- Home
- usa florida
- Applications
Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Oil, Gas & Refineries
- Agriculture
- Construction & Construction Materials
- Medical / Health Care
- Energy
- Mining
- Food and Beverage
- Environmental
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Soil and Groundwater
- Glassware
- Chemical & Pharmaceuticals
- Electronics and Computers
- Waste and Recycling
- Commercial
- Defense
- Health and Safety
- University / Academia / Research
- Plastics & Resins
- Travel & Leisure
- Forestry & Wood
- Paint
- Printing
- Textile
- Government
- Aerospace & Air Transport
- Communications / Telecom / Datacom
- Dry Cleaning
- Real Estate
- Maritime/Shipbuild/Water Transport
- Retail
- Packaging
Xprt Product Applications In Florida
1,219 applications found
Design high-performing, ‘low environmental impact’ GEOWEB channels for stormwater conveyance, as well as for erosion protection of containment facilities. Protect impervious liners in lagoons and detention basins, preventing degradation and contaminant leakage. With the GEOWEB system, channel and basin designs can be customized for each project with vegetation, aggregate or concrete infill, offering more economical solutions than rip-rap, gabions or reinforced concrete systems. The GEOWEB ...
ByPresto Geosystems based in  Appleton, WISCONSIN (USA)
Forrec produces plants for treating hospital and medical waste, featuring maximum production capacity and a high level of automation. The treatment of hospital waste is governed by strict regulations, which foresee the sterilization and disposal of potentially infectious hazardous medical waste. With FORREC plants, potentially infectious and hazardous hospital waste is pre-treated by grinding and conveying through sealed stainless steel screw conveyors, followed by grinding and final refining of the sterilized ...
ByFOR REC S.P.A. based in  Santa Giustina in Colle, ITALY
Non-contacting sludge blanket monitoring ensures that operators do not have to come into contact with the sludge. When used on primary settlement tanks the Sludge Finder 2 controls the de-sludging process to ensure a higher sludge density is recovered. When used on final settlement tanks it can be used to reduce the chances of a pollution event. The unique Sludge Finder 2 control system can also provide significant cost savings from less runtime on pumping systems and less energy spent on dewatering. By allowing ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Chamber and digester monitoring often refers to the part of the wastewater process where the solids are removed from the treated water and pumped to a chamber and/or digester ready for further processing. The range of technology at Pulsar means that the monitoring of this process becomes a lot easier and more efficient. An indication of tank level and flow rate can be given, providing operators full visibility of the process and an idea as to whether there is a blockage forming. Due to the nature of this ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Many mining applications use a settlement process - this is where all the particles and solids settle within tanks / clarifiers. In the past, measurements of these tanks have been labor intensive and puts operators at risk. Non-contacting interface measurement allows this process to be automated and reduce the health and safety issues that arise when trying to measure sludge interface ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
The monitoring and control of processes is crucial to ensure that plants are operating efficiently and effectively, preventing as much down time as possible and ensuring that they are operating to their full potential. This often means monitoring tank levels to ensure maximum stock / refill processes or monitoring flow to ensure that flows are running at capacity. Often, the measurement substance within the metals and mining industry can be extremely abrasive. Contacting magmeters are subject to increased risk of ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Drilling mud is usually pumped down the hollow drill pipe to the drill bit where it exits the pipe and is then flushed back up the brehole to the surface. Some muds are then discharged into the environment (via regulated methods), and others are recirculated back into the process for reuse. Pulsar Measurement provide flow solutions to ensure that drilling muds are flowing through pipes at the correct rate, giving an indication of blockages or issues within the process and aids oil and gas manufacturers with ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Storage tanks are used throughout the oil and gas industry for the bulk containment of fluids at different stages of the refinery process. More often than not, products will be stored for a short period of time before being transported for further processing. Pulsar Measurement offer both ultrasonic and radar technologies, along with a range of transducer faces to ensure the product is robust and resiliant against harsh atmospheric conditions. Accurate tank level and volume measurement eradicates the health and ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
A retention pond's primary use is to manage stormwater runoff to prevent flooding and downstream erosion, with the aim of improving water quality in an adjacent river, stream, lake or bay. Oil and Gas companies may use this particular form of water storage to perhaps mitigate flood risks of operations and/or to help the quality of water sources nearby, especially if they are discharging back into the environment. Non-contacting level measurement would be ideal for these applications as engineers don't need to go ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Fish Hatchery and Processing plants often need tight control over feed silos and to be able to monitor the constant flow of fresh water in fish ponds as well as keeping an eye on offal tanks. Pulsar Measurement's non-contacting technology has an advantage in this market, with its simple and easy installation and the fact that it does not come into contact with the application at all. It also aids health and safety compliance and helps to make the process simpler and easier for ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
As the population continues to grow, commercial agriculture consumes more and more water. Effective wastewater management has become an important factor in running a successful and sustainable agriculture business. In this industry, sustainability and profitability is dependent on a cost-effective wastewater management ...
