- Home
- usa minnesota
- Applications
Refine by
Industries served
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Air and Climate
- Oil, Gas & Refineries
- Medical / Health Care
- Energy
- Construction & Construction Materials
- Food and Beverage
- Agriculture
- Mining
- Glassware
- Pulp & Paper
- Environmental
- Electronics and Computers
- Metal
- Automobile & Ground Transport
- Commercial
- Health and Safety
- Aerospace & Air Transport
- Plastics & Resins
- Soil and Groundwater
- Communications / Telecom / Datacom
- Textile
- Defense
- Dry Cleaning
- Forestry & Wood
- Packaging
- Paint
- Chemical & Pharmaceuticals
- Waste and Recycling
- Travel & Leisure
- University / Academia / Research
- Government
Xprt Product Applications In Minnesota
645 applications found
Premium
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. Myron L® Company’s portable AGRI-METERS™ provide you with a simple, fast, and accurate means of testing these ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
“A technique of growing plants in nutrient solution”. Hydroponics literally means water-working or water- activation. It is a cultivation technique for growing plants in highly oxygenated, nutrient enriched water, rather than soil. The nutrient solution and its management are the cornerstone for a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. In soil, biological decomposition ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facility operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Osmosis is the phenomenon of water molecules passing through a semi-permeable membrane from a region with lower dissolved solids to a region with higher dissolved solids until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Deposits and corrosion as well as undesired emulsion, foam and toxic gases impact the operation and the occupational safety in refineries. Kurita provides tailored treatment concepts to increase the operational and the occupational safety. Our product lines and technologies are based on decades of experience in process treatment and they contribute to reduce your total operating ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
For dedicated markets or regions, Kurita Water Solutions works closely with retail companies, in accordance with a clearly defined distribution policy. We have established strong partnerships with these companies, who have proven to be serious and competent. We trust them as completely as our own ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
The paper and board industry is in a geographic and structural transition. The industry is addressed by rising legal, economic and ecological demands which require a high level of innovation. As a leading global provider of unique solutions for industries that use water and energy intensively Kurita has a strong commitment to paper. We have a proven expertise in the supply and application of benchmarking products and technologies that support the paper industry in developing innovative products, optimizing ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
Innovative solutions to prevent corrosion, deposits and microbiology. An optimal heat transfer is the most important point in every water-cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops customised solutions for cooling and process water systems, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN
Premium
Equipment and Engineering offers the right solution for your application of Kurita Products. Starting from simple dosing pumps up to specific dosing systems for special applications Kurita provides you the right solution for your application. Moreover Kurita offers also monitoring and control equipment to analyze that the right concentration of your Kurita products is being used in your system. Further Kurita provides specific equipment to follow the KPIs of your system, so you can be sure that the expected ...
ByKurita Water Industries Ltd based in  Tokyo, JAPAN