- Home
- usa colorado
- Applications
Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Manufacturing, Other
- Air and Climate
- Mining
- Oil, Gas & Refineries
- Food and Beverage
- Environmental
- Energy
- Medical / Health Care
- Construction & Construction Materials
- Soil and Groundwater
- Metal
- Pulp & Paper
- Aerospace & Air Transport
- Agriculture
- Electronics and Computers
- University / Academia / Research
- Plastics & Resins
- Health and Safety
- Waste and Recycling
- Chemical & Pharmaceuticals
- Forestry & Wood
- Glassware
- Government
- Maritime/Shipbuild/Water Transport
- Automobile & Ground Transport
- Defense
- Paint
- Textile
- Dry Cleaning
- Printing
- Furniture
- Packaging
- Commercial
Xprt Product Applications In Colorado
823 applications found
Our instruments are capable of detecting VOC at low levels and can log data with ease. They can also be used with incredibly humid soil samples so the effects of moisture are massively reduced. Once logged, the data can be extracted at a later date which can then be built into a report. Producing a report has never been easier with our intuitive data management software ...
ByION Science Ltd. based in  Royston, UNITED KINGDOM
Paper manufacturing involves many chemical processes that drive the emission of nitrogen dioxide (NO2), sulfur dioxide (SO2), and carbon dioxide (CO2). Nitrogen dioxide and sulfur dioxide are major contributors of acid rain, whereas CO2 is a greenhouse gas responsible for climate change. In addition, wastewater discharge for pulp and paper mills often contains alcohols, chelating agents, and inorganic materials like chlorates and transition metal compounds. Furthermore, chlorine and compounds of chlorine are used ...
ByCECO Environmental based in  Addison, TEXAS (USA)
Hydraulic fracturing ("fracking") as a method to stimulate shallow, hard rock oil wells began in the 1860s. It was used in Pennsylvania, New York, Kentucky, and West Virginia. Initial efforts used explosive nitroglycerin in oil, water, and gas wells. Nonexplosive acid for well stimulation was introduced in the 1930s. Acid etching prevented fractures from closing completely, enhancing recovery. The same phenomenon was later discovered with water ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)
Keep costs down and product quality high with proven temperature and gas sensing solutions. Advanced Energy knows how to build products for custom applications used in industrial markets. Thanks to decades of experience, our proven temperature and gas sensing products easily meet stringent design requirements. Products with demanding production processes (e.g. polyethylene plastic and asphalt) require temperature management and accuracy throughout their production cycles. Our products can help you ensure product ...
ByAdvanced Energy Industries, Inc. based in  Denver, COLORADO (USA)
Providing you with a complete environmental monitoring solution. In this new era of smarter food safety, regional and local food and beverage manufacturing GMP regulations can be an asset to your business and products. Trust your contamination control monitoring and prevention to Particle Measuring Systems. We have been successfully controlling microbial and particulate contamination in critical regulated manufacturing environments worldwide for over 45 ...
ByParticle Measuring Systems (PMS) based in  Niwot, COLORADO (USA)
The adaptability, flexibility, and ultra-thin profile of Ascent Solar’s modules make it easy to directly integrate solar power into an unlimited number of consumer electronic products. Ascent Solar’s transformational technology enables the seamless integration of solar power with any device. Ascent’s best-in-class lightweight, flexible solar modules provide power on the go, and allow consumers to use devices free from the constraints of the ...
ByAscent Solar Technologies, Inc. based in  Thornton, COLORADO (USA)
Industrial water use accounts for between 20-30% of total water consumption in the U.S. as water plays an important role in many industrial processes. Manufacturing companies utilize water in the production of their products and create wastewater from cleaning equipment or the facility or as a byproduct of the manufacturing process itself. This process and produced water needs to be treated before it is used in manufacturing or sent to the municipal waste water system. For example, food processing companies wash ...
