- Home
- usa missouri
- Applications
Refine by
Industries served
- Monitoring and Testing
- Air and Climate
- Water and Wastewater
- Manufacturing, Other
- Energy
- Oil, Gas & Refineries
- Food and Beverage
- Construction & Construction Materials
- Mining
- Medical / Health Care
- Metal
- Glassware
- Pulp & Paper
- Agriculture
- Health and Safety
- Electronics and Computers
- Environmental
- Plastics & Resins
- Automobile & Ground Transport
- Forestry & Wood
- Chemical & Pharmaceuticals
- Waste and Recycling
- Textile
- Government
- Defense
- Aerospace & Air Transport
- Packaging
- Commercial
- Communications / Telecom / Datacom
- Soil and Groundwater
Xprt Product Applications In Missouri
521 applications found
Premium
Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation’s waterways. Today, in ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. Myron L® Company’s portable AGRI-METERS™ provide you with a simple, fast, and accurate means of testing these ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
“A technique of growing plants in nutrient solution”. Hydroponics literally means water-working or water- activation. It is a cultivation technique for growing plants in highly oxygenated, nutrient enriched water, rather than soil. The nutrient solution and its management are the cornerstone for a successful hydroponics system. The function of a hydroponics nutrient solution is to supply the plant roots with water, oxygen and essential mineral elements in soluble form. In soil, biological decomposition ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Years ago, high purity water was used only in limited applications. Today, deionized (Dl) water has become an essential ingredient in hundreds of applications including: medical, laboratory, pharmaceutical, cosmetics, electronics manufacturing, food processing, plating, countless industrial processes, and even the final rinse at the local car ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Anyone and everyone who is responsible for operating and maintaining a swimming pool or spa has to test, monitor, and control complex, interdependent chemical factors that affect the quality of water bathers are immersed in. Additionally, aquatic facility operators must be familiar with all laws, regulations, and guidelines governing what these parameters should ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Osmosis is the phenomenon of water molecules passing through a semi-permeable membrane from a region with lower dissolved solids to a region with higher dissolved solids until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-a has been used as a guideline for control. Now a simple “on line” test for the relative measurement of ionic contamination has been ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Oxidation Reduction Potential or Redox is the activity or strength of oxidizers and reducers in relation to their concentration. Oxidizers accept electrons, reducers lose electrons. Examples of oxidizers are: chlorine, hydrogen peroxide, bromine, ozone, and chlorine dioxide. Examples of reducers are sodium sulfite, sodium bisulfate and hydrogen sulfide. Like acidity and alkalinity, the increase of one is at the expense of the ...
ByMyron L Company based in  Carlsbad, CALIFORNIA (USA)
Premium
Do you own any multi-family properties? Or, do you manage properties for a living? If you answered yes, then you know that managing wastewater efficiently is crucial for the well-being of residents and the community. Our multi-family wastewater treatment system company creates units that are designed to handle varying loads and provide consistent treatment performance. These scalable and adaptable systems ensure that wastewater is treated effectively, contributing to a healthier living environment for all ...
ByBioMicrobics, Inc based in  Lenexa, KANSAS (USA)
Premium
Small municipalities face unique wastewater treatment challenges, often requiring decentralized solutions to manage their wastewater effectively. At BioMicrobics, we are a small municipal wastewater treatment systems company that is here to help. Our wastewater pros provide systems designed to handle the needs of local communities. The advanced technologies at BioMicrobics provide a cost-efficient and environmentally friendly approach to wastewater treatment. This enables municipalities to meet regulatory ...
ByBioMicrobics, Inc based in  Lenexa, KANSAS (USA)
Premium
Are you a homeowner? If so, you’ll want to ensure that all wastewater is being treated properly. After all, wastewater can impact the health of your family and the environment. BioMicrobics offers residential wastewater treatment systems designed to efficiently treat domestic wastewater on-site. Doing this minimizes the environmental impact of wastewater while still complying with local regulations. With our easy-to-install and low-maintenance systems, you can enjoy peace of mind, knowing that your household ...
ByBioMicrobics, Inc based in  Lenexa, KANSAS (USA)
Premium
At BioMicrobics, we understand the unique challenges that businesses face when it comes to wastewater treatment. As an experienced commercial wastewater treatment system company, BioMicrobics utilizes wastewater treatment units that are engineered to handle higher flow rates and pollutant loads. These efficient wastewater systems are ideal for restaurants and offices; not to mention other commercial establishments. With a focus on cost-effectiveness and performance, BioMicrobics’ commercial wastewater ...
ByBioMicrobics, Inc based in  Lenexa, KANSAS (USA)
Premium
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)
Premium
Summary of areas where an Acme scraper strainer can be installed in industrial marketplace and automatic strainer application. The market niche for ACME scraper-strainers and application for strainers is for screen openings larger than .003 inches or 75 microns and goes up to a high end of 6 inch or 150mm particles. At the finer straining end of the ACME line, there is an overlap with the upper end of backwash-type strainers of various designs. As particle sizes grow larger, backwash units fail to compete because ...
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)
Premium
ByAcme Engineering Prod. Ltd. based in  Mount-Royal, QUEBEC (CANADA)