usa missouri
Applications

Xprt Product Applications In Missouri

521 applications found

In Missouri Available In Missouri Near Missouri

Braking systems solutions for the renewable energy sector

Braking systems solutions for the renewable energy ...

ByHilliard Corporation based in Elmira, NEW YORK (USA)

Drive train solutions for the outdoor power equipment sector

Drive train solutions for the outdoor power equipment ...

ByHilliard Corporation based in Elmira, NEW YORK (USA)

Advanced Wound Matrix for Surgical and Incisional Wound Management

Confidence in the management of your surgical wounds, including incisions, is ...

ByETS Wound Care based in Rolla, MISSOURI (USA)

Advanced Wound Matrix for Providers

ETS Wound Care ensures its customers have the highest quality wound care solutions and un-paralleled value. ...

ByETS Wound Care based in Rolla, MISSOURI (USA)

Advanced Wound Matrix for Patient Information

What is MIRRAGEN® Advanced Wound Matrix? MIRRAGEN® Advanced Wound Matrix is a fibrous material designed for the management of wounds. The material is composed of a unique borate-based glass that is 100% absorbable by the body and resembles cotton candy in appearance. ...

ByETS Wound Care based in Rolla, MISSOURI (USA)

Advanced Wound Matrix for Pre-Clinical Study

MIRRAGEN Advanced Wound Matrix was tested in a clinically relevant porcine wound model under GLP ...

ByETS Wound Care based in Rolla, MISSOURI (USA)

Chain Trenchers for Wind and Solar Energy

The Hydramaxx Chain Trenchers are the preferred machines for installing the Electrical Cabling on Wind and Solar farms. The rubber tires and our custom cable installation boxes give our trenchers the unique ability to lay the cable to the engineering specification, and move rapidly between end and start points. Port Industries has numerous cable boxes and cable guide systems to prevent damage to the electrical cables, and improve the productivity of the installation crew. We have cable boxes and cable guides for ...

ByPort Industries, Inc. based in Palmyra, MISSOURI (USA)

Removal of organic compounds & toxity for wastewater treatment industry

Federal and State regulatory agencies are increasingly requiring additional water quality testing and controls of the toxicity of discharges to receiving streams. Granular Activated Carbon (GAC) helps meet these pollution regulations. If organic chemicals have been identified as contributing to discharge toxicity, Calgon Carbon Corporation can work with facilities, and their engineering firms, to help meet stringent criteria associated with their NPDES permit. GAC can be employed as a cost-effective treatment for ...

ByCalgon Carbon Corporation based in Moon Township, PENNSYLVANIA (USA)

Sampling for the water and wastewater industry

Sampling requirements in the water and waste water treatment industry demand safe and reliable pump control. Many sampling applications require a suction lift. There is no better suction lift than that achieven using a peristaltic oump which lift up to 30 feet. Watson-Marlow pumps are perfect for automatic or manual sampling at the different stages of the treatment process. They accept PROFIBUS RS232, RS485, 4-20mA and 0-5V signal and can be fitted with volt free and two analogue contacts for proportional stroke ...

ByWatson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM

Monitoring petroleum hydrocarbons in wastewater

The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Water Measurement Monitors for Monitoring Fuels in Stormwater

The Situation: A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of compliance discharge by capturing all stormwater in storm drains, which is then sent to treatment systems prior to discharge. At ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Water Measurement Monitors for Monitoring Leaks in Heat Exchangers

Optical instruments called fluorometers can very easily detect and measure dissolved petroleum hydrocarbons in water, and at very low concentrations. As shown in the study below, TD-4100 series monitors are able to measure xylene continuously over four consecutive weeks with a direct correlation coefficient of 0.9967 compared to GC grab sample ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Process analyzers & instruments for trace carbon dioxide

ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)

Process analyzers & instruments for trace moisture

ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)

Process analyzers & instruments for trace oxygen

ByAMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA)

Water Measurement Monitors for Oil Cooler Leak Detection Sector

Power plants, paper and steel mills and other industries with rotating equipment often use recirculated water for the cooling of lubricating, hydraulic, turbine and transformer oil. If an oil cooler leaks, the loss of oil can cause significant damage to the pumps, compressors and motors. High oil & grease water discharge test results can be caused by oil contamination. In some cases, air quality issues can also occur. A UV fluorescence oil in water monitor from Turner Designs Hydrocarbon Instruments can ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Water Measurement Monitors for Monitoring Hydrocarbons in Wastewater

The Situation: A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from tanker bilges, contaminated rainwater runoff, truck spills, oil spills into waterways, crankcase drain oils, hydraulic oils and industrial lubricants, ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Fiber reinforced polymer solutions for water & wastewater industry

Enduro provides turnkey solutions through custom design, engineering, and a wide breadth of water and wastewater product ...

ByEnduro Composites based in Houston, TEXAS (USA)

Water Measurement Monitors for Monitoring Hydrocarbon Leaks in Steam Condensate

The Situation: Refineries use a significant amount of steam in the process of distilling gasoline, diesel and other hydrocarbon products. The refinery design will collect and return as much steam as possible to save on energy, water consumption and sewering costs. For some refineries 50% of the steam can be recovered. Because the return steam can be contaminated by hydrocarbon leaks in the heat exchangers, refineries often will install a monitoring system to alert operators when a hydrocarbon leak has ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Sample handling solutions for water in ethanol analyzer sector

The Water in Ethanol Analyzer continuously measures water concentration in alcohol and displays the concentration on the unit’s touch screen display in real-time. The all-inclusive Water in Ethanol Analyzer comes preassembled in a waterproof NEMA4X enclosure with a dedicated sample flow cell outside of the enclosure. The analyzer includes a PX2+ NIR photometer with two fiber optic cables and a cross flow cell with two optical interface ...

ByCustom Sensors & Technology (CST) based in Fenton, MISSOURI (USA)

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you