- Home
- usa florida
- Applications
Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Oil, Gas & Refineries
- Agriculture
- Construction & Construction Materials
- Medical / Health Care
- Energy
- Mining
- Food and Beverage
- Environmental
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Soil and Groundwater
- Glassware
- Chemical & Pharmaceuticals
- Electronics and Computers
- Waste and Recycling
- Commercial
- Defense
- Health and Safety
- University / Academia / Research
- Plastics & Resins
- Travel & Leisure
- Forestry & Wood
- Paint
- Printing
- Textile
- Government
- Aerospace & Air Transport
- Communications / Telecom / Datacom
- Dry Cleaning
- Real Estate
- Maritime/Shipbuild/Water Transport
- Retail
- Packaging
Xprt Product Applications In Florida
1,219 applications found
ByFAST-ACT based in  Topeka, FLORIDA (USA)
The GEOMAT Waste Water Recovery Systems are designed to be ideal for semi-permanent installations where installing a ground recovery system is not desired or economical. A Body Shop is an ideal application for this system as it can be custom designed and manufactured to specific needs while meeting all EPA ...
ByGEOMAT Patented Waste Water Recovery System based in  Tampa, FLORIDA (USA)
Ozone Generators and Hydroxyls Generators are used for odor elimination, odor control, air purification and to improve indoor air quality. Applications include hospitals, doctors offices, labs, waiting rooms, gyms, locker rooms, restoration clean up, ...
ByInternational Ozone Technologies Group, Inc. (IOTG) based in  Delray Beach, FLORIDA (USA)
In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in  Porto, PORTUGAL
Ozone is a very important tool for the disaster restoration industry. An ozone treatment is needed after a disaster because there are usually odors left behind that are signs of smoke damage, water damage and even mold growth. Ozone is a very strong oxidant that when used correctly can effectively remove odors caused by mold, smoke or any decaying organic materials. Ozone will destroy mold at its souce. Ozone is very efficient method for removing odors. An ozone treatment is very simple. Once a property is ...
ByInternational Ozone Technologies Group, Inc. (IOTG) based in  Delray Beach, FLORIDA (USA)
Street Sweeper Route Optimization is an often overlooked area that cities can reduce costs. Most street sweeper routes have been maintained for years and handed down on hand drawn maps. Very few cities have their street sweeper routes in GIS format to view. This creates many challenges. Commonly asked questions ...
ByC2Logix, Inc a Univerus company based in  Clearwater, FLORIDA (USA)
Residential Curbside Services requires the vehicles to make stops at most addresses on a street. This creates many challenges. C2Logix has Routing Software and solutions to optimize routes for maximum efficiency. Commonly asked questions ...
ByC2Logix, Inc a Univerus company based in  Clearwater, FLORIDA (USA)
Commercial Waste Collection requires the vehicles to make multiple stops sometimes in a large geographic area. The collection vehicles often must make multiple dump trips. They also service customers that are collected more than one time per week.Trying to optimize these commercial routes manually is impossible. It is difficult to look at the big picture and decide which customers need their collection day changed. This creates many challenges. Commonly asked questions ...
ByC2Logix, Inc a Univerus company based in  Clearwater, FLORIDA (USA)
A critical portion of any thermal mass flow meter is the factory calibration. The flow rate measured by the thermal flow meter is an inferred measurement. The instrument actually measures the power required to maintain the desired overheat temperature of the heated sensor above the reference sensor. This relationship between power and mass flow rate is established during the calibration. While considerable effort is made in the design and building the sensors, each sensor has slightly different heat transfer ...
BySage Metering, Inc. based in  Monterey, CALIFORNIA (USA)
In 1996, the first Intergovernmental Panel on Climate Change (IPCC) issued a report that underscored how aerosols and clouds impact radiative fluxes and modulate climate. Their first report and all subsequent reports every seven years have emphasized how the level of scientific understanding (LOSU) remains low. This major gap in our understanding of how aerosols and clouds alter climate continues to drive the need for more widespread and accurate measurements, especially of black carbon (BC) aerosols that ...
ByDroplet Measurement Technologies (DMT) based in  Longmont, COLORADO (USA)
Diminished visibility is a major cause of traffic accidents on roadways and cancelled or significantly delayed flights at airports. The source of the deterioration in visibility is the presence of aerosol and cloud (fog) particles in sufficient concentrations to attenuate visible radiation. Mitigating the impact of limited visibility requires better understanding the optical properties of aerosols and fog and improved forecasting of such events in order for drivers to be forewarned and airports to better schedule ...
ByDroplet Measurement Technologies (DMT) based in  Longmont, COLORADO (USA)
Radon is an odorless radioactive gas that results from the natural breakdown of uranium in soil. Uranium is present in most of the soil and rock around the world. It is typically concentrated in areas with lots of granite, shale, phosphate and ...
ByGreen Drains, Inc based in  Naples, FLORIDA (USA)
A major obstacle in the landfill industry is the proper disposal of leachate water. Per government regulations such as the EPA’s Landfill Effluent Standards (CFR 445) and Zero Liquid Discharge Requirements, leachate water must be treated before proper disposal. This process is costly, time and money wise, for landfill ...
ByE3 Solutions LLC based in  Tampa, FLORIDA (USA)
Combined Sewer Overflow (CSO) monitoring often referred to as Event Duration Monitoring (EDM), is the monitoring of the sewer network giving operators an early prediction of potential blockage. CSO Level and Velocity monitoring also give operators the opportunity to monitor stormflow, allowing them to report on when spillages occurred and how much was spilled. Monitoring these CSO events aids water utilities with compliance with regulatory obligations, allowing for data to be logged and viewed in ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Level and flow monitoring of lift and pump stations allow operators to program pump start and stop levels, allowing the process to be used to its full capacity and prevents damage done to pumps and other assets from running dry. Thanks to state-of-the-art pump control technology, pumps are able to be auto-reset and it allows for the best use of most efficient pumps. The non-contacting nature of some of our products creates reduced maintenance for plant operators and allows them to plan maintenance schedules ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Differential monitoring and control usually means the monitoring of two separate channels. For example, non-contacting level measurement technology can give an indication of the upstream and downstream levels, enabling pumps to be activated when the desired level is reached. It can also give users an indication of screen blockages for automated ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Sewer Network Monitoring involves monitoring level and flow within the sewer network to ensure that everything is running as it should be. Area-Velocity monitoring in these applications is particularly important as this helps give operators early warnings of potential blockages within the system. For example, a rising level without the corresponding rise in velocity indicates that something isn't right. Our non-contacting technology means there is no need to interrupt the network when it comes to installation, and ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Due to Pulsar's advancement in technology, excessive noise is picked up by our transducers and displayed on echo graphs. This gives end users an indication of a burst filer bag, bearing failure, or similar asset issue. It gives users the opportunity to establish exactly when the transducer starts receiving excessive noise and for how ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
Pool water flow through needs to be monitored for health and safety records and for the maintenance of the end-user. Pulsar Measurement has technology that can monitor both open channel and closed pipe flow, giving users a choice between contacting and non-contacting technology. Pulsar technology makes it possible to mount the sensor at the bottom of the pipe, or clamp-on to the outside of a pipe and monitor flow as it ...
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM
ByPulsar Measurement based in  Birmingham, UNITED KINGDOM