- Home
- usa georgia
- Applications
Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Air and Climate
- Agriculture
- Construction & Construction Materials
- Mining
- Oil, Gas & Refineries
- Energy
- Food and Beverage
- Pulp & Paper
- Aerospace & Air Transport
- Metal
- Environmental
- Medical / Health Care
- Waste and Recycling
- Monitoring and Testing
- Soil and Groundwater
- Automobile & Ground Transport
- Health and Safety
- Electronics and Computers
- Glassware
- Chemical & Pharmaceuticals
- Defense
- University / Academia / Research
- Commercial
- Travel & Leisure
- Paint
- Plastics & Resins
- Government
- Forestry & Wood
- Printing
- Real Estate
- Maritime/Shipbuild/Water Transport
- Communications / Telecom / Datacom
- Textile
- Retail
- Packaging
Xprt Product Applications In Georgia (USA)
837 applications found
Premium
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. Myron L® Company’s portable AGRI-METERS™ provide you with a simple, fast, and accurate means of testing these ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
“A technique of growing plants in nutrient solution”. Hydroponics literally means water-working or water- activation. It is a cultivation technique for growing plants in highly oxygenated, nutrient enriched water, rather than soil. The nutrient solution and its management are the cornerstone for a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. In soil, biological decomposition ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facility operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Osmosis is the phenomenon of water molecules passing through a semi-permeable membrane from a region with lower dissolved solids to a region with higher dissolved solids until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
There is a long history of spice adulteration, which dates back thousands of years. The main incentive behind the adulteration is economic: either reduction of cost or increase in perceived value. Most adulterants are harmless, such as adulteration with products from non-authentic geographic origins. However, some adulterants are deadly. Paprika, as an example, can be adulterated with tomato skins and brick dust, but it can also be adulterated with lead oxide and carcinogenic chemical dyes, such as Sudan I dye. ...
ByGalaxy Scientific Inc based in  Nashua, NEW HAMPSHIRE (USA)
Premium
As market leader in the field of water treatment, AERZEN has developed trend-setting concepts that support plant constructors, engineers and operators of wastewater treatment plants in areas such as the selection of technology, increasing efficiency, process safety, data analysis, digitisation, conserving resources, increasing productivity and much more. Summarised under the term AERwater, we offer a holistic solution approach with finely tuned service module via a tight linkage of hardware, software and ...
ByAerzener Maschinenfabrik GmbH based in  Aerzen, GERMANY
Premium
Water is a precious commodity. To protect our natural waters and to support drinking water production, all wastewater is therefore first cleansed of containments and pollutants before it is returned to the water cycle. To treat the water and to achieve the best possible, natural water quality, different processes are used. Generally, the treatment of wastewater can be divided into two basic types . Firstly, problematic substances are removed from the water. This is done with cleaning, iron removal, manganese ...
ByAerzener Maschinenfabrik GmbH based in  Aerzen, GERMANY
Premium
The pneumatic transport of bulk materials should be fast, gentle and with minimal energy expenditure. A clear task for real specialist. Oil-free roots blowers, screw blowers and screw compressors from AERZEN can handle any kind of transport need. With unparalleled efficiency and reliability. Versatile, Efficient and Reliable: Our products Delta Blower, Delta Screw and Delta Hybrid are powerful universal geniuses: The smallest units can be mounted on silo vehicles. The largest machines are used in pumping stations. ...
ByAerzener Maschinenfabrik GmbH based in  Aerzen, GERMANY
Premium
Biological treatment in the aeration tank is not only the key stage in prevalent wastewater treatment processes, it is also the most energy-intensive. If operators want to improve the energetic balance of their wastewater treatment plant, optimising the aeration in the aeration tanks gives them a large amount of design leeway. The correct dimensioning of the aerators, the selection of the appropriate technologies and the intelligent data-guided control of the operation in the aeration tank are therefore the focus ...
ByAerzener Maschinenfabrik GmbH based in  Aerzen, GERMANY
Premium
According to a study by the German Environment Agency , wastewater treatment plants are responsible for around 1% of Germany's total electricity consumption. What initially sounds like a very small percentage, however, offers a highly attractive savings potential from the point of view of individual wastewater treatment plant operators. One typical example of the savings potential in wastewater treatment plants is tank aeration. For example, state-of-the-art blower technologies and demand-driven control technology ...
ByAerzener Maschinenfabrik GmbH based in  Aerzen, GERMANY
Premium
Agriculture is the science and art of cultivating plants and livestock. The agriculture industry started thousands of years ago and is currently one of the world’s largest industries. It employs more than a billion people and generates over a trillion dollars of products annually. Cutting raw materials and production costs while ensuring safety and quality is a daunting task to the Agriculture industry. The variation in ingredients and materials used in agriculture process presents challenges for quality ...
ByGalaxy Scientific Inc based in  Nashua, NEW HAMPSHIRE (USA)