- Home
- united kingdom
- Applications
Refine by
Industries served
- Water and Wastewater
- Manufacturing, Other
- Monitoring and Testing
- Oil, Gas & Refineries
- Food and Beverage
- Medical / Health Care
- Agriculture
- Energy
- Construction & Construction Materials
- Environmental
- Air and Climate
- Mining
- Automobile & Ground Transport
- Waste and Recycling
- Pulp & Paper
- Metal
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Health and Safety
- Soil and Groundwater
- Electronics and Computers
- University / Academia / Research
- Commercial
- Glassware
- Government
- Defense
- Plastics & Resins
- Paint
- Packaging
- Maritime/Shipbuild/Water Transport
- Travel & Leisure
- Printing
- Communications / Telecom / Datacom
- Textile
- Forestry & Wood
- Retail
- Logistics
- Banking & Finance / Insurance / Legal
- Dry Cleaning
- Household Appliances
- Domestic
Xprt Product Applications In United Kingdom
4,212 applications found
Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as hoses, O-rings, seals, grommets, plugs and more. The slip resistance of these parts makes assembly difficult. P-80® temporary rubber assembly lubricants significantly reduce friction helping these parts slide easily into ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
P-80 Lubricants provide a safe and easy way to improve automotive assembly operations. Rubber’s non-slip quality can make an assembly process very difficult. Without an assembly aid, tight-fitting rubber components can cause production to slow down, and quality and safety standards to slip. The P-80 line is specially formulated to provide temporary lubrication that makes rubber easy to install, remove, or otherwise ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
The bus transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
The boat, marine engine and accessory industry relies heavily on natural and synthetic rubber for various purposes including engines, propeller hubs, pumps, hoses, seals, O-rings and grommets. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve assembly operations of rubber and soft plastic ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
The transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, grips, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
P-80 Lubricants are the perfect solution for pump and seal repairs. They have been used for years by pump manufacturers, HVAC companies, pool & spa manufacturers, treatment plant operators and maintenance professionals to maintain equipment and replace parts such as seals, O-rings, hoses, grommets, and ...
ByInternational Products Corporation based in Burlington, NEW JERSEY (USA)
Waste to Energy is a form of energy recovery through anaerobic digestion. Anaerobic digestion is a series of biological processes in which microorganisms break down biodegradable material (biomass or waste feedstock) in the absence of oxygen. One of the end products is biogas, which is combusted to generate electricity and heat, or can be processed into renewable natural gas and transportation ...
ByJWC Environmental based in Santa Ana, CALIFORNIA (USA)
Substrate or biogas substrate refers to the raw material which is used to create biogas in a biogas plant. Biomass with a heavy water content which cannot be subjected directly to thermal treatment is particularly suitable as a substrate. Biomass that is rich in cellulose (e.g. straw) and lignocellulose (wood) is poorly accessible to microbial degradation and therefore unsuitable as a substrate for biogas generation without prior decomposition of the cellulose, e.g., with a shredder. ...
ByJ Willibald GmbH based in Wald-Sentenhart, GERMANY
Test Setup: A series of dilutions consisting of 50, 75, 100, 125, 150, and 175 mL of test wastewater were added to respective 500 mL respirometer flasks along with nutrients, minerals, and buffers. TCMP was added to eliminate interference from nitrification. Oxygen uptake was measured over a five-day test period using a CHALLENGE AER-200 ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
Method: An industry was discharging wastewater to a municipal sewer and was suspected of causing problems with treatment at the plant. Samples of the industrial wastewater were collected and oxygen uptake for four dilutions was measured using a CHALLENGE AER-200 aerobic/anaerobic respirometer system. Biodegradation kinetic coefficients were determined using the method described by Dang, et. al. (Res. J. of Water Poll. Control Fed., p. 1711, 1989). Results of the oxygen uptake measurements and kinetic analyses are ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
A pharmaceutical company was interested in knowing whether a specific component, MCB, inhibited the biodegradation of other wastewater constituents. A series of respirometer tests was set up using identical mixtures of wastewater and return activated sludge (RAS) plus varying amounts of MCB. The OUR fingerprint of this wastewater includes a first peak of about 500 mg/L-hr within the first hour of contact that represents the oxidation of highly-biodegradable organic constituents. A second group of readily ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
A pulp mill was interested in evaluating the impact of increasing organic loading rates on the performance of their activated sludge ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
Test Setup: 40 and 60 mL of wastewater were added to individual respirometer flasks each containing nutrient/mineral/buffer medium to form two different dilutions. TCMP was added to inhibit nitrification. 25 mL of seed from a laboratory scale reactor was added to each test reactor. Oxygen uptake was monitored using a CHALLENGE AER-200 respirometer for five days. A second dose of 40 and 60 mL of leachate sample was then added to each reactor and oxygen uptake was measured for another 5 ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
OUR measurements were made for two waste streams from a chemical production plant. The fingerprint for Waste 1 indicated the presence of three major groups of organic constituents. The first group of readily biodegradable organic constituents is oxidized at maximum kinetic rate through about one hour of contact. Oxidation of a second group of constituents causes the OUR to increase through about 3.5 hours of incubation. This increase in OUR is caused by growth of microorganisms during the oxidation reaction. ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
The composition of wastewater from chemical plants varies widely. Sustainable treatments of effluent streams produced by chemical and petroleum industries are typically problematic, due to the complex compositions of pollutants, low biodegradability, and toxic matters. Nowadays, high salinity (5–25% chloride and/or sulphate) represents a major challenge in the biological treatment of chemical and petroleum wastewater. High salinity levels can render traditional biological and chemical treatment technologies ...
ByWoxford Environmental Technologies (UK) Ltd. based in Headington, UNITED KINGDOM
Developing a sustainable approach to the disposal of textile and dyeing wastewater is a fundamental industry challenge. Textile effluents contain various chemicals used in the production process and material pollutants, such as fibre, protein and other soluble organic pollutants. Higher costs are associated with the decomposition of any dye remaining in the effluent, due to the large size of dye molecules and their low biodegradability. ...
ByWoxford Environmental Technologies (UK) Ltd. based in Headington, UNITED KINGDOM
Identifying different types of plastic to ensure efficient waste management is one tactic for reducing plastic pollution in our environment. In this application note, we discuss how the ATR-FTIR Spectroscopy using the IR5 can identify plastics for rapid ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Biodiesel is an advanced biofuel that is renewable and biodegradable. It is a cleaner-burning, drop-in replacement to petroleum diesel fuel and can be used in vehicles and heating systems. Biodiesel is primarily produced from animal fats, edible oil, UCO (Used cooking oil) and non-edible crude vegetable oil. Amafilter® have designed biodiesel filtration processes that deliver optimal efficiencies to biodiesel plants around the world, working closely with customers to design processes that meet their specific ...
ByAmafilter® based in Lochem, NETHERLANDS
World-leading global solutions. Miniaturising X-ray tubes through our patented NEX Technology allows us to introduce new solutions in medical X-ray that are smaller, lighter and reliable. Micro-X has proven technology, with mobile X-ray in use globally in hospitals, sports rooms, mobile clinics and military deployable hospitals. Using a curved array of multiple mini X-ray tubes, Micro-X is creating a mobile Head CT for the detection of stroke, with future possibilities for the development of full body ...
ByMicro-X Limited based in Tonsley, AUSTRALIA