- Home
- Applications
- usa georgia
- clarifier system
Show results for
Refine by
Clarifier System Product Applications In Georgia (USA)
22 applications found
Through our experience and state of the art filtration systems, Lighthouse Filters has the capabilities to improve any municipal wastewater treatment plants. Whether it be the startup of a new treatment plant, or an existing plant needing a more efficient filtration system to increase the daily water capacity, Lighthouse has the equipment to handle any kind of wastewater. A typical PFD example of a system using our Plate Clarifier, Volcano, and ...
ByLighthouse Filters, LLC based in Dahlonega, GEORGIA (US) (USA)
Utilities using traditional hydro bins can accomplish this by installing a system using solids contact clarifiers and dewatering equipment. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Source waters with moderate-to-high turbidity and/or organics require pretreatment. WesTech can provide conventional layouts with separate flocculation and clarification, or combination units such as solids contact clarifiers and even high-rate processes that can squeeze into very small footprints. Need soft water? No problem, WesTech does that ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
WesTech offers you a comprehensive line of process equipment in the industrial market. Your project will be supported by a reliable engineering team with extensive experience in all types of industrial ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
WesTech leads the way in municipal sedimentation solutions for primary and secondary clarification. Customers around the world benefit from the Clarifier Optimization Package (COP), which provides clean effluent, maximizes overflow rates, and optimizes underflow ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
However, this is not a problem for Lighthouse with our state of the art filtration systems. To start, any bacteria in the influent wastewater would be removed by disinfection, typically with ultraviolet light, which would then flow to our Plate Clarifier with an attached flocculation tank to precipitate and remove any larger suspended solids in the ...
ByLighthouse Filters, LLC based in Dahlonega, GEORGIA (US) (USA)
Hydrogen Peroxide typically controls odors and corrosion at treatment plant headworks by direct oxidation of hydrogen sulfide (H2S) within the wastewater. In the direct oxidation mode, H2O2 is applied to the wastewater 5-30 minutes prior to the point where the odors are being released, generally as the wastewater line enters the plant boundary. The efficiency of hydrogen peroxide treatment depends upon the available reaction time, the level of iron in the wastewater (reaction catalyst), wastewater pH and ...
ByUSP Technologies based in Atlanta, GEORGIA (US) (USA)
Most power plants, be in Nuclear or Gas or Coal based, come up close to rivers, canals and the sea as they need large amounts of cooling-water. All water, especially sea water, contains fish, sea organisms, pathogens and algae. This leading to micro and macro fouling which adversely affects the efficiency of the power ...
ByPristine Water based in , INDIA
Coal Preparation Circuit: Three quarters of American coal is mined east of the Mississippi River. Half of this is “prepared” coal. Coal preparation offers a number of commercial and environmental benefits. These include increased quality and commercial value of saleable coal by achieving 75-80% ash reduction and 15-80% trace element reduction. Cleaned coal reduces transportation costs as well as reduced quantities of combustion ash requiring disposal. Coal preparation can also make marginal coal ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Cold Lime Softening: Hard water is water that has high mineral content. The name comes from the hard scale that forms when this water is boiled. It is not harmful to human health, but in the industrial setting it causes costly breakdowns in boilers, cooling towers, and other water handling equipment. The divalent cations Mg and Ca are the most frequently found minerals causing hard water. These ions enter water supplies by leaching from minerals in underground aquifers. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Many mining processes require dewatering. Rotary lobe pumps are well suited for feeding dewatering devices because of their ability to pump a measured, near pulseless flow at any pressure within the pump’s PSI range. Additionally, mining applications are often abrasive. Pump wear rate is greatly effected by pump speed. Typically, rotary lobe pumps run at 200-300 rpm in abrasive applications whereas centrifugal pumps are typically run at 1750 rpm. This results in much faster wear for centrifugal pumps. ...
ByLobePro, Inc. based in Brunswick, GEORGIA (US) (USA)
Hydraulic fracturing ("fracking") as a method to stimulate shallow, hard rock oil wells began in the 1860s. It was used in Pennsylvania, New York, Kentucky, and West Virginia. Initial efforts used explosive nitroglycerin in oil, water, and gas wells. Nonexplosive acid for well stimulation was introduced in the 1930s. Acid etching prevented fractures from closing completely, enhancing recovery. The same phenomenon was later discovered with water ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Sedimentation, flotation, mixing, pulp separation and chemical recovery systems are among the myriad of process equipment WesTech supplies to the pulp and paper industry. Customized to the unique needs of operating plants, WesTech liquid/solids and liquid/liquid separation expertise is built upon years of working with plant operators and owners. The result is a working relationship and reliable ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Landfills are categorized by regulations in three types: industrial, municipal, and hazardous. Individual landfills may be further differentiated by the types of waste which they accept. All landfills are required to be capped, usually occurring at the end of each day. The cap is typically 6-8” of soil. The cap reduces odor and loss due to wind. At the closing of the landfill, a permanent cap consisting of a membrane and more soil is added. Before the landfilling operation begins, an ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Many times mining, oil and gas exploration, construction, and other activities take place in remote areas of the world. In these cases it is necessary to provide both potable water and treatment of sanitary wastes for the facility. In addition, many of these activities take place in temporary fashion as the sites will either be developed or abandoned at a future ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Countercurrent Decantation (CCD): Rock passes into a dump hopper and is then transferred to a vibrating grizzly screen. The oversized material is sent to a jaw crusher. The crushed product is combined with the grizzly undersize and the ore is conveyed to the coarse ore bin. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
APS Floc Logs® can be used to clarify stormwater removing turbidity such as sediment, heavy metals, and inanimate nutrients reducing the total suspended solids. Water treatment is much easier when the soil is treated at the source. Less sediment being picked up by stormwater means the less sediment that is moving off site, the less turbid your stormwater is, and ultimately the more cost effective ...
ByApplied Polymer Systems, Inc. (APS) based in Woodstock, GEORGIA (US) (USA)
Acid mine drainage (AMD) is typically characterized by low pH and high dissolved iron. The acid mine drainage may also contain high amounts of CO2 which forms carbonic acid and further depresses the ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Heavy Metals Wastewater Treatment System (Chrome Removal): Chromium is present in the wastewaters of a number of industries, including: stainless steel manufacturing, protective coatings on metal, magnetic tapes, chrome plating, tanneries, textile dyes production, pigments and paint production, production of cement, paper, rubber, etc. Chromium is typically precipitated in two steps: reduction and ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
High fluoride levels in wastewater can be problematic for industries using hydrofluoric acid (HF) as a cleaning agent or etchant, such as the semiconductor, solar cell and metals manufacturing industries. HF is also used as a reactant or catalyst in the plastics, pharmaceutical, petroleum refining and refrigeration industries. Fluoride concentrations from these industries may range from 100 to more than 10,000 ppm in rinse waters, but discharge limits are often below 20 ppm. ...
ByPorex - Filtration Group based in Fairburn, GEORGIA (US) (USA)