Applications
usa virginia
cooling system

Cooling System Product Applications In Virginia

10 applications found

In Virginia Available In Virginia Near Virginia

Water Measurement Monitors for Monitoring Once Through Cooling Water

The Situation:Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil. These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often use once through cooling water systems. The cooling water is taken from ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Premium

Water Quality Management Instruments for Boilers and Cooling Towers

Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...

ByMyron L Company based in Carlsbad, CALIFORNIA (USA)

Water Measurement Monitors for Monitoring Oil in Cooling Water Sector

The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid system. ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Meteorological sensors for solar monitoring industry

The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. ...

ByOtt - Veralto based in Kempten, GERMANY

Industrial water treatment products for Commercial water treatment systems

At many commercial facilities, the time and resources devoted to the operations of a water treatment system are often limited. ChemTreat understands the diverse and unique needs of this sector and provides solutions for the challenges faced within the ...

ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)

Water Measurement Monitors for Monitoring Phenol in Water

The Situation: A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could result in a discharge violation. The local regulators frequently inspected the plant’s discharge to ensure compliance with the ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Industrial water treatment products for chemical processing

Ethylene, styrene, ammonia, methanol, and other chemical producers require sustainable utility treatment results. Our technology focus is on reducing corrosion and fouling, while meeting compliance, safety regulations, and alternative water resource ...

ByChemTreat - Veralto based in Glen Allen, VIRGINIA (USA)

UV fluorescence technology for monitoring of phenol in water

A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

UV fluorescence technology for monitoring oil in power plant cooling water

The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Water Measurement Monitors for Oil Cooler Leak Detection Sector

Power plants, paper and steel mills and other industries with rotating equipment often use recirculated water for the cooling of lubricating, hydraulic, turbine and transformer oil. If an oil cooler leaks, the loss of oil can cause significant damage to the pumps, compressors and motors. High oil & grease water discharge test results can be caused by oil contamination. In some cases, air quality issues can also occur. A UV fluorescence oil in water monitor from Turner Designs Hydrocarbon Instruments can ...

ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you