Refine by
Industries served
- Manufacturing, Other
- Air and Climate
- Energy
- Agriculture
- Water and Wastewater
- Oil, Gas & Refineries
- Glassware
- Mining
- Construction & Construction Materials
- Monitoring and Testing
- Food and Beverage
- Chemical & Pharmaceuticals
- Metal
- Pulp & Paper
- Plastics & Resins
- Forestry & Wood
- Waste and Recycling
- Environmental
- Automobile & Ground Transport
- Aerospace & Air Transport
- Medical / Health Care
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Textile
- Soil and Groundwater
- University / Academia / Research
- Packaging
Xprt Product Applications In Uruguay
346 applications found
Premium
Manufacturing processes for medical devices requiring precise heating. Medical devices are highly specialised, and their construction must often adhere to strict criteria. Accurate temperature control is essential in the production of many medical devices to ensure correct ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Non-woven materials production (e.g., textiles, fabrics). Non-woven fabrics are laminated by chemical, mechanical, solvent or hot glues. These often require precise temperature measurements to ensure an efficient process and high-quality ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Plastics manufacturing processes (e.g., extrusion, thermoforming). The manufacture of plastic products relies on correct heating of the polymer before it is shaped into the desired profile. This requires accurate, high-resolution temperature measurements to support consistent product ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Wood product manufacturing processes (drying, etc.). The standard of wood products is affected by moisture content. These products, when dried, may also be prone to combustion. Thermal monitoring helps protect against fires and supports quality ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Industrial fire detection/prevention processes. Thermal imaging plays a critical role in fire prevention for both pile storage (the outdoor or indoor storage of bulk materials such as coal, wood chips, or other combustible materials) and battery storage environments by providing early detection of potential fire ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Cold rolling stage for strip thickness reduction. Temperature sensitive cold rolling operations are accurately measured with AMETEK Land’s non-contact spot pyrometers. Selected waveband designs provide the highest accuracy readings with immunity from emissivity ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Glass for buildings; flat glass manufacturing. Architectural glass is used as a building material, typically for windows, furniture or internal partitions. It often needs to be tempered or laminated to ensure safety, or bent to fit application ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
OPSIS offers flexible monitoring of particles in the ambient air, both for determining the concentrations in real time and through collection on filters that are also preserved and can be used to determine the composition of the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Thermal treatment (e.g., annealing, tempering) of materials. Heat treating metals to enhance their metallurgical qualities necessitates high accuracy temperature measurement and control. In many of these processes contact temperature devices cannot be used. AMETEK Land provides accurate Non-contact solutions tailored to these ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Cement manufacturing (kiln processes) production. Cement is manufactured through a closely-controlled chemical combination of calcium, silicon, aluminium, iron and other ingredients. Temperature monitoring at key stages is essential to providing this close ...
ByLAND® based in Dronfield, UNITED KINGDOM
Premium
Process monitoring and monitoring of emissions from aluminium smelters can be a challenge due to high concentrations of for example hydrogen fluoride (HF) and dust. The use of sampling systems in such environments requires a lot of maintenance and is therefore costly. Such systems can also be unreliable. OPSIS offers better ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Gas analysis in brick manufacturing: Process control and emissions monitoring at brick plants can be challenging due to high concentrations of hydrogen fluoride (HF) and dust. The use of extractive monitoring systems in such environments requires a lot of maintenance and can still cause major operational disruptions. However, the contactless technology offered by OPSIS solves the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Demanding monitoring environment at cement industries. Process control and emissions monitoring at a cement plant can be a challenge due to high dust levels and corrosive gases. OPSIS offers gas analysis systems that can handle these environments and that have high accuracy, short response times, and long maintenance ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. The use of extractive systems in such environments requires a lot of ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
A challenging environment for monitoring instruments. Process control and emissions monitoring at a fertilizer plant can be difficult due to aggressive process gases in high concentrations, sometimes at high temperatures and pressures. Use of extractive monitoring systems in such an environment requires a lot of maintenance and the instruments are prone to malfunction. However, unlike extractive systems, OPSIS non-contact monitoring technology has no problem handling these ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
ByOPSIS AB based in Furulund, SWEDEN
Premium
Challenging conditions for gas analysis at waste-to-energy facilities. Process and emissions monitoring at waste-to-energy plants or plain waste incineration plants can be a challenge. A large number of gas components need to be monitored with high accuracy. The flue gas is often aggressive and has high dust and moisture content. Close to 100% uptime is required, the monitoring system must be easy to maintain, and it must be able to be calibrated quickly. The OPSIS monitoring system handles all these challenges ...
ByOPSIS AB based in Furulund, SWEDEN