Refine by
Industries served
- Manufacturing, Other
- Monitoring and Testing
- Water and Wastewater
- Air and Climate
- Energy
- Agriculture
- Construction & Construction Materials
- Environmental
- Food and Beverage
- Metal
- Waste and Recycling
- Mining
- Oil, Gas & Refineries
- Pulp & Paper
- Glassware
- Electronics and Computers
- Automobile & Ground Transport
- Chemical & Pharmaceuticals
- Commercial
- Medical / Health Care
- Aerospace & Air Transport
- University / Academia / Research
- Textile
- Forestry & Wood
- Packaging
- Paint
- Maritime/Shipbuild/Water Transport
- Defense
- Plastics & Resins
- Communications / Telecom / Datacom
- Soil and Groundwater
- Dry Cleaning
- Printing
- Travel & Leisure
- Government
- Retail
- Health and Safety
Xprt Product Applications In Turkey
1,273 applications found
It is time to reconsider the high costs of purchasing chemicals like Sodium Hypochlorite, Calcium Hypochlorite, Chlorine Dioxide, Hydrogen Peroxide, Cocktail Biocides and etc. Switching from chemicals to HypoX® will bring multi-times of profit per day and this will pay back your HypoX® investment much quicker than you can imagine. Contact us to make the feasibility report for your “Switch to HypoX®” project. HypoX® provides %50 operational cost savings compared to gas ...
ByKemisan based in Güzelbahçe/İzmir, TURKEY
Operational and storage risks should not be underestimated especially if there is a life-threatening chemical called Gas Chlorine. Other chemicals, like potassium permanganate, potassium sulfate, polyelectrolyte, poly aluminum sulfate, iron(3), lime, caustic also can be a threat to human health. The worldwide well-known danger of chlorine gas does not only increase the risks but also costs a lot to cover the risks. On the other, HypoX® is out of risk regulations with lower than 1% concentration but ironically ...
ByKemisan based in Güzelbahçe/İzmir, TURKEY
Switching to HypoX® from Sodium Hypochlorite(NaOCl) means a lot for your operational budgets because the operation cost (Salt + Electricity) of HypoX® Generators are many times lower than purchasing NaOCl. Mass volume in transportation and handling of NaOCl is also eliminating by switching to HypoX®. Additional biocide consumptions in some applications due to low disinfection activity of NaOCl also eliminating after switching to ...
ByKemisan based in Güzelbahçe/İzmir, TURKEY
Chlorine Dioxide(ClO2) is a strong disinfectant that active in many pathogens but also carrying disadvantages such as safety risks and high chemical costs. Onsite production of Chlorine Dioxide can be highly explosive in some control failures so, Switching to HypoX® from ClO2 means to have an advance disinfection performance with no safety risks and much more economical operation. ...
ByKemisan based in Güzelbahçe/İzmir, TURKEY
Refused-derived fuel (RDF) is a form of municipal solid waste (MSW) that has been treated in order to burn more efficiently. Solid recovered fuel (SRF) is waste derived fuel that meet a higher quality specification than ...
ByPresona AB based in Tomelilla, SWEDEN
Back in the 1980’s civil engineers were among the first to adapt Operational Modal Analysis (OMA) for testing of large structures. The size of the civil engineering structures and the fact that ambient excitation typically is uncontrollable pushed the development of OMA techniques heavily in this area. Today OMA is a wide spread technology used in many engineering field but testing of civil engineering structures is still the most popular OMA application. Back in 1999, ARTeMIS software was originally ...
ByStructural Vibration Solutions A/S based in Aalborg East, DENMARK
The Global Leader in Handling and Treating Complex Water and Fluid Challenges. The Energy Services segment has, for decades, been the recognized leader in serving two major markets: Oil & Gas and Industrial Wastewater, providing innovative products, services and solutions, and handling and treating COMPLEX water and fluid challenges, cost effectively for their customers worldwide in 14 locations and 10 ...
ByCETCO based in New York, NEW YORK (USA)
Since 1963, more than one billion square feet of CETCO waterproofing products have been installed around the world, becoming the standard by which all other waterproofing membranes are measured. By specifying CETCO products, you are assured of optimum waterproofing performance from products specifically engineered to be integrated and installed as a complete waterproofing system. CETCO manufactures a complete line of quality waterproofing membranes, waterstops, and drainage composites as well as a complete line of ...
