- Home
- Applications
- usa texas
- air flotation
Show results for
Refine by
Air Flotation Product Applications In Texas
12 applications found
Premium
Thermal mass flow meters measure the compressed air used in flotation cells at many of the world's largest mines. ...
BySierra Instruments, Inc. based in Monterey, CALIFORNIA (USA)
Tenco Clari-Float DAF (dissolved air flotation) has been the process of choice for this purpose. Chemical conditioning is sometimes necessary. ...
ByTenco Hydro, Inc. based in Brookfield, ILLINOIS (USA)
Fluence employs the following main technologies to design Waste & Wastewater treatment plants: DAF Dissolved Air Flotation: For the initial extraction of COD suitable for the anaerobic digestion Anaerobic digestion: For wastewater treatment and renewable energy generation Nitrification-denitrification process: For the final treatment of wastewater, in order to comply with regulations ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
The most common treatments are either Anaerobic treatment only with a medium-low biological plant, or a Dissolved Air Flotation followed by a high load biological plant. The benefits are the on-site production of renewable energy, which can be used to reduce electricity and gas consumption; total enhancement of low-value by-products; Production of a high-quality digestate; decrease of the «Carbon Footprint» for wastewater treatment; improvement of the entire wastewater treatment ...
ByFluence Corporation based in PLYMOUTH, NEW YORK (USA)
Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
Kurita America's clarification systems remove suspended solids, turbidity and other particulate from raw water supplies. Whether a traditional solids contact clarifier, high rate, inclined plate or other style, we have a complete clarifier product line and are able to assist in selecting the best technology for your application. Kurita America considers water quality, available space and many other parameters when making equipment ...
ByKurita America Inc. based in Minneapolis, MINNESOTA (USA)
Kurita is committed to understanding liquid-solids separation (LSS) treatment in the water and wastewater industries and partnering with you to provide a comprehensive solution. We understand the characteristics of process streams and priorities vary greatly, creating a major challenge for the design and operation of liquid-solids separation programs. Kurita partners with you to meet your objectives for liquid-solids separation to help develop your water management program, improve operational costs, implement ...
ByKurita America Inc. based in Minneapolis, MINNESOTA (USA)
The process requirements for composites and carbon fiber call for multiple solutions at every stage of production, from manufacturing to recycling. Dürr offers air pollution control systems, as well as customized process drying and curing ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)