- Home
- Applications
- usa ohio
- source water
Refine by
Source Water Product Applications In Ohio
17 applications found
Premium
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Whether TOC or VOC, Teledyne Tekmar has the best instruments for your pharmaceutical water-quality testing needs. Introduction of organic matter into water systems occurs not only from living organisms and from decaying matter in source water, but from purification and distribution system materials. ...
ByTeledyne Tekmar based in Mason, OHIO (USA)
One of the greatest problems facing the planet is the management, conservation and equitable distribution of fresh water supplies. The fresh water sources may be lakes, rivers or ground water aquifers, most of which are now under ...
ByHeron Instruments Inc. based in Dundas, ONTARIO (CANADA)
Many fresh water sources have been degraded to toxic levels by the inclusion of industrial, agricultural, and human waste products that have been discharged into the closest body of water, accidentally or deliberately for many ...
ByHeron Instruments Inc. based in Dundas, ONTARIO (CANADA)
Having quality water where you need it and when you need it is crucial for all farms. Agricultural water sources are imperative for healthy crops and livestock. When algae is present, it can create a huge loss for your business. Irrigation water is vulnerable to blue-green algae blooms during peak summer months. ...
ByHydro BioScience, LLC (HBS) based in Piney Flats, TENNESSEE (USA)
Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water. ...
ByIndustrie De Nora S.p.A. based in Milan, ITALY
Reducing the risk of infection transmission. In a world where high-density living in urban areas is increasing, and healthcare and the spreading of pandemics are among top concerns, the role of the cleaning industry is of great importance, though often ...
ByIndustrie De Nora S.p.A. based in Milan, ITALY
Water hazards, lakes and ponds add a challenge for the player, but also lend to the beauty of the game. Keeping ponds and water features clear of algae and biofilm keep the course beautiful and inviting for both guests and wildlife. Our chemical free, environmentally safe algae management systems can help enhance your course’s natural ...
ByHydro BioScience, LLC (HBS) based in Piney Flats, TENNESSEE (USA)
Winning with electrode design to reduce energy costs in traditional processes and UAT Reverse Osmosis (RO) Membrane Filtration Systems to meet any tap or brackish application need. Nickel and cobalt production, precious metal refining (gold, silver), recovery of copper from bleed streams or valuable metals from industrial wastewater, are some of the applications of our titanium DSA ...
ByIndustrie De Nora S.p.A. based in Milan, ITALY
Crossflow membrane technology is widely used throughout the process industries to provide a cost-effective solution for reducing wastewater volumes. In many cases, the technology can achieve a reduction in the volume of wastewater by a factor of five to ten times, offering potential savings on effluent charges as well as producing a clean water stream that can often be reused as wash water or cooling water within a facility. In some cases the concentrated wastewater can be reused in the production process giving a ...
ByMembrane Specialists LLC based in Hamilton, OHIO (USA)
The Solution: Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Clean water is critically important to vineyards and wineries, from irrigation, to efficiency and infrastructure. Understanding how algae blooms can impact your business will better help you identify and resolve ...
ByHydro BioScience, LLC (HBS) based in Piney Flats, TENNESSEE (USA)
Teledyne Tekmar has been the market leader in environmental and drinking water testing for decades, having invented many of the instrumental technologies used in today’s lab. From TOC drinking water analysis to EPA compendium methods for soil and water, Tekmar has the right instrument for your ...
ByTeledyne Tekmar based in Mason, OHIO (USA)
The Situation: Refineries use a significant amount of steam in the process of distilling gasoline, diesel and other hydrocarbon products. The refinery design will collect and return as much steam as possible to save on energy, water consumption and sewering costs. For some refineries 50% of the steam can be recovered. Because the return steam can be contaminated by hydrocarbon leaks in the heat exchangers, refineries often will install a monitoring system to alert operators when a hydrocarbon leak has ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The world’s surface is slightly over 70% water with billions of gallons of surface water and ground water used daily in society. Whether it is for drinking, hygiene, washing, cooking, recreation, agriculture, or power generation and industrial coolants, water is an undeniable source of ...
ByCarmeuse Americas based in Pittsburgh, PENNSYLVANIA (USA)
The Situation: Hydrocarbons in municipal water supplies, including fresh water and desalination systems, are commonly limited to less than 1 part per million. Surface water from rivers, lakes, or the sea with marine traffic, nearby pipelines, or regular flooding can be contaminated by hydrocarbons. ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
Beverage producers demand very high purity in the water and many times the water supply from local sources needs further treatment. ...
ByJacobi Group based in Kalmar, SWEDEN