BySymbios Technologies LLC. based in  Fort Collins, COLORADO (USA)
Anchor Reinforced Vegetated Systems (ARVS) installations are used to protect ground from erosion and add stability to the soil base using a combination of erosion control mats, ground anchors, and vegetation. This unique approach to soil stabilization can be used for slope stability, channel linings, shorelines, and other areas affected by extreme hydraulics or high-load ...
ByNorth American Green based in  Poseyville, INDIANA (USA)
North American Green’s Erosion Control Systems have proven solutions for your scour protection needs. Pipe outlets, channel bottoms and shoreline transition areas all present unique scour protection and soil stabilization challenges. That is why project designers prefer the aesthetics and safety offered by our flexible revetment mats - especially our ShoreMax Transition ...
ByNorth American Green based in  Poseyville, INDIANA (USA)
Over the past few years there has been an enormous surge in interest in the application of low-cost sensors to measurements of air pollutants by educators, citizen scientists and members of various groups interested in air pollution levels in their own ...
By2B Technologies based in  Boulder, COLORADO (USA)
Aerosol particles are ubiquitous in ambient air and are of great importance to human and environmental health, climate change, and many industrial processes. The ability to measure their chemical composition is essential to understand the sources of aerosols, their chemical properties, and their potential ...
ByTofwerk AG based in  Thun, SWITZERLAND
Bantox is a proprietary formulation of calcium silicates. It has served as our base chemical platform, allowing us to develop multiple product lines and many patents that serve a wide range of industries. Bantox stabilized waste complies not only with TCLP standards, but also with MEP (Multiple Extraction Procedure that EPA uses for long-term stability), SPLP and fresh water leach tests. For decades, silicates have stabilized heavy ...
ByThe TDJ Group, Inc based in  Barrington, ILLINOIS (USA)
Airport Weather Sensors and Components for Airport Weather Observation Systems (AWOS) and Runway Ice Detection Systems (IDS): Ceilometer, Cloud Height, Cloud Cover, Visibility and Runway Condition Sensors. Airports around the world use Lufft technology because it’s flexible, comes with open protocols and easy to integrate into existing solutions. Moreover Lufft’s sensors are reliable under any weather conditions and ...
ByOtt - Veralto based in  Kempten, GERMANY
MV Technologies hydrogen sulfide removal systems are in use to treat biogas for emissions control to beneficial end-use across all forms of biogas processes on farms, at wastewater treatment facilities and for large waste and industrial ...
ByMV Technologies, LLC based in  Broomfield, COLORADO (USA)
Biogas, produced in anaerobic digesters or covered lagoons at meat/poultry, food or beverage processing facilities is often used as fuel for boilers or other process equipment, to power generator sets, or is converted to CNG on-site or at third-party compressor stations through utility pipeline ...
ByMV Technologies, LLC based in  Broomfield, COLORADO (USA)
Stops sediment and organics from clogging drip lines and ...
ByEqueron - Equilibrium Drive based in  Arvada, COLORADO (USA)
Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. The result is a working relationship and reliable ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)
Cracking in a refinery is a process where the long organic chains in oil are broken to produce shorter chain organics that are more valuable than the oil. Fluid catalytic cracking (FCC) has generally replaced thermal cracking of petroleum hydrocarbon feed stocks. FCC produces more gasoline with a higher octane rating. FCC’s byproduct gases are more olefinic and valuable than those produced by thermal ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)
Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)
Coal Preparation Circuit: Three quarters of American coal is mined east of the Mississippi River. Half of this is “prepared” coal. Coal preparation offers a number of commercial and environmental benefits. These include increased quality and commercial value of saleable coal by achieving 75-80% ash reduction and 15-80% trace element reduction. Cleaned coal reduces transportation costs as well as reduced quantities of combustion ash requiring disposal. Coal preparation can also make marginal coal ...
ByWesTech Engineering, LLC based in  Salt Lake City, UTAH (USA)