USA
Applications

Xprt Product Applications In USA

11,110 applications found

Solutions for the emergency spill clean-up

BioSolve Pinkwater eliminates fire and explosion hazard when sprayed directly onto a fuel/oil spill. Aggressive agitation with a course stream reduces volatilization and causes LEL readings to immediately decline, possibly registering “0.” Application of Pinkwater also facilitates roadway cleanup and elimination of hazardous oil ...

ByThe BioSolve Company based in Lexington, MASSACHUSETTS (USA)

Solutions for the equipment decontamination

BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment. Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results. ...

ByThe BioSolve Company based in Lexington, MASSACHUSETTS (USA)

Solutions for the in-situ soil remediation

For over twenty years, BioSolve Pinkwater has been used for Surfactant Enhanced Remediation (SER) to mobilize and solubilize residual NAPL[i], facilitating its recovery and disposal. Depending on soil and plume characteristics, Pinkwater solution can reach contaminated zones through deep injection wells or be gravity fed from surface level injection galleries. After desorbing residual NAPL from soil surfaces on contact, Pinkwater then solubilizes the hydrocarbons in an aqueous emulsion, enabling extraction at down ...

ByThe BioSolve Company based in Lexington, MASSACHUSETTS (USA)

Water treatment solutions for wastewater industry

As a selective oxidizing agent, chlorine dioxide possesses several chemical advantages when compared to the traditional use of chlorine in wastewater treatment. Chlorine dioxide does not hydrolyze in water, and thus it retains its biocidal activity over a broader range of pH. It is also non reactive with ammonia and most nitrogen-containing compounds, and thus effective at lower dose levels than chlorine. It also eliminates phenols, simple cyanides and sulfides by oxidation. Likewise it is effective at odor ...

ByApplied Oxidation LLC based in Chattanooga, TENNESSEE (USA)

Evaporators for Healthcare, Pharma, Cosmetics Industry

Wastewater treatment aiming at reuse for secondary factory purposes, API removal, and disposal costs ...

ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY

Evaporators for Mechanical Industry

Treating metalworking wastewater means the separation of oils, heavy metals and suspended solids, water reuse, disposal costs reduction and sustainability improvement. Mechanical workshops generate effluents containing lubricating oils with significant levels of COD (Chemical Oxygen Demand), hydrocarbons, metals and suspended solids. These workshop wastewaters may come from a variety of operations such as cutting and drilling, molding, cleaning of mechanical parts, paint shops, maintenance, drainages from settling ...

ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY

Evaporators for Food and Beverage Industry

Food and beverage wastewater can be considered as a significant source of environmental pollution. Their management is particularly difficult because of their contents of organic and inorganic substances, suspended and dissolved solids, and their high COD value. Wastewater treatment and reuse for secondary factory ...

ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY

Evaporators for Photovoltaic and Microelectronics Industry

The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant. Wastewater treatment and reuse to reduce the water ...

ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY

Evaporators for Power Industry

EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations. Coal, Gas, Solar, Nuclear. Wastewater treatment for a more sustainable power ...

ByEVALED - Evaporator - Veolia Water Technologies Italia Spa based in Zoppola (PN), ITALY

Surface Aerators for Municipal Wastewater

These industries that purchase Surface Aerators include municipal wastewater plants, wineries, breweries, aquaculture farms, dairy farms, horticulture nurseries, hog and cattle feedlot operations, mining operations, chemical companies, food processing plants, and miscellaneous industrial wastewater operations among others. In addition VaraCorp sells hazardous duty aerators to frac pit operators. VaraCorp’s air turbine surface aerator can transfer 4.7 pounds of dissolved oxygen per horsepower hour according ...

ByVaraCorp LLC based in Wimberley, TEXAS (USA)

EDXRF spectrometers for environmental applications

Air pollution, soils, grounds and wastewater Xenemetrix Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers bring expanded capabilities to environmental monitoring through the combination of proven detection methods with innovative technologies, including regulatory monitoring for compliance and ...

ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL

Applications and Air Pollutants Removed in the Pulp and Paper Industry

Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge and fired boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas ...

ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)

Water Chloramination for Industrial Wastewater Treatment Industry

ByIn-Situ Process based in Fort Collins, COLORADO (USA)

Geotextiles solutions for landfills areas

Historically, landfills have been the most common method of organized waste disposal and remain so in many places around the world. Landfills are essential applications to ensure long service life and prevent soil pollution. In industrial basins, TenCate protection geotextiles guarantee the protection of the geomembrane against all risks of mechanical damages. A cost effective and environmental friendly solution to sort, treat and recycle ...

ByTenCate Geosynthetics Netherlands bv based in Hengelo, NETHERLANDS

Gas monitoring instruments and systems for stack testing

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas analyzers and monitoring systems for waste incineration sector

Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for DeNOx process control

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for engine emissions measurements

The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for nitric acid process

Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Gas monitoring instruments and systems for semiconductor manufacturing

In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...

ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you