- Home
- united kingdom
- Applications
Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Medical / Health Care
- Agriculture
- Energy
- Construction & Construction Materials
- Environmental
- Air and Climate
- Mining
- Automobile & Ground Transport
- Waste and Recycling
- Pulp & Paper
- Metal
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Health and Safety
- Soil and Groundwater
- Electronics and Computers
- University / Academia / Research
- Commercial
- Glassware
- Government
- Defense
- Plastics & Resins
- Paint
- Packaging
- Maritime/Shipbuild/Water Transport
- Travel & Leisure
- Printing
- Communications / Telecom / Datacom
- Textile
- Forestry & Wood
- Retail
- Logistics
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Domestic
Xprt Product Applications In United Kingdom
4,212 applications found
Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling ...
ByNLB Corporation based in Wixom, MICHIGAN (USA)
High quality, reliable observation and monitoring of remote and inhospitable environments via our ATEX and IECEx certified digital IP cameras. Within the oil and gas industries there are many hazardous processes, often in very remote locations and inhospitable environments. This is where our explosion-proof ATEX and IECEx-certified cameras come into their own as they facilitate observation and monitoring, removing the need for personnel to be on-site. Our ATEX and IECEx cameras are compliant with international ...
BySeSys Limited based in Petersfield, UNITED KINGDOM
Karst structures: Solution processes are a common phenomenon in limestones and dolomites which can lead to karstification causing in many cases cavities. They can be air-filled or filled with fine-grained material, which decrease the soil stiffness and thus the load capacity. Exploratory drillings, which are generally used for soil investigations, provide only local information about the subsoil conditions and are not suitable to detect small-scaled structures in a geologically heterogeneous environment. ...
ByGeotomographie GmbH based in Neuwied, GERMANY
GasClam enables continuous monitoring of active and non-active coal seam gas (coal bed methane) and shale gas ...
BySalamander Group based in Ulverston, UNITED KINGDOM
Located miles off the coastline, offshore platforms are huge steel structures equipped with the resources to drill wells and extract oil and natural gas from the ocean floor. Offshore platforms may be floating or fixed, and they contain facilities to store and process oil and gas, as well as pipeline systems that connect the wells to these storage and processing components. Offshore platforms are continuously threatened by corrosive forces. The rate of corrosion in marine environments can be accelerated by ...
ByMobiltex Data Ltd. based in Calgary, ALBERTA (CANADA)
Scaling in Paper Mills caused by hard water is an expensive and difficult problem. Vacuum Pumps, Sprays and heat exchangers all suffer from this phenomenon. Fluid Dynamics MagCAT has a non chemical proven method of preventing scaling Clients include Kimberly Clark, Alier Paper, ...
ByFluid Dynamics International Ltd based in Crossways, UNITED KINGDOM
ByFluid Dynamics International Ltd based in Crossways, UNITED KINGDOM
ByFluid Dynamics International Ltd based in Crossways, UNITED KINGDOM
ByFluid Dynamics International Ltd based in Crossways, UNITED KINGDOM
ByFluid Dynamics International Ltd based in Crossways, UNITED KINGDOM
Problem: Removing rust, scale and coatings with grit blasting requires containment and/or clean-up, and those costs can have a significant impact on profitability. For contractors doing environmental remediation – removing asbestos or lead paint, for example – the containment issue is even more ...
ByNLB Corporation based in Wixom, MICHIGAN (USA)
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Chemical resistant dosing pumps; Verderflex tube pumps provide precision pumping and dispensing solutions for the pharmaceutical industry. The pumps range from being manually operated to versatile units with sophisticated dosing programs. Capable of speed, accuracy and the easy to use pump range are perfect for dispensing delicate, viscous, corrosive, shear sensitive or abrasive fluids. Dispensing flows from a few ml/min up to 17 l/min* Dosing accuracy of ...
ByVerder Liquids BV - part of the Verder Group based in Vleuten, NETHERLANDS
Natural oil and gas extracted from shale rock formations has become one of the fastest-growing oil and gas sectors worldwide. Using a process known as hydraulic fracturing or 'fracking' , the process requires large volumes of clean, sterile water to be injected into the shale formation to release the gas trapped between the ...
Byatg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM
Cooling towers are used widely in the industry for cooling down a process, there exist many version or types of cooling towers, and each designed with its advantages for the process. The generic term "cooling tower" is used to describe both direct (open circuit) and indirect (closed circuit) heat rejection equipment. While most think of a "cooling tower" as an open direct contact heat rejection device, the indirect cooling tower, sometimes referred to as a "closed circuit cooling tower" is nonetheless also a ...
ByDanish Clean Water A/S based in Sønderborg, DENMARK
Obtaining optimum effectiveness from Physical Water Conditioning (pwc) requires knowledge and experience as a number of factors need to be addressed. Simply putting a treatment unit on the incoming or rising main may well give acceptable results in a small domestic dwelling but is likely to lead to customer dissatisfaction for any larger ...
ByEnvironmental Treatment Concepts Ltd (ETC) based in Knowle, UNITED KINGDOM
Approximately 70% of buildings in the UK are sited in hard water areas. This means that there are high levels of calcium bicarbonate present in the water used for drinking, washing heating and cooling. When the water is heated, calcium carbonate attaches to the nearest surface causing scale build-up, ...
ByEnvironmental Treatment Concepts Ltd (ETC) based in Knowle, UNITED KINGDOM
Most industrial companies use significant volumes of cooling and/or hot water in their facility. In 70% of the UK, it is often difficult or expensive to maintain efficient heat exchanger performance. Chemical treatment is both expensive and potentially ecologically damaging and has a negative impact on ...
ByEnvironmental Treatment Concepts Ltd (ETC) based in Knowle, UNITED KINGDOM
Prevention is far better than cure! Unless water treatment is applied in new buildings, energy costs will continue to rise and premature replacement of hot water generators will result. Despite it being a requirement in the Building Regulations, it is seldom even ...
ByEnvironmental Treatment Concepts Ltd (ETC) based in Knowle, UNITED KINGDOM
Boilers and heat exchangers are notoriously susceptible to deposit formation due to a variety of impurities in water. Kurita America’s integrated boiler water solutions are designed to maintain both steam purity and steam quality by eliminating insulating scale and fouling deposits in boilers, associated heat exchangers, and condensate. We take into account the requirements and design of each system. Our programs are engineered to prevent scale on heat transfer surfaces and to minimize corrosion in the ...
ByKurita America Inc. based in Minneapolis, MINNESOTA (USA)