ByCETCO based in New York, NEW YORK (USA)
Pyroid Pyrolytic Graphite for Closed Die Forging. Sophisticated forging operations are constantly striving for nearer-net-shape forgings that reduce the amount of material necessary to produce a part as well as to reduce any subsequent machining required to get the part to the final form. A reduction in machining requirements reduces materials waste and improves throughput. Most forge operations perform optimally when both die and piece are the same temperature throughout the forging process. Best operations occur ...
ByCETCO based in New York, NEW YORK (USA)
The entire chemical, petrochemical and pharmaceutical industry produces huge amounts of liquid residues that can be thermally recycled. In response to the principle of zero waste emission, these are increasingly being converted into thermal energy directly where they are produced. This is usually done in adiabatic combustion chamber systems with subsequent waste heat utilisation. Industrial parks also have special hazardous waste incineration plants, operated by globally active waste management companies, in which ...
ByCS Combustion Solutions GmbH based in Wien, AUSTRIA
Carbolite Gero offers enhanced furnaces and ovens for the increasing demands of materials science departments in universities and research institutes. Accurate temperature control, combined with secure data-logging, is often an essential requirement of research work in academia, industry and pharmaceutical markets. Carbolite Gero’s complete range of ovens, chamber and tube furnaces are available with secure data-logging with remote connectivity over Ethernet or other industry standard communication ...
ByCarbolite A Verder Company based in Hope, UNITED KINGDOM
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Scrap metal identification and sorting are some of the most important tasks in recycling. The analysis might take days if not months, depending on the pile. But if you have a handheld XRF for scrap metal sorting, speed and efficiency are ...
ByElvatech Ltd. based in Kyiv, UKRAINE
Managers in mining industry are under pressure to optimize maintenance, workforce, reduce costs, and establish a safe working environment. Litum can help monitor usage of every equipment, location and movement of employees, and create analytics help improve workflows and ...
ByLitum IoT - a Subsidiary of the Litum Group based in Alsancak, TURKEY
Industry challenge. Surface technology optimises parts and tools to meet specific requirements. Processes used in surface technology: Chemical pre-treatment of surfaces, e.g. cleaning, degreasing, etching. Mechanical surface treatment, e.g. grinding, polishing. Surface coating, e.g. painting, powder coating. Water is an essential ingredient in many of these processes, for example in pre-treatment. As a consequence, water can contain a wide variety of substances after completion of the respective ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Industry challenge: Energy generation, energy storage, energy use and energy transport are the main technology issues in the energy industry. This is also true for nuclear power plants. Producers want to achieve high yields of usable energy in the most efficient, economical and environmentally friendly ways. In many applications, in the production of individual components as well as in energy generation itself, water is an instrumental ingredient. In silicon processing, wastewater can contain a wide variety of ...
ByKMU LOFT Cleanwater GmbH based in Hausen, GERMANY
Dürr Universal is a global leader in the design, manufacture and installation of gas turbine silencers and gas turbine filter systems. Dürr Universal provides inlet silencers and exhaust stack silencer solutions for gas turbines and diesel engines used for stationary and portable power generation ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Due to its superior filtration and self-cleaning ability, the Coanda screen is widely utilized in the industry. By filtering the water to perfection, it ensures that it is safe for human consumption. Particles and sludge make the water dirty all of the time. To purify the water, these particles must be filtered. Filtration should be done to prevent even the tiniest particles from getting into the drinking water. Even the tiniest particles are easily separated from the water by the Coanda screen. Furthermore, ...
ByCoanda Water Intakes - ADENCO part of ADEN-GROUP Company based in Kamloops, BRITISH COLUMBIA (CANADA)
Phathom sensors can be used in a wide range of agricultural settings, including horticulture, livestock farming and crop farming. Applications include monitoring turbidity and suspended solids in wastewater and service water at influent and discharge, and monitoring stormwater sediment ...
ByPhathom based in Pukekohe, NEW ZEALAND
Workplace noise monitoring for occupational noise is one of the most overlooked risks in the workplace. Ignoring this hazard can result in fines or prosecution from organisations like the HSE in the ...
ByCirrus Research plc based in Hunmanby, UNITED KINGDOM