- Home
- Applications
- USA
- drilling fluid
Refine by
Drilling Fluid Product Applications In USA
15 applications found
Today's construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse. Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
The leading supplier of drilling products in North America. Our complete line of professional products are specially designed to enhance the cost-effectiveness of drilling operations by controlling and improving drilling fluid properties. Each and every drilling product is supported by our experienced team of field engineers and research ...
ByCETCO based in New York, NEW YORK (USA)
The safety of all personnel on the rig is a priority. With elevated drilling fluid temperatures, there is an increased risk of possible injury. According to the American Burn Association, human skin that comes in contact with a fluid hotter than 155°F / 68°C can result in a 2nd degree burn in less than one second and can result in a 3rd degree burn in just one ...
ByDrill Cool Systems, Inc. based in Bakersfield, CALIFORNIA (USA)
As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target properties of the drilling fluid, centrifuges also lower the volume of waste drilling fluid and reduce raw material additive ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Measurement of drilling fluids is a complicated and variable task. A real-time measurement is paramount to well integrity. The Red Meter successfully interrogates fluids going to and coming from the well in addition to providing a relationship analysis between the two lines. Accurately measuring where other devices have failed because of fluctuations and difficult-to-measure variables help crews avoid kicks and maximize drilling efficiency. ...
ByRed Meters based in Orlando, FLORIDA (USA)
Saving Money, Time, and the Environment Through Chemistry A General Process Philosophy Description of Elgin’s Drilling Fluid Dewatering Systems. The drilling industry is regulated by a myriad of environmental regulations that protect our air, water, and land resources. As these regulations continue to evolve, so too must the technologies utilized by the drilling industry. Though lowering compliance costs is always a worthy initiative, ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
The HDD, trenchless and underground construction industry has realized the benefits and economics of recycling drilling fluid and slurry. With increased transportation costs and more stringent environmental enforcements and overall cost containment, the need for recycling is evident in all countries and across the range of trenchless applications. ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering ...
ByElgin Separation Solutions based in Stafford, TEXAS (USA)
Fifty years later, during the oil crisis of 1979, Kern Steel Fabrication invented the Geo-Cooler to support the geothermal industry’s efforts to perform closed-loop drilling, which reduced the environmental impact of drilling. Well temperature control was needed to dissipate heat from the drilling fluid, otherwise it would accumulate heat and turn to ...
ByDrill Cool Systems, Inc. based in Bakersfield, CALIFORNIA (USA)
Potassium chloride is widely used for drilling and processing fluids for oil and gas well perforation and killing. ...
ByUralkali Trading SIA based in Riga, LATVIA
Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling ...
ByNLB Corporation based in Wixom, MICHIGAN (USA)
Drill Cool Systems is an integral member of the well design team. We share our extensive experience earned while operating on High Pressure High Temperature (HPHT) wells all over the ...
ByDrill Cool Systems, Inc. based in Bakersfield, CALIFORNIA (USA)
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-EDRO, includes EDRO UV module used to detect hydrocarbons in the C10 to C36 diesel and oil range. This is our most popular model. The analyzer is factory calibrated using Sitelab's EDRO calibration kits for testing soil or water. This test matches well to U.S. EPA Method 8015M and many other TPH methods using GC-FID ...
BySitelab Corporation based in West Newbury, MASSACHUSETTS (USA)
Oil and gas extraction and processing has some extremely demanding industrial applications. There are various operations within this energy sector which utilize JWC’s Monster Industrial grinders for drilling mud solids control and to shred down tough debris which can disrupt operations and cause expensive repairs. Our grinders are also used to protect pumps in tank cleaning equipment minimizing ...
ByJWC Environmental based in Santa Ana, CALIFORNIA (USA)
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-FNGP, is used to fingerprint and identify the age or type of contamination on your site at a fraction of the cost compared to conventional laboratory forensic analysis. The equipment is easy to use and samples take just a few minutes to analyze. Test samples for GRO, EDRO, PAHs and TPH-Oil using the four UV modules included with the instrument. ...
BySitelab Corporation based in West Newbury, MASSACHUSETTS (USA)