feature relationships are possible. ZYGO’s 2D metrology solutions are not only used for lateral dimensions, but also enable production and automation environments. 2D metrology can be used to identify features for part ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
An important property of an optical component is the variation of the refractive index of the material from which it is made, broadly referred to as homogeneity. Material inhomogeneity causes variation of the refractive index in a glass, which can be in the form of sharp, cord-like regions called striae or it can occur as a gradient of the refractive index through a larger region of the sample. Material index variations must be qualified to ensure their impact is within tolerance for a particular optical design ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Measuring volumetric properties of a surface is most often used in wear analysis of lubricated surface but has uses in many other applications such as adhesion, porosity, and particle ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Commercial companies entering the Commercial Space market are significantly driving down their launch costs in an effort to put hundreds and even thousands of satellites into orbit. ZYGO supports this market by quickly providing low-weight, athermal, and rugged optical assemblies capable of performing in the harsh space environment – at the right ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Serving the needs of the Military and Aerospace industry requires a high level of quality and commitment. With mission-critical programs and applications, failure is not an option. Success demands the highest standard of precision, reliability, and quality, enabled with close ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Alloy analysis is the process of identification of the chemical composition of the sample. Opposite to PMI (Positive Material Identification), where the alloy grade is determined, it shows the material's whole element composition. The analysis can be carried out by an x-ray fluorescence (XRF) alloy tester, and it is widely used in a variety of industries: from aero-space testing to welding and scrap ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
End-of-life mattresses are notoriously difficult to move, store and process, which means they’re widely considered a huge headache for the resource sector. Some operators would even go so far as to presume they’re economically unshreddable. Until now… As UNTHA’s innovation has continued, so too have the possibilities when it comes to mattress shredding. We want to put a stop to the 167,000 tonnes of mattresses – that’s 7.5 million units – sent to landfill in the UK, ...
ByUntha Shredding Technology Gmbh based in  Kuchl, AUSTRIA
Accurate qualification of optical components is a vital source of feedback to an optical manufacturing operation. From plano to spherical to aspheric shapes, common measurements include surface form error, waviness and roughness. Depending on the type of part and its application, material and geometric properties such as transmitted wavefront, homogeneity, wedge, parallelism, thickness variation, and radius of curvature may also require careful control. Optical components are the building blocks of optical ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
The measurement of surface texture can be critical to ensuring optimal performance in an imaging system. Standard aspheric surface fabrication techniques including, diamond turning and sub-aperture polishing, can leave traces of the cutting process on the final product. Issues with surface texture on a lens can lead to a lack of image uniformity, scattered light, and even diffraction in the final image. Zygo 3D systems can quickly detect surface texture issues using full area, high resolution optical ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Micro lens arrays are integral to a variety of applications, including displays, sensors, and other photonic systems. Key metrics of micro lens arrays include the radius of curvature, diameter, and ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Innovative technology enables form measurement of both front and back surfaces of thin optics, ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Additive manufacturing (AM) is a relatively new and growing technique which is complimentary to more conventional, subtractive methods like machining. The major advantage of AM is that it allows the manufacturing of complex geometries and the creation of internal features that cannot be easily produced using subtractive methods. One major disadvantage of AM, however, is the reduced control of surface quality and dimensional ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
For the current population of adults 40 or older, the suffering from bone degeneration is approaching 90% (Nag and Banerjee, 2012), predominantly with site-specific damage such as hip and shoulder ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Rapid innovation in the smart phone market requires increasingly precise metrology to enable production ramps. ZYGO’s metrology solutions are used on every piece of a modern smart phone at every stage of the supply chain. From cover glass to circuit boards and lens modules to microphones, ZYGO is enabling smart phone manufacturers and their supply chain ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
In synchrotron applications, deformable mirrors focus x-ray beams coming in at grazing incidence and are therefore longer narrow ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
With over 30 years of experience, ZYGO's nano-position sensing products have become one of the most trusted, delivering continuous operation with exceptional performance. ZYGO is a market leader in displacement sensors providing feedback for closed loop servo control on an OEM basis. Semiconductor and flat panel manufacturing and process control tools in production today rely on ZYGO sensors to provide the precision and reliability needed for high volume manufacturing ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
In addition to these core products, Halbes stands out with its innovative hydrogen-based water heating systems. Utilizing hydrogen as a clean energy source, these systems offer an environmentally friendly alternative to traditional water heating methods. Halbes also excels in the production of heat pumps, which provide efficient heating and cooling solutions, significantly lowering energy consumption and environmental ...
ByHalbes based in  Malikoy/Sincan, TURKEY
Biofilm research is on-going as laboratories in multiple disciplines from life science to industrial processing search for answers on colony structure, resistance to antibiotics and chemicals, how they are secured to the surface via a biopolymer-rich matrix, and their ability to survive rigorous environmental stressors. Efforts to prevent their initial formation are part of this search as ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
Safety, reliability and performance are built into millions of individual aircraft components. Compliance to stringent design specifications is routine and required, making precise metrology tools a non-negotiable necessity in ...
ByZygo Corporation - AMETEK, Inc based in  Middlefield, CONNECTICUT (USA)
One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water ...
ByPollution & Process Monitoring Ltd based in  Sevenoaks, UNITED KINGDOM