- Home
- usa indiana
- Applications
Refine by
Industries served
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Manufacturing, Other
- Oil, Gas & Refineries
- Construction & Construction Materials
- Metal
- Soil and Groundwater
- Agriculture
- Pulp & Paper
- Environmental
- Mining
- Energy
- Food and Beverage
- Automobile & Ground Transport
- Medical / Health Care
- Health and Safety
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Electronics and Computers
- Plastics & Resins
- Waste and Recycling
- Commercial
- Defense
- Glassware
- Textile
- Travel & Leisure
- Forestry & Wood
- Paint
- Printing
- Communications / Telecom / Datacom
- University / Academia / Research
- Packaging
Xprt Product Applications In Indiana
551 applications found
The advantages of paste thickeners in tailings circuits have been well-established for most minerals. The type of paste thickener underflow generally used for surface stacking of tailings is called “thickened tailings.” Thickened tailings are a suspension of solids which are relatively non-settling and non-segregating and which have a higher concentration and viscosity than that of conventional tailings. Common applications include a thickener with underflow pumps that are typically centrifugal and ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Effective screening of inorganics and removal of grit improves the effectiveness of your downstream processes and the longevity of your equipment. WesTech engineers and manufactures a full line of headworks equipment. Our experience and our service-driven approach help you find the right solutions to get the most out of your headworks. The more debris and grit you can remove, the more efficient your downstream equipment and processes will become. Your wastewater treatment facility will save time and money with ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Aeration is an effective and low-cost solution to oxidize iron and manganese. It can also provide high-efficiency removal of gases such as hydrogen sulfide, carbon dioxide, methane, and volatile organic carbons, which results in better process performance and/or improvement of taste and ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Source waters with moderate-to-high turbidity and/or organics require pretreatment. WesTech can provide conventional layouts with separate flocculation and clarification, or combination units such as solids contact clarifiers and even high-rate processes that can squeeze into very small footprints. Need soft water? No problem, WesTech does that ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
WesTech provides liquid/solids separation solutions for mineral applications worldwide. From supplying specialized equipment to turnkey systems, WesTech has the expertise and experience to provide customized solutions that are cost effective and ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
WesTech enjoys more than 40 years of experience in municipal wastewater treatment. WesTech starts with creating value and ensuring success for engineers, contractors, and plant operators. Customers praise not only WesTech’s equipment, but also their overall experience with WesTech’s ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
Groundwater Treatment: WesTech offers a wide variety of equipment for groundwater treatment for potable use. Whether your treatment objective is gas removal, nitrate removal, iron and manganese removal, color removal, softening, or even filtering a source under the direct influence of surface water, WesTech has your ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
SmartCEMS Statistical Hybrid PEMS is used as a compliance monitoring solution for boilers, heaters, and other a variety of sources at food production facilities. CMC’s SmartCEMS with Data eLements provide a complete compliance monitoring system for 40 CFR Part 60 compliance. CMC Solutions will guarantee certification of its PEMS products for use in compliance monitoring. CMC’s virtual process analyzer (VPA) product is used for optimization, backup analysis, and pollution minimization strategies in the ...
ByCMC Solutions, LLC based in Farmington Hills, MICHIGAN (USA)
Bottom Ash Pond Replacement: When coal is burned, two major forms of ash are produced. The fly ash is light and leaves the furnace with hot gases. The bottom ash is heavy and stays in the furnace until it is scraped out. Due to potential liability issues and/or the need to find new real estate at power plants for expansion, many utilities must replace their traditional coal ash ponds. Utilities using traditional hydro bins can accomplish this by installing a system using solids contact clarifiers and dewatering ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
USALCO’s aluminum based coagulants have become the preferred choice of municipalities and industry for the treatment of potable (drinking) water and plant process water (such as pulp/paper and food/beverage). Water treatment processes typically employ the use of the following USALCO® products to effectively meet and/or exceed customer’s requirements for regulatory ...
ByUsalco based in Baltimore, MARYLAND (USA)
Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the ...
ByQED Environmental Systems, Inc based in Dexter, MICHIGAN (USA)
Since 1982, QED has been the leading supplier of air-powered pumps for groundwater sampling, leachate and condensate management, providing expertise in groundwater monitoring, leachate level control and methane recovery systems and equipment to landfills ranging from small municipal facilities to large industrial and military sites, including the leading national and international solid waste management ...
ByQED Environmental Systems, Inc based in Dexter, MICHIGAN (USA)
Our laser profile measurement systems are used for non-contact scanning of the refractory lining in metallurgic reaction and transport vessels, like converters, EAFs, torpedo ladles and steel casting ladles, as well as in open die forging shops. The measurement values detected by laser scanners permit early and effective patching of defective locations and increase the lifetime of the refractory lining. Refractory costs are reduced at the same time operating safety is increased. The product assortment ranges from ...
ByCETCO based in New York, NEW YORK (USA)
Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous ...
ByEcosorb by OMI Industries based in Palatine, ILLINOIS (USA)
Control Asphalt Odors Naturally: The production of hot mix paving asphalt generates odors that can be strong, persistent, and a nuisance to employees and neighbors alike. Controlling and abating these odors can be a ...
ByEcosorb by OMI Industries based in Palatine, ILLINOIS (USA)
Anaerobic digestion is a collection of processes by which microorganisms break down biodegradable material in the absence of oxygen. Anaerobic digestion, a simple process, can greatly reduce the amount of organic matter which might otherwise be destined to be dumped at sea, dupmed in landfills, or burned in incinerators. Whether for waste-to-energy or for conditioning of biosolids prior to disposal, WesTech offers complete digestion systems. WesTech’s systems provide effective and reliable solids storage, ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
TenCate Geotube technology provides cost-effective and efficient dewatering and containment in the mining and mineral processing industry. In mining and mineral processing (mine tailings, coal sludge, etc), TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or reduces storage footprint by sometimes 50 to 80%. Conditioners or polymers are normally used to promote flocculation to improve dewatering rates, solids retention, filtrate ...
ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS
The complex Oil and Gas industry has a significant impact on water resources due to its water-intensive operations and to avoid environmental harm. At AFA, we go above and beyond by helping to prevent equipment and control failures, help mitigate environmental and financial risk, and by staying on the cutting edge of research and innovation in this rapidly changing ...
ByArthur Freedman Associates, Inc. (AFA) based in Dyer, INDIANA (USA)
Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling ...
ByNLB Corporation based in Wixom, MICHIGAN (USA)
Hydraulic fracturing ("fracking") as a method to stimulate shallow, hard rock oil wells began in the 1860s. It was used in Pennsylvania, New York, Kentucky, and West Virginia. Initial efforts used explosive nitroglycerin in oil, water, and gas wells. Nonexplosive acid for well stimulation was introduced in the 1930s. Acid etching prevented fractures from closing completely, enhancing recovery. The same phenomenon was later discovered with water ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)