ByE3 Solutions LLC based in  Tampa, FLORIDA (USA)
Air emissions attributed to animal agriculture consist of odorous and gaseous compounds as well as particulate matter associated with manure and animal management While localized problems associated with odor tend to get highlighted, gaseous compounds that get released into the atmosphere, such as ammonia and bioaerosols, plus wastewater runoff are becoming major regulatory issues and producers are now being forced to look at more effective measures of treatment and ...
ByMicronomix, LLC based in  Ocala, FLORIDA (USA)
Rapid return on investment: The nature of industrial waste is highly diverse, but is often associated with extremely high costs for disposal. In many cases onsite treatment with MAGSTM or WETTTM results in a rapid return on investment (ROI). The economic benefits differ from one application to another based on location, the type and quantity of waste and local economic ...
ByTerragon Environmental Technologies Inc. based in  Montreal, QUEBEC (CANADA)
The oil and gas industry has many applications that rely on the adsorptive capabilities of activated carbon. Amine scrubbers use GAC to remove carbon dioxide and hydrogen sulfide from gas streams. Glycol scrubbers are also used to remove moisture from gas streams. Surfactants, degradation products, and organic acids collect in these amine or glycol solutions and can cause foaming and corrosion that can lower the efficiency of these systems. ...
ByPuragen Activated Carbons based in  Palm Beach Gardens, FLORIDA (USA)
The POU/POE industry has strict performance standards. Filter units are tested and approved by ANSI recognized entities such as NSF, UL, and WQA. Most units are now tested to meet California Prop 65 standards for arsenic, antimony, and aluminum. Puragen Activated Carbons is a leader in this market offering high-quality coconut shell activated carbon products in standard, water-washed, and acid-washed options as well as enhanced catalytic carbon ...
ByPuragen Activated Carbons based in  Palm Beach Gardens, FLORIDA (USA)
TrapBag® barriers can be used in a variety of situations. When it comes to the construction industry, TrapBags are great for: Construction within water, Protecting against flooding and Preventing soil ...
ByTrapBag based in  Fort Myers, FLORIDA (USA)
Finding the right gas detector, and making sure it is in perfect working order, can mean the difference between life and death in environments where poisonous gases potentially exist. Confined space should be regularly tested to ensure atmospheric conditions remain safe. If workers exit a space and later need to re-enter, the atmosphere needs to be tested again for oxygen, combustible gases and toxic gases and ...
ByConcept Controls Inc based in  Burnaby, BRITISH COLUMBIA (CANADA)
As federal and state NPDES guidelines in the oil, gas and energy industries become more challenging it is paramount to remain in compliance. The Federal Clean Water Act requires oil and gas sites consisting of small construction activity to have a stormwater permit if the ...
ByStormpromax, Inc. based in  Fort Myers, FLORIDA (USA)
Dredging operations, whether on land or sea, rely largely on guesswork during the monitoring process. Density measurement methods in the dredging industry either lack accuracy or achieve accuracy via costly measurement instrumentation that require frequent replacement due to high ...
ByRed Meters based in  Orlando, FLORIDA (USA)
Energy recovery from various waste streams is an important part of the processing infrastructure in North America. The types of energy from waste includes electricity or steam from mass burn or RDF systems, gas from anaerobic digestion systems or through other biogas conversion technologies, and liquid fuels converted from recovered gases. This category also includes industrial processes where waste is used directly as an alternative fuel or a catalyst in the production of cement, steel or other ...
ByRRT Design & Construction Inc based in  Melville, NEW YORK (USA)