- Home
- Applications
- usa ohio
- astm method
Refine by
Astm Method Product Applications In Ohio
6 applications found
Premium
Introduction These test methods cover the determination of 4-carboxybenzaldehyde (4-CBA, 4-formylbenzoic acid) and p-toluic acid (p-TOL, 4-methylbenzoic acid) in purified terephthalic acid (PTA) by capillary electrophoresis (CE) with normal or reverse voltage mode and UV ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
INTRODUCTION: This test method is applicable for determination of the dissolved inorganic anions; fluoride, bromide, chloride, nitrite, nitrate, ortho-phosphate, and sulfate in aqueous matrices using capillary ion electrophoresis with indirect UV detection. The method can be applied to drinking water, waste water and ground ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Sauereisen No. 600 flake Basolit Sulfur Capping Compound has been used for many years by concrete testing laboratories for testing concrete cylinders for comprehensive ...
BySauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA)
Premium
Introduction A conventional standard method of total mercury det ermination in water using atomic absorption spectrometry (AAS) involves preliminary sample digestion that ta kes from 30 minutes to 8 hours depending on the digestion conditions. The use of a mercury analyzer RA-915M/RA-915+ with Zeeman background correction in combination with PYRO-915+ pyrolysis attachment provides direct dete rmination of mercury in process and waste waters contaminated with mercury without digesti on or any other sample ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Premium
Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)